VAZ 2114 PAINTING stamps in SWAMP color / speedometer WORKING

Wheels for VAZ 2114

Wheels act as a functional and decorative addition to the vehicle, so it is important to carefully consider the choice of purchasing such a multifunctional option. There are a lot of disk models available, so the choice requires careful consideration.

There are standard and non-standard models, so a detailed examination of the technical parameters allows you to determine what is suitable for installation on a particular car.

Decoding indicators on disk

It will be easier to select car wheels when the decoding of the provided indexes is known, and therefore special care is required to consider the details in this matter. It is imperative to remember that each designation is placed for a reason and has its own information load.

For example, 175/70 R13 is considered a standard option, so it needs to be considered in particular detail. This means that the diameter of the tire is 13 inches, the profile height in percentage is 70, and the width in millimeters is 175. This allows you to figure out in detail whether the tire is suitable for fitting a car. Based on this, a disk is selected that fits perfectly into the geometric proportions.

Standard and non-standard disk models

The standard wheel model for the VAZ 2114 is considered to be 13 radius, since this ensures attractiveness and a harmonious combination with the tire parameters, which is considered an important advantage. But recently, more and more often on city streets, such a car is found with 15 rims, since this emphasizes the “aggressiveness” and a certain audacity of the car. If you want to choose such non-standard “sneakers”, it is important to consider the following recommendations.

Among the non-standard models, we can also note the R17 wheels, which have a non-standard shape and are not suitable for everyone. Here it is important to note the technical and design parameters in order to avoid inconvenience during use. If you follow the opinion of experts, then in this case it is recommended to pay attention to the risk of the disk “popping out” and damaging the tire, so special care is required when considering the balance between attractiveness and safety.

In order for the wheels to be attractive and of high quality, it is important to purchase only from special stores selling automotive products, since this is the only way to guarantee quality, reliability and durability. It is also important to remember that disks cannot be very cheap, since, given the complexity of the manufacturing technology, the final cost is rapidly increasing.

Installation

When installing disks of a new design, special attention is paid to the amount of offset. The symbol for this value shows the distance from the contact plane of the wheel to the conventional line of the middle of the rim. It is written as “ET” and measured in millimeters. The optimal departure is ET36

. Naturally, the PCD, that is, the diameter of the circle on which the disk mounting holes are located, must meet factory requirements.

On VAZ 2113 -15 this value is usually 98 mm. In the accompanying documentation this is written as PCD = 4x98 mm

.

Optimal rim width ratio

:

• 175/65R14 – wheel width 5.5J;
• 185/60R14 – wheel width 6J;
• 185/60R14 – wheel width 6J;
• 185/55R15 – wheel width 6J;
• 195/60R1 – wheel width 6.5J.

You can replace the disks yourself

. For domestic car owners this is not a problem. However, one should not rely on ingenuity and resourcefulness if there is no experience. The brake and disc systems of any car do not tolerate amateurs, since the safety of the driver, passengers and other drivers is at stake.

It is better to periodically diagnose brakes using good equipment. And you can perform routine maintenance on replacing pads yourself. Moreover, you won’t have to do this often.

Discs last at least 40,000 km

. But taking good care of your own car can extend this period to 100,000 km. The size of wheels on a VAZ 2114 and their type, as you understand, is a purely personal matter, if the choice does not contradict the characteristics specified by the automaker. Therefore, take this into account when visiting an auto store.

Most Russian drivers are well acquainted with the “legendary nine”. AvtoVAZ produced this car for about 10 years. After appearing on the market, it quickly became the most popular in Russia. After the restoration of the VAZ 2109, car enthusiasts saw the new VAZ 2114 Lada (LADA).

The design is distinguished by its simplicity and high reliability. In addition, its shape and design features allow for tuning, changing its appearance, modernizing the body, and improving the interior.

Of course, such work requires large financial costs. However, there is one item that does not require a lot of money, but gives a good visual result. We are talking about replacing wheel rims.

