Isn't it time to get your own vehicle? You can start with the steering wheel, since the main interaction occurs with it. Do-it-yourself braiding on the steering wheel is a solvable and feasible task.
Using genuine leather for the steering wheel braid
Basically, leather braiding on the steering wheel is found in expensive cars. Does the make, age, and country of manufacture of your car matter much? And what is the reason not to install leather braiding? After all, this material is much more comfortable for the driver’s hands, and it also gives the car interior a more comfortable look.
This is more noticeable when traveling long distances. A distinctive feature of the leather steering wheel is high ventilation. If plastic does not absorb moisture, then this material copes with it perfectly. To increase the ventilation effect, perforated material should be used.
The disadvantage of leather steering wheel braid is its short service life compared to plastic. It is also difficult to remove contaminants. But these shortcomings are not an obstacle. The cost of services for installing leather braiding in salons is quite high; you should not blindly agree with it. The installation takes 2-3 hours, but you will have to fork out some money. But in reality the work is simple. All you have to do is start making a leather interior with your own hands!
The steering wheel braid can be ordered online, or purchased in stores that sell similar materials in finished form. There are plenty of models to choose from. The car owner can only use the needle and thread included in the kit. It will take no more than two hours of work to bring the braid into the desired shape. Leather is a fairly flexible material; after 3-4 days of use, it takes the shape of the steering wheel.
Material selection
Special automotive leather is best suited for steering wheel braiding. This material has many advantages over plastic:
- Firstly, the skin “breathes”, this allows moisture not to accumulate on the surface, and therefore the hand will not slip during long trips.
- Secondly, the leather steering wheel is pleasant to the touch, it will be more convenient and comfortable to hold.
- Thirdly, such a steering wheel will look presentable in the interior of any car.
The downside of the material is that it is more difficult to clean from dirt than plastic. In addition, the leather is not considered durable enough.
At this stage it is also important to decide on the color and texture of the material. As for the color, you can choose any one to suit your taste. You can also use several shades by inserting flaps around the circumference of the steering wheel. The texture of the leather can be glossy or textured, or a combination of both.
The braid can be purchased at an automotive store. There are universal and specialized options.
Leather braided steering wheel
There are situations when you can’t always find something ready-made.
For example, the multifunctional steering wheel of a car does not correspond to the products offered, or what is offered does not suit the client, this also happens. Maybe you should do the braiding yourself? If the latter option is closer, then it is worth preparing leather, needles, threads and scissors. Also, when doing this kind of work you will need a lot of patience.
How to make a steering wheel braid with your own hands
If possible, the steering wheel should be removed. This process is quite difficult; it is necessary to dismantle parts that pose obstacles. These may be adjustment buttons. The battery is switched off accordingly.
The stencil is an integral part of the sewing process. It's not difficult to do. To do this, the steering wheel is wrapped with cling film, onto which masking tape is glued. Next, a seam is drawn on it. Cutting is carried out along the contours made. Ideally you should get three pieces. A pattern is cut out from the stencil; five millimeters must be left for the seams. For greater tension of the material, at the joints the indents are reduced by two millimeters.
Selection of material for braiding on a car steering wheel
Leather with perforations is preferable, but leather without it is also great, but its quality must be of a high level. Pieces of leather are sewn together by machine. If you do not have this device, you can do this manually.
This is doable work, but quite hard. Therefore, you can contact the studio. The studio's specialists will sew a seam that will create more favorable conditions when tightening the leather braid on the steering wheel, since the holes for the hinges are already ready. When sewing, use synthetic threads. Synthetics are durable and last longer.
Preparing the steering wheel for braiding
To prepare the steering wheel before the braiding process, which you plan to do yourself, you need to:
Cover the steering wheel with cling film;
- Wrap it with tape;
- Draw a line with a marker where the braid will join. It is better to create this place on the inside of the steering wheel;
- Using a blade or sharp knife, cut the film along the line drawn by the marker;
- Remove the resulting option from the steering wheel;
- Make a pattern on thick paper. It is convenient to carry out this action using a cut film blank, which needs to be traced on paper;
- Cut out the paper version of the braid;
- Attach to the steering wheel. The workpiece should lie flat on the steering wheel, without overlaps or irregularities;
- If the workpiece fits the steering wheel perfectly, you can trace it on the leather. If the braid will be made from several pieces of leather, 0.5 cm must be added to the places where they will be stitched.
