Replacing the steering wheel on a VAZ 2110

Replacing the steering wheel on a VAZ 2110 yourself

Replacing the steering wheel of a VAZ 2110

Almost every motorist is familiar with the phenomenon of steering wheel play. Usually, if the reason is in the steering wheel, then the steering wheel is replaced on a VAZ 2110. This article presents step-by-step instructions that show how to replace the steering wheel on a VAZ 2110, which aims to change the steering wheel to a more comfortable one.

Replacing the steering column bearing of a VAZ 2110

If you have to replace the VAZ 2110 steering column bearing, then I recommend that you read the step-by-step guide to replacing the VAZ 2110 steering column bearing:

The first step is to remove the wires from the battery.

Loosen the bolt securing the steering column switches, try to move it towards you.

Remove the horn pads.

Disconnect the block with wires that comes from the ignition switch. The steering column is secured with special bolts with a breakaway head. These bolts can be replaced with M6 bolts 20 mm long.

2 nuts and 2 bolts need to be unscrewed, then remove the washers.

Remove the steering column.

Remove the steering column by sliding it off the shaft.

Press the bearing off the shaft.

If the splines on the shaft are damaged, I recommend replacing the shaft.

If you have any problems replacing bearings, then I recommend watching this video:

All about the VAZ steering wheel

Replacing the steering wheel of a VAZ 2110

First of all, you need to understand this important truth: the safest steering wheel is the one that was initially installed on the vehicle by the manufacturer. It was developed specifically for a specific car model, passed the necessary tests and is in accordance with current regulations. However, the design of the standard VAZ 2110 steering wheel is not to the taste of many and leaves much to be desired: the rim is very thin, there is no comfort and convenience when hands touch its surface, it is smooth, cold to the touch in winter and slips in the hands in summer. Therefore, car owners quite often think about replacing the standard steering wheel with a steering wheel from a different manufacturer, purchased in a specialized store. Also, the need to replace the steering wheel may arise due to the appearance of abrasions on the top, if there is a need to repair the sound signal.

Note. It should be remembered that, despite the large assortment of steering wheel models offered, quite often they are questionable in terms of safety and quality.

VAZ 2110 steering wheel removal

It should also be remembered that, according to the current rules, replacing the steering wheel of a vehicle is actually considered making changes to its design.

Of course, you can put different covers and leather, rubber or fur braids on the wheel, but it’s still not always possible to get a comfortable steering wheel this way.

Steering rack repair

For convenience, clamp the rail in a vice.
Using a slotted screwdriver, pry up and remove the locking plate of the rods.

Unscrew the two tie rod mounting bolts and remove. Fifteen head bolts.

Using wire cutters, cut off the clamps securing the boot and side plugs.

Remove the side plugs and boot.

Use a special wrench to unscrew the rack adjusting bolt.

Remove the spring and rubber O-ring.

Pull out the pinch roller by hitting the rack against a wooden stump or something similar. After a slight blow, the roller will fall out.

Unscrew the two bolts of the rack shaft cover. Five hex bolts.

Remove the shaft boot, cover and needle bearing.

Remove the rack shaft from the housing. Clamp the shaft through a rag in a vice and strike it upward against the rack body; it will come out of the seating area. You need to hit it with a rubber hammer.

Pull the “rasp” out of the rail through the left side.

In the rack body, knock out the bushing using an extension. Most often, the knocking of the rack lies in the wear of this bushing.

Clean the rack housing and lubricate it. Also lubricate the seat for the new bushing. Use “Fiol” lubricant.

Using a piece of tube of suitable diameter, press the bushing into the seat. There is no need to hit the pipe with a hammer; plant it by hand. The bushing must be lubricated before installation.

Assess the condition of the rasp, then clean off the old lubricant and apply new one. Replace it if necessary.

Install the “rasp” into the body and guide it through the bushing.

Insert the shaft, align the gears and use a brass hammer to hammer into place.

There is no point in describing the assembly in detail further, but we recommend paying attention to the following points:

Don't forget to use the new O-rings from the repair kit and boot.

Before installation, lubricate the pinch roller and needle bearing.

Check the condition of the silent blocks on the steering rods.

