Removing the Front Door Trim Ford Focus 2 ~ VIVAUTO.RU

How to remove the front door trim of a Ford Focus 2

front door Ford Focus 2
In order to carry out such work of replacing or removing trim or other parts, the motorist requires certain skills and knowledge. In the field of cars. repair. However, sometimes even these are not enough to understand how this or that car part is removed, especially if you have no idea how to remove or replace a part, then you need (information), or pay the technicians at the service station.

Remove the bottom half using a flat-head screwdriver

And so, for example, one day my electric door lock failed, I didn’t have to think long! since I do car repairs. I am writing this article for those car owners who have no repair experience, I will try to enlighten those who encountered such a problem for the first time. act logically

In this article I will try to show and explain in detail how to remove the door trim of a Ford Focus 2 with my own hands .

To understand how to disassemble the door of a Ford Focus 2, we need to determine what tools we need. There are very few of them, only four.

Removal

The engineers didn't come up with anything special here. The casing is dismantled quite simply. But, there are several nuances that need to be taken into account. The work itself is carried out in the following order:

The negative terminal is removed from the battery. This will avoid short circuit;
The decorative mesh covering the rotation mechanism of the exterior mirrors is removed. It is attached with clamps, do not break them;
Slide the door handle trim forward and remove it;
Using a screwdriver, pry up the armrest pad and then remove it. Do not break off the fasteners;
Remove the wiring blocks from the power windows and mirrors control units;
Unscrew the 2 screws securing the armrest;
Remove the trim. It is mounted on plastic pistons; when dismantling you will probably break several of them. Stock up on this consumable in advance.

Assembly is carried out in reverse order. The trim on the rear door is attached in the same way. The only difference is the need to remove the window handle. To do this, take a slotted screwdriver and move the latch, which secures the handle.

Step-by-step instructions on how to remove the FordFocus door trim

1. First, lower the window to make it easier to remove the side mirror.

2. How to remove the side mirror mesh

How to remove a side mirror

3. To remove the mesh you need to pull it towards you; it is fixed with latches.

4. Now you need to remove the door seal. Be very careful and careful not to tear the seal or damage the brackets. If you are careful they can be reused.

5. Take a flathead screwdriver and install it into the slot in the armrest. Then carefully lift it up and pull the lower part of the armrest towards you.

Unscrew the bolt with a 10mm plier.

3. Then you need to take a TORX T25 key and unscrew the fastening bolt with it. In the photo above you see a red circle that marks the only bolt that is screwed onto the door mirror, take a TORX T25 key and use it to unscrew it.

After which we pull off the entire frame of the tweeter (or the inner panel of the side mirror). It is held on by just one plastic clip and one guide. Disconnect the plug from the alarm sensor that is activated when the doors are opened.

We remove the wiring, they cannot be confused and yet we can distinguish them by color.

pull out the wiring block from the body arch jay

The yellow arrow shows the electrical adjustment plug, which also needs to be disconnected. The green arrow indicates the speaker plug.

remove the door armrest cover

Afterwards you need to take a TORX T25 key and unscrew two 10mm bolts, which we won’t see until we remove the door handle cover.

Removing the front door trim for Ford Focus 2

Next, we pry up the frame of the inner handle, pull it towards ourselves and move it forward in the opposite direction from the handle and disconnect the glass lift plug. And we look at removing the inner handle of a Ford Focus 2 here.

We disconnect all the wiring connectors that go to the lift, mirror adjustment, and to the radio speakers.

Removing the front door trim for Ford Focus 2

This is what your trim looks like from the inside after dismantling the front door of a second generation Ford Focus restyling.

Disassembly process

To understand how to disassemble the door of a Ford Focus 2, we need to determine what tools we need. There are very few of them, only four.

flat screwdriver;

head on "8";

TORX T25 key;

pliers.

The latter, by the way, will be needed for one single purpose - to pull the caps out of the metal, and they will 100% remain when the casing is removed. In general, the Ford Focus is a simple car and the process of disassembling the doors is unlikely to cause any particular difficulties, but, nevertheless, it is better to understand how everything is done step by step.