- Cut out the resulting product.
Leather steering wheel
Of course, the best option would be to reupholster the steering wheel with leather in a good salon, where a professional will do everything quickly and efficiently. The only question is how much it will cost, and if you consider that not everyone is ready to shell out a decent amount for “improving” the steering wheel of their car, then this option is far from the best. Therefore, we will try not to give specific advice, but will only limit ourselves to the list of “pros and cons” of each option.
Advantages of leather steering wheel wrap:
- Attractive appearance, the ability to completely renew the steering wheel;
- You can change the shape of the steering wheel and its configuration;
- High quality, ability to select color, type and tone of skin;
- Long service life.
Disadvantages of steering wheel reupholstery:
- High price. Often, reupholstery is 50%, or even 100% of the cost of the steering wheel; it is often cheaper to replace the steering wheel completely than to order a steering wheel reupholstery from a professional;
- Damage to the steering wheel. When reupholstering the steering wheel with leather, the surface of the steering wheel that remains under the skin is seriously damaged, so if it is necessary to remove such leather from the steering wheel, it will be unusable and will either have to be replaced or re-covered with leather. For example, many motorists value “Original”, that is, if the steering wheel or dashboard is not the same, then there is no desire to buy this car. I think you understand what I mean...
How to carry out the winding procedure yourself
In principle, this is not as difficult a task as it seems. There are no basic rules, but there are a few things that will help when applying tape to your handlebars.
The winding occurs from the edge to the center of the head tube. The specific place where the work is completed is determined by the owner based on the design of the steering wheel or until the cables appear.
The direction (clockwise or counterclockwise) does not really matter. The main thing is that at the end of winding the tape does not unwind or sag.
When wrapping, two hands are involved, so we advise you to fix the bike, otherwise it may simply collapse. Nearby, prepare scissors and two pieces of electrical tape to secure the edges of the braid. First, cut the tape, and then secure the edges to the handlebars of the bicycle.
The kit may include two short pieces for winding clamps or filling gaps.
An elastic material is chosen for the braiding to prevent folds or wrinkling. But which will not tear at the first stretch during the procedure.
Wrapping leather around a bicycle handlebar is quite difficult. The “foam with cork” winding is elastic, but less strong. Polyurethane is the best option in this regard. You can also use microfiber, as it is also durable, but harder to wrap.
The “single loop” braiding method is described above; there is also a “figure eight” method. Which will require more winding material.
DIY fur braid
Almost any type of steering wheel braid can be found on sale today. But not everyone is ready to stand in line with dozens of other car enthusiasts when choosing standard accessories for their car. Moreover, you can make a steering wheel cover with your own hands, giving it an original and stylish look literally in a matter of hours.
In winter, insulated steering wheel trim options become especially relevant. And here the leadership is firmly held by the fur braid - stylish, warm, soft, providing comfort for your hands, regardless of whether you spend most of the day driving or use the car occasionally.
Is it possible to make a fur case with your own hands? Of course you can - you just need to follow simple instructions.
- First, you need to decide on the choice of material - will it be practical sheepskin, short mink pile or fluffy arctic fox fur. The choice depends only on personal preferences. You can choose different colors and textures, or even sew a set from one material - covers for the steering wheel and car seats. Faux fur can also be considered as an option for braiding. But, nevertheless, a fur case made from natural materials has a much more attractive design. And it will be much easier to sew it.
- To make the braid, the steering wheel will have to be dismantled - this will allow you to take measurements and make further work with the material easier.
- The next stage is making a pattern. The braid must “sit” perfectly on the surface, which means measurements must be taken as carefully as possible. For this we will need the following materials:
- cling film;
- masking tape;
- stationery cardboard;
- marker;
- stationery knife.
- Carefully cover all surfaces of the steering wheel with cling film, ensuring that the elastic material adheres as tightly as possible to the surface. Then, on top of the film, you need to wrap masking tape on the steering wheel (you need to wrap the rim and the area of the base of the spokes). Next, along the surface of the wound tape, you need to outline the location of the pattern pieces - optimally if there are three or four of them. Otherwise, it will be difficult to sew together too small fragments without defects. The prepared pattern is cut along the contour using a stationery knife, divided into previously planned fragments and sent under the press.