The process of repairing the steering rack of a VAZ 2110 is clearly shown in this video:

Choosing a steering wheel is a responsible matter

Sports steering wheel VAZ 2110

In the process of choosing a suitable steering wheel, you should take into account that a small steering wheel on a car without a VAZ power steering or rack will be much heavier, and a steering wheel with a larger diameter will be much more convenient to turn.

Note. The height of the driver should also be taken into account; for example, drivers with long legs may rest their knees on the large steering wheel while shifting the throttle or shifting the clutch.

A small sports steering wheel is not suitable for driving in the city, but would be more appropriate in a rally or on a high-speed track. A large leather-trimmed steering wheel with a wide rim is ideal for a comfortable and convenient ride. It is also recommended to hold and rotate the new steering wheel in your hands, simulating maneuvering.

Note. This is very important, since the further ease of use of the selected steering wheel will depend on this.

Replacing a car steering wheel with a steering wheel with a modified design may lead to some changes regarding the ergonomics of the driver's workplace. In addition, the force on the steering wheel also changes, which to some extent causes violations of passive safety in the car.

Comfort steering wheel for VAZ 2110

Replacing a VAZ steering wheel

Steering wheel play VAZ 2110

For each steering wheel, factory standards apply, according to which the permissible force on them and the resistance that the structure itself can withstand are determined . That is why, if you plan to replace the steering wheel, it is recommended to give preference to a traditional steering wheel with an additional braid made of materials that provide higher reliability of contacts with the surface of the steering wheel rim. The procedure will require the following materials and tools:

Phillips screwdriver;
Head “24”;
New steering wheel;
A piece of wire or wire;
Chalk, marker or something else for marking.

Removing the steering wheel

Replacing a steering wheel is not as difficult as it seems at first glance. When replacing the steering wheel, it is first removed. This procedure is carried out in the following order:

Note. Before carrying out work, do not forget to remove the key from the ignition switch.

First, the car must be installed on an inspection ditch or lift;
Then the hood of the car is lifted and the terminal of the “negative” wire is disconnected from the battery terminal;

Note. The disconnection of the terminal is due to the fact that there are electrical connections in the steering wheel. By turning off the power, you can prevent short circuits and unwanted connections between electrical wires.

After this, the car’s wheels are turned to the left or right;

Note. The steering wheel is turned until the device is activated, which locks the steering shaft.

Markings are applied to the steering wheel and dashboard;
Then the seven screws securing the steering column casings are unscrewed and the lower steering column casing is removed;
By unlocking the steering column adjustment lever, the column moves down. After this, moving up reveals the upper steering column casing;

Using a screwdriver, pry up the cover plate of the signal switch and remove it;
Using a Phillips screwdriver, unscrew the two screws that hold the horn button and remove the cover;

Note. You should be aware that the steering wheel sits quite tightly on the splines and if removed abruptly, injury may occur. That is why it is recommended to unscrew the nut completely only after the hub has come off the shaft splines. The nut will protect you from injury.

Using a 24mm socket, the nut that secures the steering wheel to several threaded screws is unscrewed so that it can move;
With rocking, the steering wheel is pulled along the shaft splines.

Note. If the steering wheel cannot be moved by hand, an assistant may be required. One needs to pull the steering wheel towards himself, and the second one needs to strike the end of the steering shaft with a hammer through a drift made of soft material.

Before finally removing the steering wheel, you should remember, or better yet, mark its position relative to the shaft, as well as the position of the turn signal switch in relation to the plastic ring;
After unscrewing the nut, the steering wheel is removed;
After aligning the two wheels, the mark is transferred from the removed steering wheel to the new one that is planned to be installed.

Installation of a new steering wheel

Installing a new steering wheel is performed in the reverse order of removal:

During the installation process, the steering column switch is set to the neutral position, after which installation can be carried out.

Note. To prevent the nut that secures the steering wheel from falling out of the head during installation on the shaft, a wire or several strands of wire of the required diameter are inserted between the head and the nut.

After tightening the nut, the head is removed and the wire is removed, after which the nut is tightened.
Also, when installing the steering wheel, you should turn the turn signal switch ring so that the pin on the hub fits into the groove of the ring (the ring returns the turn signal switch to its initial position when the car exits a turn).
When replacing a steering wheel with a new one with an adapter, it becomes necessary to install an adapter on the shaft. The new steering wheel is installed in such a way that it cannot come off while driving. The central nut is secured, after which the decorative plug is put on.
Then the negative wire is connected to the battery, the functionality of the sound signal and the steering column switch is checked.