How to remove the trim

So, to disassemble the door of a Ford Focus, you need to do the following:

Removing the protective mesh. To do this, you first need to lower the glass, pull the mesh towards you (it is attached to latches, so it will not be difficult). Now all that remains is to unscrew the fastening screw, which is done using the aforementioned TORX T25 wrench.
Remove the sealant layer. It is extremely important to try not to damage the brackets or lose them.
Removing the armrest. Carefully insert the above screwdriver into the slot of the armrest, lift it up and pull the lower part of the armrest towards you.
Removing the casing. This is done using the same “8” head. You just need to unscrew the two bolts on which the sheathing layer is attached, and then simply disconnect all the connectors.
Removing the handle trim. Using a screwdriver, you need to very carefully pick up the handle edging, after which you need to slowly pull it towards you and remove the edging. Once it comes out, you just have to pull it off the handle.
The last step makes it possible to remove the casing as well. Just pull it towards you by the hole. When the corner comes off, you will hear the clicks of the pistons coming out of engagement. If this does not happen, the pistons can be pulled out with simple pliers.

To reinstall the trim on a Ford Focus, all these steps must be performed in reverse order. In fact, the procedures for removing the trim are extremely simple.

How to disassemble the doors themselves

Removing the trim will help you see the window regulator, in some cases the sound system, the opening mechanism and all other communications.
All this can be easily removed using a head and disconnected from the door. You must first disconnect the plugs from the speaker and any other wires that go to the communications located in the door. After this, you need to unscrew the handle. This is done using a regular shaped screwdriver; there are not many screws, so this operation should not cause any special problems. The first step is to unscrew the support frame, which basically holds the handle itself.

The next step is to remove the traction point, which is done by disconnecting the communication from it. In general, all of the above-mentioned communications are conveniently located on one single panel; to disconnect it, you just need to remove the seals. It remains to disconnect only one large plug from the central locking system.

In general, disassembling the doors on a Ford Focus 2 should not cause any particular difficulties, because the system is extremely simple. In fact, everything can be easily understood and purely intuitive, but it is better to follow the instructions described above. This will at least make it possible to know what is located where.

How to remove the front door trim of a Ford Focus 2

How to remove the rear door trim ford focus 2

Ford Focus 2 door disassembly

How to remove the door trim on a Ford Focus 2

In order to repair or improve the equipment of a car, sometimes it becomes necessary to remove plastic trim parts. If on cheap and old cars this process is carried out using barbaric methods with the possible subsequent replacement of old panels, then for normal cars such methods do not work. It is best to adhere to conservative methods, taking into account only those methods that do not damage the mechanisms and parts of your car.

Many owners of hatchbacks and sedans with German roots have a question about how to remove the door trim of a Ford Focus 2. A plastic card covers the power windows, speaker, and the metal part of this very door. Parts are disassembled not only for repairing window regulators. They will also need to be disassembled to improve the sound insulation of the side of the car. Let's figure out how this difficult procedure is performed.

About the differences in the process of removing the trim from Ford Focus 1, 2 and 3

In short, there are no differences in the procedure for removing the trim depending on the version of the Ford Focus. Now a little more detail. As you know, cars of this model have undergone so-called restyling twice since their release in 1999. The second version of the Ford Focus began to be produced in 2008, the third - in 2014. All changes mainly affected the car body. The headlights, the shape of the mirrors and the dashboard have also changed. In the third version, engineers once again changed the central and floor consoles, bumper, hood and radiator grille. We added a heated steering wheel and perpendicular parking system. The engines and chassis of all versions of the Ford Focus remained unchanged, as did the door trim. Therefore, the procedure for removing the door trim, which will be discussed below, is suitable for all versions of this car, regardless of the year of manufacture.

What tools and materials will you need?

The main tool will be the arms that grow from the shoulders. One wrong move or excessive force will cause the card to break or be severely damaged. You will need a thin flathead screwdriver, several sizes of Phillips screwdrivers, a torx screwdriver (TORX T25), a powerful knife (may not be useful, but it is better to have one), as well as a special tool for carefully dismantling plastic parts.

A special tool for removing the card must meet the following characteristics:

the material must be soft; it is best to make such a device from plastic or plexiglass;
it is necessary that one of the edges of this device is thin (plexiglass can be carefully sharpened);
the sizes may be different, but it is best to have one sharp and narrow edge, and the other long edge;
The product should not break during the work process, otherwise it will scratch the card details.