- The prepared pattern templates are transferred to thick stationery cardboard - to do this, just circle them with a marker and cut them out, numbering their location in the overall pattern in advance.
- You can start cutting the material. To do this, it is better to fix the fur horizontally on a flat surface, with the pile down. Then, the pattern pieces are pinned to it with pins. And the parts are cut out - with an allowance of 3 - 5 mm, depending on the length of the pile. It is easiest to work with sheepskin - the fur braid in this case will not be too fluffy and quite universal.
- The prepared pattern parts must be sewn together. It is better to do this on a sewing machine - this way the seam will be stronger. But, as a last resort, you can get by with manual labor. It is better to process the cut edges of the fur with a zig-zag seam or hem it with an overlocker - this will prevent the fur from “shedding” along the edge, which is especially important for artificial materials.
- The finished cover can be tried on the steering wheel and prepared for fixation.
- The cover must be fixed using strong nylon threads and two hardened sewing needles, as if lacing it on the surface of the steering wheel. It is better to protect your fingers with thimbles. In the area of the locking thread attachment points, it is better to additionally treat it with instant adhesives. Otherwise, during operation of the steering wheel, they may come undone.
The fully finished braid should fit tightly around the surface of the steering wheel. Make sure of this before completing work. Only after this will the steering wheel be able to be installed in place - with a new fur trim, which will certainly prove useful in the coming winter.
LiveInternetLiveInternet
DIY leather steering wheel braid
DIY steering wheel braid. March 22, 2013. . Prepare your car leather. It is not recommended to use the leather from which clothing is made, as it will quickly lose its appearance and “wipe out”. How to choose the right braid for the steering wheel? How to make a three-dimensional pattern on the skin (pressure). Upholstering the steering wheel has become even easier. DIY leather steering wheel. Making a pattern for a car steering wheel Revestimento de volante em couro.. How to make and weave a braid for the steering wheel of your car step by step with your own hands from a dropper? The steering wheel braid will require a lot of droppers, the wire is thinner, of course, and about 60 meters of it is needed. Car owners often do everything on their own, because wrapping the steering wheel with leather with your own hands is a completely doable task even at home. To ensure that the seams at the junction of the pieces do not stick out against the general background and that the surface of the steering wheel braid is smooth everywhere, it is recommended... It is important that when putting it on the steering wheel, the folds are not too large, since they will not be able to stretch during use and can greatly deform the entire coating when straight. How to update a leather steering wheel with your own hands and care for the leather braid. 243.
Premium steering wheel braid
Do-it-yourself braiding on the steering wheel will help minimize the risks from inconvenient operation of the steering wheel. A leather steering wheel can be easily wiped with an antiseptic solution before driving. Do-it-yourself steering wheel braid. It should be noted that universal braids are not suitable for every car model. In this case, you need to prepare scissors, a needle, thread and a piece of high-quality leather. Therefore, the best way in this case is to reupholster the steering wheel with leather yourself, which will save money and add individuality. When transferring each sector of the steering wheel layout directly to the leather from which the braid will be made, you need to take into account the margin... Non-standard use of used aerosol cans. (do-it-yourself spray gun) - Duration: 11:00 shlepanovan 542. Leather braid on the car steering wheel, real leather! — Duration: 8:42 CHINA .PRODUCTION 62 .. Steering wheel braid made of genuine leather - advantages. 1. During the entire trip, the driver’s hands hold the steering wheel, which should under no circumstances slip. How to choose a braid for the steering wheel and not fly through? There is a huge variety of leather braids on the modern market. The disadvantage of leather steering wheel braids is its short service life, compared to plastic. DIY leather braid on the steering wheel. There are situations when you can’t always find something ready-made.