Checking the newly installed VAZ 2110 steering wheel

After all the necessary work has been carried out, it is necessary to check the correctness of its implementation. To do this, the wheels are installed in a level position. If, in this position of the wheels, the steering wheel is not skewed and is in a strict central position, without shifting to the side, then the installation was carried out correctly.
In the case when the steering wheel spokes are located asymmetrically while the vehicle is moving directly on a flat horizontal platform, it is necessary to stop the car in this position, remove the steering wheel and install it correctly, then again check the accuracy of the installation while driving.

How to remove the steering wheel on a VAZ 2110 and 2112? As easy as pie

It is advisable for the driver to know how to remove the steering wheel on a VAZ 2110 and 2112. This will be useful in many cases. Moreover, despite its apparent simplicity, this work is quite difficult, especially for beginners. But even experienced drivers may encounter difficulties, because the dismantling method is not obvious. Also, some rash actions can lead to damage to the steering column, which will require more serious and expensive repairs in the future. Therefore, it is recommended that you carefully study the instructions before starting to work with this unit. This way you are guaranteed to do everything necessary and not receive any negative consequences.

How to remove the steering wheel on a VAZ 2110 and 2112? The answer to this question is not as complicated as it seems. Mounting it is quite simple, which makes it possible to optimally solve this problem even if you are a beginner. In general, there is nothing complicated

. But you still have to tinker a little, because the steering wheel fastening is quite reliable and ensures its full functionality in any conditions.

When will dismantling be required?

First, you need to figure out in what cases it is necessary to remove the steering wheel. This will allow you to orient yourself in advance and prepare everything you need. It's worth noting that there are actually few reasons for doing this. This is probably the most reliable design element of VAZ cars. But such work may still be required.

First of all, the steering wheel must be removed if it is replaced. It is changed in the following cases:

Malfunction;
Loss of appearance;
Replacement with another model.

Malfunction

It’s hard to imagine a steering wheel on a VAZ 2110, but sometimes this happens. Most often, the reason is worn splines. Because of this, backlash occurs, and the car reacts worse to your actions. If you suspect such a problem, it is better to replace it.

Also, drivers often decide to replace the steering wheel due to loss of appearance. The reason is constant contact with the hands of the person driving the vehicle. Therefore, over time, the casing wears off, and not all drivers use the braid. In such a situation, the best solution would be to simply change the steering wheel or buy a steering wheel cover.

Another option is to replace it with another model. Essentially this is tuning, and we will consider this issue separately.

It is also often necessary to remove the steering wheel in connection with the repair of certain parts. The steering wheel is removed if it interferes with operation. For example, drivers often prefer to remove it when working on the dashboard. You will also need to remove this part when repairing the steering column.

What else is worth knowing

To simplify the process of removing the steering wheel, especially if the element cannot be removed from its permanent place for a long time, you can hit the area a little so that the pressure is applied to the edge of the steering wheel.
It is best to use an assistant when performing this work, who will begin to pull out the part while the car owner lightly taps on it. After the cause of the breakdown has been eliminated, you need to reassemble the steering wheel in the reverse order. Before assembling the structure, the switch should be turned so that the hub pin engages with the connecting groove. A correctly rotated wheel will help automatically return the switch to the correct position, thereby simplifying the installation of the entire structure.

The information provided, we hope, will help simplify both the removal and assembly of the steering wheel on the VAZ-2110, so that the car owner can do all the work himself. And if difficulties still arise during the process, you can watch an additional video with instructions.

Sources:

https://autoflit.ru/2411-kak-snyat-rul-na-vaz-2110-i-2112-prosche-prostogo.html https://vaz-remont.ru/kak-snyat-rul-na-vaz -2110-svoimi-rukami-poshagovaya-instrukciya/ https://umelyeruki.info/avto/snyatie-i-ustanovka-rulya-vaz-2110/ https://remont-vaz2110.ru/snyatie-i-ustanovka-rulya / https://masteravaza.ru/rulevoe/rul/zamena-rulevogo-kolesa-na-vaz-2110-487 https://ladaautos.ru/vaz-2110/kak-pravilno-snimaetsya-rul-v-vaz- 2110.html

Which steering wheel should you choose?