Classification of disks by manufacturing method

Wheels for VAZ 2114 cars can be manufactured using different technologies, so before purchasing it is important to consider all the options available:

• Stamped. This is the most common option, which combines various technical and practical features. Low cost combined with high quality are the main advantages that made the products popular in the automotive market for the VAZ 2114.

Among the advantages of stamped discs, we can highlight such qualities that have become the basis for the development of wide consumer interest: due to their softness, such discs are smoothly deformed, so the driver will not encounter unexpected cracking of the disc while driving; Considering that the discs do not burst, but bend, they can be easily restored.

• Cast. You can even more often find cars on die-cast ones, since they are the personification of durability, reliability, quality and attractiveness. But you will have to spend a lot of money on such a model, since, taking into account the peculiarities of the technological process, the cost increases significantly.

The high cost makes such wheels not affordable for every buyer, but you can count on the following positive aspects: low weight, which makes the car easier to drive;

fuel consumption is slightly reduced; there is a large assortment of shapes to choose the most attractive option; The integrity of the tire is preserved, as it is protected from negative external influences.

• Forged. Such discs are created by mechanical forging, so they have a solid structure. As a rule, these are white models with characteristic stylistic features.

Photos and technical characteristics of each option are an opportunity to choose the most attractive and high-quality type for equipping your vehicle.

Casting

They are distinguished by a wide variety of shapes and patterns. The main advantages include:

• light weight;
• reduction of fuel consumption and load on the chassis of the car;
• operational cooling of the brake system.

But there are also significant disadvantages. When subjected to a strong impact, discs split, which can lead to terrible accidents, especially when driving at high speeds. After some time of intensive use, the side elements of the structure begin to oxidize, which requires special care and attention from the owner.

Casting for a VAZ 2114 costs an order of magnitude more than its steel counterparts.

Tips for choosing disks

Wheels will perfectly highlight the advantages of a car's appearance only if you choose them correctly among the entire existing range of options. Experts recommend taking into account the following parameters, which became the basis for choosing the highest quality, reliable and attractive option, since the supply market is really saturated with various modifications:

• Size is the main parameter for choosing the right disks. At the moment, R13-R16 wheels are considered the most popular for the VAZ 2114, but some craftsmen manage to accommodate R17, but, as practice shows, this is a risky option, because at high speed they can pop out due to the fact that the product does not correspond to the geometric tire properties.
• Width, height, offset, centering hole and bolt pattern are other important parameters that are important to consider when choosing. And here you need to take into account the following average parameters that are most suitable for equipping the tires of a VAZ 2114 car:
• If R13 and R14 are used, then in this case the parameter indicators should be as follows: 4X98 - these are the disk drilling indicators, the width is 5.0 and 5.5 J, respectively, depending on the radius, and the offset varies ET 37-40, in depending on the modification. The hub diameter is considered uniform and is 58.5 mm.
• When using non-standard options, you need to carefully consider the design parameters, namely the CO, the width of the disk, its drilling and overhang. In addition, the tire plays an important role.
• Car wheels for the VAZ 2114 can be different in terms of style, so it is important to choose the right option that matches the appearance of the car.
• Another important parameter is that discs can be of different types in terms of production, which is why special care is required in their selection. Namely, these can be stamped, cast and forged models.

Wheels for the VAZ 2114 are an important decorative and technical addition, so special care is required when choosing. A wide range of modifications allows even the most complex preferences of the motorist to be realized, which is considered an important achievement of the production process.

Syverlovka and bolt pattern of VAZ wheels

Wheel bolt pattern on VAZ 2107

The design of the seven involves drilling 4x98 wheels, where the number 4 indicates the number of bolts, and 98 indicates the diameter of the holes on the disc structure.

Many foreign cars use a bolt pattern with similar parameters – 4×100. In the first situation, the distance between the centering bolts is 69.3 mm, and in the second case - 70.7 mm. The error is 1.4 mm and does not allow for tight fixation of a non-standard disc.

In addition, installing a car disk with non-standard parameters can lead to deformation of elements, namely mounting holes and bolts.