To remove the door trim of a Ford Focus 2, a set of polymer spatulas is suitable. You can use some types of plastic scrapers to clean your windshield. Such devices will help you quickly cope with dismantling work and largely protect your car from damage. You should not pry the plastic with a metal screwdriver. This will damage it. At a minimum, there will be unpleasant traces that will be very difficult to hide in the future.

Selecting a Material for complete sound insulation of a Ford Focus car.

How to Remove Steering Rack Ford Focus 2
1. Vibroplast m 1 size 70cm. at 50cm all sheets come in one size; price 150r for one sheet.

2. Vibroplast m2 goes to (roof) price 250 rub.

4. Sound insulation Stizol A 4 ks, Barrier 4 ks on (floors) the same 250 rub. For one sheet.

5. sound insulation Bioplast A 10 k (1.0-2.0 m) Sound insulation costs more than 300 rubles. per running meter,)

6. Flexible knife

7. Stitching roller

8. Degreaser

10. Scissors

11. Marker

12. Roulette

How many; You need all the materials - prices; Frame weight, 20 sheets, vibrating. and knocked down, sound insulation, one sheet, vibroplast - 150 RUBLES, SHUMKA comes in rolls, 300 rubles per running meter. This material will cost in full, for a Ford Focus 2. 8000 thousand rubles, (First) they glue the vibroplast. (second) stage measure the part and cut it, sound insulation exactly to size, and glue it on top of the vibroplast. And roll it in with a roller, and leave no gaps,

soundproofing sheets for cars

The process of removing the door card Ford Focus 2

The instructions described below apply to removing the driver's door trim, but almost all the steps can be applied to other door cards. It is worth being attentive to various modifications and improvements of your car, taking into account the features of its configuration and additional equipment in the cards. But in general, the procedure always looks about the same. You need to carry out work in a well-lit place, and you will also need additional light. The ideal solution is a headlamp with bright daylight.

So, to disassemble the casing, you need to perform the following procedures:

Using a plastic spatula or a pre-made plexiglass tool, carefully pry off the door handle trim. If there are buttons and controls on the plastic part, you will need to disassemble them and discard the terminals.
Using the same plastic spatula, carefully separate the two separate armrest segments. With your free hand, pull the lower segment towards you. As soon as the latches come out of the hook spots, remove the lower part of the handle.
Lower the glass and remove the plastic cover of the tweeter speaker at the top. Using the sharp edge of the shoulder blade, gently move it towards you and help with your hand. Next, under this cover, use a star screwdriver to unscrew the card mount.
Carefully and effortlessly remove the rubber door seal. It is better to remove it around the entire perimeter, as it will interfere with all planned work.
Under the previously removed lower part of the armrest there are two mounting bolts. They have a size of 8 mm; it is most convenient to unscrew them with a socket wrench or a head of the appropriate size.
At the same location, disconnect the connectors connected to the power windows and other equipment in the door. Check that there are no electrical contacts left connected.
Next, use the resulting gaps to pull the upper part of the casing towards you. Moderate efforts will be relevant in this case. As soon as the pistons begin to come out of the hooks, you can safely remove the card, snapping off one piston after another.
Count the broken pins and buy the required number to properly secure the card after assembly. Otherwise, the plastic part will constantly rattle.

Removing the trim from the front door of a Ford Focus3

The third generation Focus was produced for seven years, until 2020. The generation was modernized in 2014. In 2020, the fourth generation of cars entered the market, the lines received updated body shapes and new engines.

Removing the driver's door card on the Ford Focus 3 model is quite simple. As with previous generations, repairs can be carried out in 15–20 minutes. The main tool for working on Focus 3 remains a plastic ruler and a thin flat-blade screwdriver.

Use a ruler or screwdriver to pry off the corner of the decorative trim near the front pillar.
Remove the panel from the door handle, unscrew the two screws.
At the end, remove the plug and reflector, unscrew the screws hidden under the protective covers.
Pull out the plug in the handle.

The driver's door trim is installed on 6 pistons. It is necessary to carefully pry up the casing, starting from the bottom corner, applying force, and carefully snap the clips out of their places. Under the casing, the door is protected by a steel sheet in which there are technological holes for clamps with an exposed block of electrical cables.

Results - how long does it take to disassemble the casing?