If you decide to replace the steering wheel, then you need to decide what part you need to purchase. It is worth noting here that for this car, in addition to the standard ones, sports parts are also offered. The sports steering wheel has a smaller diameter. It also has special metal linings that perform a decorative function. Please note that you will have to get used to the small disassembly of the steering wheel for some time.

It is also possible to select a steering wheel from another model. For example, we may be talking about a part intended for Lada Kalina, in which case there will be no problems with installation. There are also other suitable analogues. When choosing, pay attention to the size of the splines; the depth of seating of the steering wheel on the column is also important.

You should choose a steering wheel to replace based on your preferences.

You should be comfortable, in which case you will not experience any problems during the management process. It is also worth considering some legal requirements. Some types of steering wheels cannot be installed, as you will not be able to pass a technical inspection. Be sure to take these nuances into account.

Removing the steering column

In this article we want to share with you such useful information as removing and installing the steering column. First, you should explain what a steering column in general is and what its functions are in your car.

The steering column is a specific plastic casing, inside of which the steering wheel shaft is located. One of the main functions that it performs is to guarantee safety for the driver and passengers in the car in the event of a collision with any obstacles, as well as transmitting the forces applied to the steering wheel, unhindered, simple and easy rotation of the steering wheel fork and directly ensuring strong fastening.

Diagram of VAZ 2110 steering column parts:

Let's proceed to a step-by-step description of the process of replacing this part. The work should be carried out when replacing parts and steering components of VAZ 2110, 2111, 2112 (Zhiguli) or when dismantling the instrument panel.

Required Tools

To work, you will need a number of tools that will help you in the process. In fact, the list of necessities is small, but it is better to have everything you need on hand in advance. This will make your task easier.

Nothing more is needed. In general, you can cope with the task only using the listed devices. Sometimes drivers wonder if they need an assistant for this job. In principle, you can cope on your own. But sometimes difficulties may arise during dismantling. In this case, you will need help, but this happens very rarely. As a rule, with the right approach, this repair occurs without any problems or complications.

Let's take a step-by-step look at how to remove the steering wheel. This will allow you to understand the principle of operation and avoid any mistakes in the process. So, withdrawal is carried out in the following order:

To begin, place the wheels straight. You don’t have to do this, but in general it will be easier to work with the steering wheel positioned straight;
Using a slotted screwdriver, pry up the horn trim and remove it. In order not to break the part, you should pry it as evenly as possible;
Using a Phillips screwdriver, unscrew the 2 screws that secure the horn cover;
The cover is removable, in some cases it needs to be pryed off with a screwdriver;
The horn contacts are secured with self-tapping screws. Unscrew them;
The wire is disconnected from the contact and removed;
Use the socket to unscrew the nut. There is no need to unscrew it completely, just loosen it;
Grasp the steering wheel with both hands and pull it firmly towards you. This will allow you to remove the part from the splines. A nut that is not fully twisted will prevent the steering wheel from suddenly being torn off the column;
Unscrew the nut completely and remove the steering wheel.

How to remove?

To begin, place the wheels straight. You don’t have to do this, but in general it will be easier to work with the steering wheel positioned straight;
Using a slotted screwdriver, pry up the horn trim and remove it. In order not to break the part, you should pry it as evenly as possible;
Using a Phillips screwdriver, unscrew the 2 screws that secure the horn cover;
The cover is removable, in some cases it needs to be pryed off with a screwdriver;
The horn contacts are secured with self-tapping screws. Unscrew them;
The wire is disconnected from the contact and removed;
Use the socket to unscrew the nut. There is no need to unscrew it completely, just loosen it;
Grasp the steering wheel with both hands and pull it firmly towards you. This will allow you to remove the part from the splines. A nut that is not fully twisted will prevent the steering wheel from suddenly being torn off the column;
Unscrew the nut completely and remove the steering wheel.

In some cases, the steering wheel will not budge. In this case, you will need help. Your assistant will hold the steering wheel, and you need to apply strong blows with a hammer through a soft drift. This will allow you to remove the part.

Tuning options

Modifications to the steering wheel on this model usually involve installing a sports version, or installing a part from another model. The optimal option is considered to be a steering wheel from Kalina. But, if desired, you can select other spare parts. Here you need to look at the number and size of splines. If they match, then the steering wheel can be installed on the car. This can significantly improve the appearance of the interior.

conclusions

. As you can see, dismantling this unit is not difficult. But in order to do it without problems, you should clearly know how to remove the steering wheel on a VAZ 2110 and 2112. First of all, it is worth studying the possible complications that often occur. This way you can do this work yourself and in the shortest possible time.