There are other methods for attaching 100x4 rims to the seven. For example, you can use extended bolts, adapter rings, studs and eccentrics. However, these parts can ultimately complicate or impair the mounting of the wheel product.

Therefore, it is recommended to install standard car wheels and tires so as not to lead to wheel imbalance and vibration while driving.

Wheels on the VAZ 2107 are equipped with 13-inch stamped wheels or analogues with identical parameters. Tires have dimensions 175/70/R13.

The nominal pressure in “seven” tires directly depends on the tire sizes:

175/70/R13 – 1.9 rear, 1.6 front wheels;

165/80/R13 – 2.0 rear, 1.7 front.

Wheel bolt pattern on model 2106

For a six, the wheel bolt pattern is 4×98. As for the factory dimensions of the disks, then:

• standard width is 5.0J,
• centering hole 58.5 mm,
• departure ET

Tire size for the six is ​​175/70/R13.

As a restyling, you can install wheels 185/60/14, 195/50/R15.

Drilling on the VAZ 2109 model

The VAZ 2109, “nine”, has factory settings for the wheel bolt pattern of 4×98. The factory equipment was equipped with 175/70/R13 tires and 13-inch wheels.

Wheel bolt pattern on VAZ 2110

The tenth VAZ model is equipped with factory stamped 13-inch wheels and 175/70/R13 tires. There were also dozens of configurations with 14-inch casting and 175/65/R14 tires.

As for the dimensions of VAZ factory wheels, the width is 5.0-5.5J, drilling is 4×98, as on other models, the centering hole is 58.5 mm and the offset is ET 37-40.

Drilling on 2111

The Lada station wagon 2111 was equipped with 13 or 14-inch wheels from the factory, depending on the vehicle's configuration. Both options could be used.

Tire sizes: 175/70/R13, 175/65/R14, rims: width 5.0J, drilling 4×98, centering hole 58.6 mm, offset ET40.

Drilling on the VAZ 2114 model

Lada Samara 2113, 2114 cars were equipped with factory stamps with a 4x98 drill bit.

As for the rims, the offset was ET40, width 5.0 J and centering hole 58.5 mm. Wheels 175/70/R13.

Drilling on the VAZ 2115 model

The fifteenth model Lada 2115 is equipped with factory stampings with dimensions of 13 and 14 inches, and a 4 × 98 drill.

As a restyling option, you can use car tires:

Drilling on the VAZ 2121 model

The first Russian SUV Niva from VAZ or Lada 4x4 is equipped with 16-inch steel factory wheels and tires with sizes 175/80/R16 and 185/75/R16.

Disc dimensions: offset ET40, drilling 5x139.7, centering hole 98.6 mm and width 6.5J.

Wheel bolt pattern on a Niva Chevrolet car

The Russian Niva Chevrolet SUV is equipped with factory-made 15- and 16-inch rims with drilling parameters of 5×139.7, offset ET40-48, centering 98.6 mm and width 6-6.5J.

The diameter of the VAZ 2114 1.5i rim is 13″ (330 mm), width is 5″ (127 mm).

Common parameters:

VAZ 2114 is equipped with wheels with a diameter from 13″ (330 mm) to 14″ (356 mm), rim width varies from 5″ (127 mm) to 6″ (152 mm). The wheel for this brand has 4 holes for fastening (bolt M12x1.25).

Standard wheel sizes for VAZ 2114:

Wheel sizes for VAZ 2114 2001 1.5i:

• Diameter 13″ (330 mm), width 5″ (127 mm), projection 1.4″ (35 mm), PCD 4x98 (mm).

Wheel sizes for VAZ 2114 1.6i 16V:

• Diameter 14″ (356 mm), width 6″ (152 mm), projection 1.4″ (35 mm), PCD 4x98 (mm).

Important: the diameter of the mounting holes for the VAZ 2114 is always 98 (mm), the standard disc offset is 35 (mm).

