LED lamps for lensed headlights H11 Round Light 12 CSP set - 2 pcs.

Car manufacturers always install high-quality lamps on new cars. And H11 lamps are one of the most popular types. These are single-beam lamps that are designed for use in low and high beam light sources, as well as fog lights, for different types of vehicles.

Like any other type of lamp, they will burn out when they reach the end of their "life". Before purchasing, you need to make sure that you choose the best H11 halogen bulbs from a variety of options to ensure good visibility.

However, the h11 car bulbs that make it into our ratings and buying guide below are a good starting point for finding high quality replacement bulbs.

Types of lamps

To make the correct selection of a device for transport, you should take into account the parameters of the car - the maximum permissible power, the shape and size of the base. The most popular at the moment are xenon, incandescent, and halogen lamps.

• Incandescent lamps. It is a transparent spherical flask with a spiral of tungsten wire placed inside, while all the air is pumped out of the flask. A filament temperature of 2 thousand degrees on the Kelvin scale, with a yellow tint, is considered weak. The characteristic is significantly less than natural sunlight.
• Halogen. Inside the flask of the device there is no longer a vacuum, but an inert gas, which includes halogen vapor. This design feature led to the emergence of a self-cleaning process. The color temperature of this type is higher - 2700-3000 Kelvin, which ensures better light perception by the eye.
• Xenon. The bulb of this type of device is filled with xenon, and when electricity is supplied, an arc appears between the electrodes, creating a light beam. These devices have a high color temperature. Various models are available that provide their own shade of light. Thus, an 8 thousand Kelvin lamp provides a light beam with a blue tint, and in devices with 5000-7000 Kelvin, this beam is close in shade to that of the sun.

22W LED HEADLIGHT KIT

22W LED HEADLIGHT KIT

This set includes two H11 bulbs that can be installed as main bulbs in any car. Super bright CREE LEDs of the MC-E family are used in production. The temperature of the emitted light is 4300 K, which corresponds to pure white light without yellowness. Each lamp provides a light beam with a power of 1200 lm; for its operation, a power source of 12 - 14 V is required, the power is 22 W. To solve the problem of overheating during operation, a metal heat sink is used.

Testing has shown that these lamps can be used as main lamps at night. The results are in no way inferior to halogen lamps. The light spot is wide and bright, the illumination range is up to 75 meters. The level of roadside illumination is somewhat inferior to previously tested samples - but this deficiency can be corrected by adjusting the reflectors. Significant disadvantages include high cost. It is also undesirable to use them as fog lights or in rainy weather; a bright white light will create a solid white wall in front of the driver due to the effect of refraction and reflection in drops of moisture.

Rating TOP 5 best H11 lamps for cars

The ranking of the best models included:

• PHILIPS H11 LongLife EcoVision.
• KOITO H11 Whitebeam 4000K.
• X-treme Vision +150%.
• OSRAM NIGHT BREAKER UNLIMITED.
• MTF light Vanadium 5000K.

Let's consider each model separately.

PHILIPS H11 LongLife EcoVision

The flask is resistant to vibration and temperature, this completely eliminates the possibility of an explosion, thanks to quartz glass, which is highly durable. The low power of the device ensures that there is no load on various components of the car and the generator, ensuring its correct operation. The color temperature of the accessory is 3100 Kelvin. It is of high quality along with the above characteristics.

Price: from 525 to 750 rubles.

• service life (2,000 hours);
• The presence of blister packaging prevents damage to the device;
• from a well-known manufacturer (Philips).

• none.

A good device, used to replace low beams on a Nissan X-Trail, the old one lasted 70,000 km, and confirms the manufacturer’s promise of a long service life of the device. I hope this one will last no less, it’s better to take one than a cheap one, which will burn out much faster.

KOITO H11 Whitebeam 4000K

The glow temperature of an incandescent filament made of a material with increased refractoriness is higher than in standard halogen devices. A mixture of inert gases specially pumped into a flask under pressure twice that of a conventional lamp. Durability meets vehicle manufacturer specifications and will last 25-100% longer than similar products from other manufacturers.

Price: from 2,399 to 2,529 rubles.

• Well illuminates the area of ​​the near and far side of the road (15.9 lm);
• does not blind the driver ahead (0.61 lm);
• 1 year warranty.

• low impact in rain and fog;
• After checking the cut-off line, both headlights needed to be adjusted (models for left-hand drive vehicles).

The lamps are truly premium quality - this can be seen from the packaging, the quality of workmanship, and the luminous flux. They provide excellent illumination of both the road surface and the side of the road. In addition, these have excellent geometry - they do not blind oncoming drivers, which is undoubtedly important. I've been using a couple of these models for over 5 years now. I recommend to buy!

X-treme Vision +150%

The light beam is up to 40 meters longer compared to standard halogen lamps. Thanks to this, road signs and obstacles are much more visible, and the driver has more time to react to the situation. In addition to this factor, the model has an ideal price-performance ratio.

Price: from 608 to 680 rubles.

• visibility is up to 150% better;
• D1S, D2S, D2R, D4S, D3S bases available;
• There are no problems with installation;
• temperature 4,300 K.

• little light at dusk;
• The stated service life is short (about 200 hours).