How to remove the steering wheel on a VAZ 2110 with your own hands - step-by-step instructions

First, a few words about why you need to remove the steering wheel on a VAZ 2110? The reasons may be different, for example: re-upholstery of the steering wheel, repair or complete replacement of it due to a malfunction or unpresentable appearance. Removing the steering wheel on a “ten” is not difficult; all you need is a screwdriver, a 24mm socket, and a few minutes of free time.

We remove the steering wheel on a VAZ 2110 with our own hands - step-by-step instructions

1. First of all, you need to remove the decorative trim with the inscription “LADA”, under which the screws for securing the signal cover are hidden. It's best to do this with something flat, such as a small flat-head screwdriver.

2. Next, take a Phillips screwdriver and unscrew the steering signal cover.

3. Let's move on. The cover has been removed, now we have access to the steering wheel mounting nut, which must be unscrewed using a wrench and a 24mm socket. Before you start unscrewing, turn the steering wheel to the right until the steering wheel locks, this will make it easier to unscrew the nut.

4. After the nut is unscrewed, you can begin dismantling the VAZ 2110 steering wheel. Before removing the steering wheel, you need to align its position exactly in the center. To do this, set the steering wheel straight and, focusing on the factory mark, make your own mark on the steering column casing, this will simplify the subsequent installation of the steering wheel.

5. Disconnect the signal power supply and you can safely remove the steering wheel.

6. We grab the steering wheel with both hands and remove it from the splines. Sometimes the steering wheel sits very tightly, so you have to put a lot of effort into removing it. To speed up the removal process, apply light blows to the edges of the steering wheel, while simultaneously trying to pull the steering wheel towards you. Simply put, we turn the steering wheel towards ourselves.

7. The VAZ 2110 steering wheel has been removed. We carry out the necessary work and perform assembly in reverse order.

That's all for me, thank you for your attention and for visiting VAZ Repair. Until we meet again, take care of yourself and your VAZ. Bye.

Instructions

To begin, dismantle the cover, under which are located the screws holding the signal cover.
Then, using a Phillips screwdriver, you need to unscrew the steering signal cover.
The next step, after the cover is removed and access to the steering wheel mount is gained, is to unscrew the nut that directly holds it all in place. To do this, use a 24mm screwdriver and a wrench. But before you start unscrewing the nut, you should turn the steering wheel to the right until it locks. This will make it easier to do.
After the nut has been unscrewed, the steering wheel of the VAZ-2110 is dismantled. Before removing the steering wheel, its position must be set exactly in the center. To do this, you should set the steering wheel level, and then, guided by the factory mark, place yours on the steering column housing. You can, of course, do without marks, but thanks to them, the process of installing the steering wheel will become easier and faster.
Next, you need to disconnect the signal power wire, after which you can remove the steering wheel.
Taking the steering wheel with both hands, you need to remove it from the grooves (if it does not come off the first time, just apply a little force). To make the task easier, lightly hit the edges of the steering wheel and at the same time pull it towards you.

After the steering wheel is removed, the driver can carry out repairs or replacement. Assembly and installation proceed similarly in reverse order.

In conclusion, let’s say that, in essence, dismantling the steering wheel on a VAZ-2110 is not such a difficult task, which can be accomplished independently if you have the tools, knowledge and strictly follow the instructions in order to avoid complications that arise from negligence in the work.

Choosing a high-quality steering wheel for the VAZ 2110

Of course, every car comes with its own steering wheel from the factory. Cars of the VAZ 2110 series are no exception.

However, the appearance, level of comfort and tactile sensations sometimes leave much to be desired. The rim often wears out quickly, the surface becomes smooth, which interferes with normal control.

Factory solution

Dismantling and replacement

We have already decided on the reasons and available steering wheel options for the “ten”. Therefore, it’s time to get rid of the old device and install a new steering wheel in its place.

Disconnect the negative terminal from the battery . This way you can avoid a possible short circuit in the steering wheel wiring.
Check if your wheels are level. Place it as level as possible in order to simplify the reassembly process for yourself.
Unscrew the seven fasteners that hold the steering column housing in place, and then remove the steering column lower housing.
Unlock the column position adjustment lever.
Lower the column down.
Moving it gradually upward, remove the upper casing.
There is a decorative trim on the steering wheel. You need to pry it off with a flat screwdriver.
You will see two fasteners that hold the signal button.
Unscrew them and remove the button.