Other names:

Other designations for the VAZ 2114 hatchback on the Russian market: VAZ 2108, VAZ 2109, VAZ 2113, Lada Samara.

Years of production Years of production of all modifications of the model: 2001-2013.

The distance between the vertical plane of symmetry of the wheel and the plane of application of the disk to the hub.

Measured in millimeters (mm)

1. D - disc diameter in inches.

2. x - a sign indicating the inseparability of the disk.

3. B is the width of the rim in inches.

The distance between the vertical plane of symmetry of the wheel and the plane of application of the disk to the hub.

1. Number of bolt holes.

2. The diameter of the circle on which the mounting holes are located.

1. Width of the working surface.

2. Percentage of profile height from width.

3. R ​​- design type (radial) - internal diameter (in inches).

The diameter of the central hole, another marking is CO.

Disclaimer: Although the data represents official manufacturer figures, the information above is for reference only and is not guaranteed to be completely accurate.

It is important for every car enthusiast who selects new wheels for his car to remember what type of bolt pattern is on the VAZ 2114. This, at first glance, is not the most important parameter, but in fact is decisive not only from the point of view of correct installation of the wheel disk, but also from a road safety point of view. Today we’ll talk about what is hidden under the term “blabbermouth” and how to correctly define it.

Let's find out which VAZ 2114 wheels are best to install?

When asked which VAZ 2114 wheels are needed, there are no ambiguous answers. However, there is always a choice! This applies to quality, price, and even what their radius should be. Therefore, having decided on a replacement, you should not immediately go to the store for a model similar to the factory version. The situation needs to be carefully studied. And it is possible that soon it will be possible to find a more worthy option that can last an order of magnitude longer.

In the modern auto industry there are a huge number of worthy wheels. The task of any driver is, after a short discussion and consultation with a specialist, to choose the best ones for your car.

What options are there?

In order to select the right wheels for a VAZ 2115, a certain amount of attention and skill will be required. It is important that all components fit perfectly together. Then the likelihood that the selected model will last a long time automatically increases.

Conventionally, all types of disks can be divided into several categories:

The first of them are included in the basic package and have excellent technical characteristics. Steel wheels are inexpensive, but nevertheless reliable and durable. They can be chosen by a driver who values ​​comfort and ride quality, but does not accept any excesses.

In turn, alloy wheels on the VAZ 2114 are made of light alloy materials that contain aluminum. Externally, they noticeably outperform factory equivalents, without losing in technical terms. The only disadvantage of alloy wheels is their price, which differs from steel wheels by more than two times. However, a good quality characteristic will more than justify the financial costs.

Forged wheels are classified as exclusive with excellent technical characteristics. For forging, aluminum alloys are used, which are first exposed to a press. After the configuration of the part is formed, high-precision metal-cutting machines bring it to the required shape.

The hardness of such discs is approximately 2.5 times higher than normal! That is why it is more advisable to install them on a racing car, and not on those that move around the city. Forged wheels look very stylish, but is their high price justified in ordinary use?

Of course, the right to choose the tire size, their appearance, etc. is entirely provided to the driver. In this matter, it would be useful to listen to a specialist who will select the best option based on the conditions in which the car will be operated.

Alloy wheels

Casting is fashionable, cool, modern. In addition, such disks can be 20-30% lighter than stamped ones, because they are made from a light metal alloy, they are less susceptible to corrosion and are more durable. The low-pressure casting technology itself increases the strength of products.

Externally, alloy wheels have an individual look; there are design bureaus that produce new shapes and follow fashion.

Functionally, the ride on alloy wheels is smoother, acceleration is improved, and fuel consumption is lower.

But there is also a “other side of the coin”. The disadvantage of alloy wheels is the continuation of their advantages. That is, when it gets into a hole, a cast disk does not crumple like a stamped one. But under supercritical load it simply bursts, splits - and its place is in an alloy processing workshop, or in the trash.

What do you need to know about installation?

The optimal radius, corresponding to the technical characteristics of the car and allowing it not to lose speed, is supplied under the code R14. In the factory format these may be R13 wheels, but drivers are not too fond of them.