To remove the card for the first time, you should allocate about 2 hours for this. At the service, a specialist completes the job in 10-15 minutes, but rushing will not be useful to you. To gain the skill, you need to independently understand the design of the door, complete all the work without unnecessary haste and without potential problems. Otherwise, you may damage the plastic parts, which will lead to serious problems in the future. You will have to look for elements in stores and spend a lot of money on restoring the interior.

It is quite possible to dismantle the door card on a Ford Focus 2 on your own. This procedure is simple, but must be done with the utmost care. You may need to find or make a special tool to carefully remove the plastic parts.

If the material was interesting or useful for you, publish it on your social network page:

Removing the front door trim Ford Focus 2

Removing the front door trim may be necessary in a wide variety of situations. For example, to repair lock mechanisms, adjust power windows, replace glass, install sound insulation, repair door damage, or detect corrosion or metal cracks. Whatever the reason for disassembling the door, all work should be performed as carefully and carefully as possible, trying not to damage the plastic casing, wiring, and fasteners.

The only tools you will need are screwdrivers, a plastic “spatula” with which you can pry off the plastic linings and panels without the risk of scratching their surfaces, and a TORX T25 wrench. You should also take care in advance of clean surfaces on which you can place parts, components, and glass. By the way, if glass replacement is not required, it can be secured to the door frame with masking tape.

Separately, it should be noted that for any repairs and maintenance, only original spare parts should be used. Chinese analogues, which literally flood the Russian market, often require additional processing, sharpening, and adjustment. This, in turn, requires the involvement of extra time and material resources, and sometimes the help of highly qualified specialists. To make repairs more economical, you can buy used spare parts for Ford Focus 2 on our website. They are in no way inferior to more expensive new ones and are completely recyclable.

How to remove the door trim on a Ford Focus 2?

The process of removing door trim on a Ford Focus involves the following sequence of actions:

Removing the protective mesh for the tweeter speaker. To do this, you need to lightly pry it and gently pull it towards you, removing it from the two point latches. After this, use a key to unscrew the fastenings of the speaker itself.
Next, remove the seal. This should be done very carefully, trying not to damage both the seal itself and the brackets, which can also easily get lost.
After that you can proceed to the armrest. You need to insert a screwdriver or a plastic “spatula” into the gap, lightly press and pull the lower part of the armrest toward you, removing it from the latches.
Under the upper part of the armrest you will find mounting bolts responsible for fixing the trim. They need to be unscrewed, and then, holding the wiring harness, disconnect the block from the connector of the power window control unit.
Using a screwdriver or a spatula, pry up the edge of the handle, pull it towards you a little, and then to the right, removing it from the latches.
Then you can begin to directly remove the casing. When prying up the plastic with a screwdriver or a spatula, you should carefully pull it towards you, trying not to tear off the pistons. In cases where the caps remain in the metal, do not despair - they can be easily removed using pliers.

A little patience and accuracy will ensure smooth removal of the casing without the involvement of outside help. Reassembling the door is carried out in the exact reverse order.

You can buy used spare parts for your car on our website

If you need high-quality used Ford Focus 2 spare parts at affordable prices, please contact. We provide the most comfortable conditions for interaction to all categories of clients:

Adequate prices;
Payment in cash and by bank transfer;
Prompt processing of applications;
Official guarantees for all presented titles;
Professional assistance in choosing components;
Delivery throughout the city and regions of the Russian Federation.

We sell original and high-quality used spare parts for Ford in Moscow inexpensively, without overpayments or markups, wholesale and retail, guaranteeing their 100% suitability for further use.

Removal from Ford Focus 3

Front door

The corner is carefully pryed off with a flat plate or ruler.

Using a plastic ruler, remove the corner of the trim

The plastic panel is removed from the door handle

The marked bolts are unscrewed from their sockets

The plastic plug is removed and the bolt behind it is unscrewed.

Behind the reflector there is another bolt that needs to be unscrewed

The plug is removed by pressing the red dot

The door trim is secured with six clips

The technological holes of the door are located under the clips

Video: Removing the front door trim

Backdoor

The window lifter handle is removed: it is secured with a latch, so you just need to carefully pry it off and pull it towards you.

The handle is attached with a latch, so it can be easily removed

To remove the handle, you must unscrew both bolts

There are two screws behind the handle trim

To remove the handles and trim, you need to unscrew the screws hidden behind the plugs

Bolts are hidden behind plastic plugs