Use a socket wrench or socket to remove the retaining nut from the steering wheel. Do not unscrew it all the way, which will allow you to safely remove the element. It should be recalled that there is a hard landing here due to the associated qualities. If you completely remove the fasteners, you risk severely damaging yourself or the car itself with the steering wheel being removed.
Before removing the steering wheel, be sure to apply the appropriate marks. You need to mark the location of the steering wheel relative to the shaft and the turn signal switch.
Now apply several gentle but firm blows with your palm to the steering wheel in the direction away from the dashboard.
After this, the device will be able to come out of the slots.
Next, unscrew the fastening nut.

Reassembly

If you have selected a new steering element suitable for your VAZ 2110, there should be no problems with reassembly.

Otherwise, simply follow the dismantling instructions, working in reverse order. This will allow you to install the new element that you have chosen for yourself without any problems. To be more precise, for your car.

Step-by-step instruction

In order not to damage the integrity of the steering wheel of the VAZ-2110, including the Bogdan modification, dismantling should be carried out in stages:

First of all, you need to turn off the power to the car to prevent a short circuit. To do this, you need to disconnect the “negative” terminal from the battery, carrying out this activity slowly and carefully.
We turn the steering wheel until it takes a middle position relative to the wheels of the car.
Using keys of the appropriate size, unscrew the 7 fixing elements that hold the protective steering wheel cover.
The lever responsible for blocking the control is disconnected from the power supply, the column is lowered and the upper part of the protective casing is removed.
Using a screwdriver, which must be carefully inserted under the upper part of the decorative steering wheel trim, remove it and unscrew the two fasteners. The latter attach a button that produces a sound signal. The unscrewed button is carefully removed from the socket.
Using a socket of the appropriate size, you must carefully unscrew the steering wheel lock, and before starting the process, use a mark to fix the correct location of the steering wheel. It would not be amiss to note the correct position of the turn signals. It is important to dismantle the steering wheel with extreme caution, taking into account that when working, the part can cause injury, since the fit of the element is quite rigid.

To avoid injury, experts recommend not completely unscrewing the fixing nut, but waiting until the wheel comes off the main shaft, and then completely removing the fixing fasteners.

Replacing the steering wheel on a VAZ 2110, VAZ 2111, VAZ 2112

Welcome! Steering wheel - it is put on the steering shaft and thanks to it, the wheels are turned in the direction you need, but many car enthusiasts do not know all the important components of the steering wheel, firstly, your safety, at one time, very much depends on its choice It was fashionable to put sports steering wheels on a car, but there is no safety in them; in a frontal collision, even not a strong one, people hit their heads on the steering wheel, and therefore received concussions and similar injuries, and all because the sports the steering wheel consists mainly of metal particles that are not covered with any material, secondly, your driving depends very much on the steering wheel, take for example thin steering wheels (these were installed on the VAZ 2101), it is quite beautiful but not very practical, and take the steering wheel from a VAZ 2114, for example, it will be much more convenient for them to steer and it will not fly out of your hands during a sharp turn, so take the choice of a steering wheel very seriously and take all these nuances that we indicated a little higher into account when purchasing.

Note! To replace the steering wheel, you will need: Chalk or a marker that can be easily erased from the panel, you will also need an extension cord, sockets for it, a screwdriver with a flat and Phillips blade and an assistant; in addition to these tools, you may also need a drift from a soft metal, and a hammer!

Summary:

When should you change your steering wheel? The steering wheel is very rarely changed, only in the following cases it is affected: First, the steering wheel is not comfortable. Secondly, the replacement is carried out for safety reasons, for example, before this there was a sports steering wheel and its replacement is carried out with the original one or with some other one, without injury.

But there is another case in which the steering wheel needs to be replaced with a new one as quickly as possible, namely, the steering wheel breaks or bursts in some place, this happens extremely rarely, but don’t be surprised, this really happens; if the steering wheel is broken, we do not recommend using the car at all , or use it, but only very carefully, but when turning in any direction, the steering wheel in the place where it burst will make itself felt, since when turning there is a large load on it.