Once the purchase has been made, you can begin installation. This can be done either independently or with the help of employees of any service station.

It should be noted that this process does not carry any pitfalls, so you can try to install the disks on your own. This process is completely identical for 2114, 2115 and many other models. If the work is being done for the first time, or the driver does not have sufficient skills, it is imperative to enlist the support of a professional! The safety of not only the driver himself, but also other road users depends on what tires are used and whether the wheels are installed correctly.

During the work process, it is important to consider that the tires must perfectly match the size of the wheel!

Otherwise, when turning the wheel on the VAZ, the tire will touch the suspension or wheel arch liners.

The car owner definitely doesn’t need this! In addition, the selected tires must be of high quality in order to cover the 40,000 km declared by the manufacturer with the disc. If there is an urgent need, you can choose cheaper tires for the summer. With careful driving, it can last quite a long time and will not make the owner doubt the correctness of his choice. However, summer quickly passes, and the tires will have to be changed again.

In order not to purchase several sets at once, you can choose the all-season option.

Tuning VAZ 2109

Let's face it, the standard VAZ 2109 wheels with dimensions of 175/70 R13 do not look particularly impressive visually. It's all about the high profile of the rubber with a visually small diameter of the disc itself. Therefore, car enthusiasts often have a question: is it possible to install wheels of a larger diameter, 14 or even 15 inches, on a VAZ 2109 without compromising the car’s performance and passing the next technical inspection? You will find the answer to this question by reading this article.

Is it possible to install R14 or R15 wheels on a VAZ 2109

So, you can install R14 wheels on VAZ 2109, 2108, 21099, 2114, 2115. The disk parameters should be 5, 5.5 or 6 inches wide and have an offset of 35-40 mm. You can also install cast or forged wheels with the same parameters. Other parameters of the disks: holes 4x98 mm, central hole diameter at least 58.5 mm.

In this case, it will be necessary to select tires of the appropriate size so that the overall diameter of the wheel remains approximately the same. Otherwise, when turning the wheel, the tire will touch the wheel arch liners or suspension elements, which, of course, is not what we want.

Standard wheel sizes VAZ 2114 1.5i 2114x

The VAZ 2114 1.5i 2114x model was produced from 2001 to 2013. Table of standard and suitable wheel sizes for VAZ 2114 1.5i 2114x.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

How to make the necessary calculations

Acceptable tire sizes for 14-inch wheels: 175/65 R14 and 185/60 R14. Moreover, the second option is preferable.

However, the diameter of the wheel can be calculated very simply if you know how the characteristics of the rubber are deciphered. Let's do this for the VAZ 2109.

Let's take a standard 175/70 R13 wheel. 175 – tire width in millimeters; 70 – height of the rubber profile as a percentage of the width, that is, in our case 175 x 0.70 = 122.5 mm

Disc diameter 13 inches = 13 x 25.4 = 330 mm.

The total wheel diameter is the sum of the rim diameter and two profile heights. Total 330 + 122.5 x 2 = 575 mm.

Having made calculations in a similar way, we get the following figures for comparison:

• 175/70 R13 – 575 mm;
• 175/65 R14 – 583 mm;
• 185/60 R14 – 577 mm.

We see that the last option is the most suitable. It is also 10 mm wider, which will provide us with a shorter braking distance due to the increased contact patch with the road, better handling, and resistance to tire bending in corners at high speeds due to the reduced profile height. But at the same time, a wide tire is more prone to hydroplaning at high speeds than a tire with the same parameters, but narrower. Also, impacts from driving through road potholes will be more strongly transmitted to the body of a car with wheels of low profile height.

Table for selecting suitable wheels

To confirm your words, data on permissible wheel rim sizes can be found in the factory instruction manual.

Wheels with a larger radius, for example with a diameter of 15 inches, are also suitable for the Samara, but they are not recommended by the factory, so there may be problems with passing the technical inspection. For such wheels, you should choose tires with a dimension of 185/55 R15. With a stretch, 195/50 R15 will also work, but it’s better to play it safe and try it on if your friends have similar ones. In this case, the wheel may “rub” due to the tire being too wide.