5 reasons to reupholster your steering wheel with “Leather Rules!” 1. The braid is made from 100% genuine leather. Savings! By installing the braid yourself, you save from 3,000 rubles. from the price at the auto shop. Leather steering wheel braid with laces: you can do everything yourself, without turning to specialists. The main thing is to have everything you need at hand. And since it is made of leather, and leather stretches very well, everything should work out... Leather braiding on a genuine leather steering wheel in 30 minutes! DIY spiral braid for wires. A new way to use rope made from plastic bottles... How to reupholster a steering wheel with leather with your own hands. To add comfort to driving, many motorists buy special covers for the steering wheel. 2 Pattern of leather for covering the steering wheel. 3 We make a cover. 4 Re-upholstering the steering wheel in the video... Leather, unlike plastic, breathes, which ultimately affects the comfort of holding the steering wheel during long trips, when your hands sweat. The second option to get the long-awaited leather-covered steering wheel is to purchase a specialized leather braid for the steering wheel. Braiding a car steering wheel with your own hands is a simple process, but it requires accuracy and patience. In this article, the author will tell you how to make a simple braid without the process of stitching the leather on the steering wheel, which is difficult for many.. Covering the steering wheel with genuine leather. The braid on the steering wheel is another Chinese “fake”)). How to choose a braid and put it on the steering wheel? DIY leather braid for the steering wheel (2 series).. ► Making a pattern for the steering wheel of a car Revestimento de volante em couro. Vladimir Mazur. ► DIY leather braid for the steering wheel (1 series). ► Leather braiding on a genuine leather steering wheel in 30 minutes! art baykeev.. How to choose the right braid for the steering wheel? STEERING BRAID Chinese method. DIY leather steering wheel. Marco steering wheel braids. Reupholstering the Steering Wheel with Leather.. But if there is a desire for originality, a desire to somehow especially decorate the car, then braiding the steering wheel with your own hands is what you need. Leather braid. Of course, it is better to take genuine leather.
Steering wheel braid for Skoda Octavia A5
1. Do-it-yourself leather steering wheel braid.
First you need to measure the diameter of the steering wheel and its thickness. Choose any of them and first try it on a braid without a handlebar and without tightening the cord. Then stretch the braid over the steering wheel, placing the joining seams symmetrically.. A leather steering wheel, or rather a leather-covered steering wheel, as a rule, refers to cars with additional options, in fact, it is one of them. This steering wheel is installed on more expensive car configurations. A leather steering wheel has its advantages and disadvantages.. Hyundai Solaris Hatchback Style+Safety › Logbook › Do-it-yourself steering wheel heating. You can find different colors of thread/leather (for example, as-inter.ru - I bought from them covers for the door armrests and a braid for the manual transmission handle - everything was of high quality and on time).. Results for the request: Do-it-yourself leather braid for the steering wheel. Images may vary slightly. Braiding a car steering wheel with your own hands is a simple process, but requires care and... How to install a leather braid on the steering wheel of your car with your own hands? The braid is really made of genuine leather, pleasant to the touch. The kit included: two needles, a cord (black synthetic thread), a leather braid, double-sided tape, and a plastic spatula. Tags: Jetta 5 steering wheel braid, UAZ 469 steering wheel braid, premium steering wheel braid, Skoda Octavia A5 steering wheel braid, Toyota Avensis steering wheel braid, lace-up steering wheel braid buy.
Braid
When choosing a new braid, you need to pay attention to the quality of the product. Good products will not have the strong smell of old rubber.
The foam filler increases the volume of the steering wheel rim, but has elasticity. The driver's hands get tired faster, making efforts to overcome it.
It is better to choose a sponge as a filler. It retains the shape obtained by squeezing by hand. The palms do not get tired after a long ride. In winter, the sponge does not overcool, and in summer it does not heat up to a hot state. However, the sponge is not strong enough. Covers have to be changed frequently.
There are braids with massage pads on the rim. They relieve stress from the palms, but over time they can create discomfort.
Comfortable gel-based braids create volume, but become stiff in the winter cold.
The suede braid is pleasant to the driver's hands, but is not durable and abrasions appear.
Steering wheel covers made of fur, plush and other “fluffy” materials require frequent replacement.
The braid on the steering wheel is put on like this:
- Lock the steering wheel;
- attach the braid to the steering wheel so that the seam is bottom center;
- put it on the steering wheel, pulling it symmetrically on both sides;
- pull it tightly onto the steering wheel;
- Align the braid cut exactly with the center of the inside of the rim.