Acceptable sizes of tires and wheels for the VAZ 2109 Lada Samara

Photos 14 and 15 of rollers on the nine (on stamps, slicks, cast)

Video: How 15th wheels look on Samara

What size rims and tires do you use on your VAZ 2109? Describe in the comments your experience with tires and wheels of non-standard sizes, or take part in the survey!

Selection rules

To choose the right discs, you need to take into account a number of important parameters. Most representatives of the Russian and foreign automobile industry are offered with 13-16-inch wheels; the fourteenth Lada model is included in this list of vehicles. Size is one of the main factors.

Today, many car enthusiasts choose low-profile tires, which improve car handling. In this regard, many VAZ 2114 owners are moving away from the standards and replacing 13th wheels with 14th and 15th ones. The latter option is advisable when tuning a car for sports, as in this case a special braking system is used that does not fit standard wheels. In other conditions, this means increased costs for fuel and repairs to the running gear of the “iron horse.”

You can also find out which wheels are suitable for the fourteenth model from the employees of the Avtovintik store, who will provide qualified assistance in the selection and give practical advice on the care and selection of tires.

All necessary parameters can be found in the vehicle operating instructions.

If you do not follow the recommendations, this may negatively affect:

• control;
• maneuverability;
• security;
• fuel consumption;
• braking;
• suspension condition.

In order not to risk your own safety and the lives and health of other road users, you need to take the choice of wheels seriously; this will help you avoid many troubles later.

Our store offers a wide range of designs of different configurations and types. Each buyer will be able to choose wheels to suit their taste. The average service life of conventional rollers is 40,000 km. mileage If the operation takes place under gentle conditions, then the discs can last even 100,000 kilometers.

What kind of drilling is on the VAZ-2114

One of the main parameters that you should pay attention to when replacing standard disks on a VAZ-2114 car is the dimensions, location and diameters of the mounting holes, PCD, pitch circle diameter, or, in simple terms, drilling or bolt pattern.

Bolt pattern on a VAZ-2114 wheel

Bolt pattern - this characteristic is expressed in two numbers and indicates the distance between the centers of the mounting holes and their number.

Drilling for all VAZ cars (except Oka and Niva) - 4x98 , four holes, the centers of which are located at a distance of 98 mm from each other .

However, this is a simplified designation for the user. The disc manufacturer is required to take into account both the diameter of the holes, their number, the distance between their centers, and the diameter along which the centers of the holes are located . Such a designation would complicate the selection of disks by the user, so knowing drilling in the “number of holes/distance between them” format is considered sufficient.

A few more wheel parameters

The drill bit can be measured using the spare wheel. In all SAMARA drilling 4*98

There are several more parameters that relate to the original VAZ-2114 rims - the width of the stock rim is 5.0J , the offset of the ET45 , the diameter of the centering hole at the hub is 58.5 .

Varieties

As for the dimensions, the emphasis should be on the diameter of the hub (58.5 millimeters) and its width (5-6.5 inches). For fastening, standard M12 bolts are used, the thread pitch of which is 1.25 millimeters.

As with most other cars, the VAZ 2114 is offered on the market:

• Steel (stamped);
• Light alloy (divided into forged and cast).

Stamped

Steel wheels are very common. Not surprising, because all “fourteenth” models are equipped as standard with exactly these types of “rollers”. However, they are popular not only because of this. These wheels are cheap, but at the same time reliable and durable.

When impacted, they do not shatter into pieces, unlike some other disc materials. They just get deformed. Such deformations are sometimes removed manually, although the best option is to use special equipment.

But they also have disadvantages, including:

• Large mass, which negatively affects control, fuel consumption and tire wear;
• Weight also affects the chassis and transmission;
• Steel ones extremely rarely have an attractive appearance, which is one of the main reasons for replacing them with analogues.