This is not the first time we buy and we are satisfied. They correspond to the declared characteristics, last a long time, and shine with a pleasant white light. The light doesn't hurt your eyes, you can see everything perfectly. I recommend purchasing.

OSRAM NIGHT BREAKER UNLIMITED

Suitable for installation in fog lights, since the light beam emitted by it is up to 40 meters longer and up to 110% brighter than from conventional halogen lamps. At the same time, it is not too contrasting and dazzles oncoming drivers less - the lighting is warm white. It is connected to the vehicle's 12-volt on-board network using the PK22s socket.

Comparison table of characteristics

For comparison, we use a table that contains brief parameters of all the listed devices.

Marking

The marking gives the car owner information about the type of base, compliance with current standards, type of plug connector, rated power, and other basic technical characteristics of the device. The relevant information can be found on the device, which is printed on the base. Before purchasing a device, you should make sure that the car's headlights are designed for installation of a particular type of model.

1. T - is a miniature of a base lamp.
2. R is a device with a fifteen millimeter base and a bulb with a diameter of no more than 19 mm.
3. P - model with a fifteen-millimeter base and a bulb with a diameter of up to 26.5 mm.
4. H - the letter indicates that the car lamp is halogen.
5. H1 – single-filament devices for any type of optics. It is the most purchased among all automotive lighting devices. This model is intended for use on low beam headlights. The device can operate without problems for about 500 hours, its power is 55 watts.
6. H2 – similar devices are designed for head lighting (low or high beam).
7. H3 – the device is designed for fog lights. It differs primarily in that it is equipped with a special connector for the cable. As for the filament, it is located vertically in them. Works great in foggy weather. Power consumption – 55 Watt.
8. H4 – two-filament head lighting devices. The operating time is 700 hours.
9. H7 is a lamp for vehicles with four headlights. Designed for car head optics. Power 55 Watt, operating time is 350 hours.

Features of the H3 base

A product with this socket is used only in fog lights. The only difference that exists in this type of product is the separate power wires. Today, the H3 light bulb is produced using different technologies. Among the entire mass of products on the market, several types can be distinguished. Previously, the industry produced only halogen lamps. But today xenon and LED solutions are very popular. They have higher technical characteristics. But they are quite expensive and not everyone decides to buy them. But cheap halogen products have not lost their popularity.

What to look for when choosing

When purchasing such a device, you should definitely pay attention to:

• Colorful temperature. The overall color of the glow depends on this indicator; it is worth considering that the higher the color temperature, the more “cold” the light looks. Traditional incandescent lamps produce a warm light of 2500–3000 Kelvin, neutral white corresponds to a temperature of 3700–4500 K, higher values ​​are typical for cool shades, and a temperature of 5000 K+ is typical for a device with a cyan (blue) light color.
• Base. The base is the contact part of the device, which is fixed in the socket and is responsible for fixation, electrical connection and the possibility of safe removal. Thus, the type of base directly determines compatibility with a particular cartridge.
• Power consumption. This parameter is often used to evaluate the overall brightness of the glow. This indicator directly affects energy consumption and, accordingly, the load experienced by the generator.
• Maximum service life. This indicator is quite approximate and the probability that the device will work for this period is approximately one in three. This service life allows you to get a good idea of ​​the overall durability of the device and its ability to last longer than the warranty period.

In this article we will talk about important elements of automotive lighting - H11 lamps. What types exist, what are their features, advantages and disadvantages - here is information based on current reviews from car owners.

Pin lamps

Pin lamps are the most commonly used automotive lamps. If there can be from 2 to 6 flange lamps on a car, then there are from 10 to 20 pin lamps. The pins on the cylindrical surface of the base can be located either symmetrically or with one of them offset. The pin is shifted in height on two filament lamps (P21/5W) to ensure a certain position of the lamp in the socket. Pins offset around the circumference are usually used on lamps with orange glass bulbs (PY21W). Their appearance is due to the fact that on many modern cars, the direction indicator lenses have become colorless, due to design requirements. According to GOST, the direction indicators require an orange light, so the pins on the socket have been shifted, which makes it impossible to insert an ordinary incandescent lamp into the socket. Also found in the lighting programs of Western manufacturers are halogen lamps for indicator and parking lights (H6W, H21W) with offset pins. This eliminates their interchangeability with conventional lamps.

Which company should I buy an H11 lamp from?

Philips

Philips has been known in the car lamp market for more than 100 years. It is rightfully considered one of the leading manufacturers of this equipment. According to rough estimates, approximately a third of all cars in the world are equipped with products from this brand. All Philips lamps are made of quartz glass, which is durable and highly resistant to temperature changes.

Best H11 Halogen Bulbs

Optimal choice for long-term lighting

The Philips H11 24V-70W MasterLife model provides good light over long periods of use. Ideal for installation on vehicles from large fleets.

Advantages:

• Bright halogen light is provided by a single axial filament;
• Optimal power indicators - 70 W - and voltage - 24 V;
• Extended service life. The operating time is approximately 4 times longer than that of similar products;
• The PGJ19-2 socket fits well with any car headlights;
• No complaints about typical problems or defects;
• Affordable price.

Flaws:

• Color temperature is only 3100K;
• Short warranty period.

The model is optimally suited if the priority is service life.

Cost-effective kit for low and high beams

The set of two OSRAM H11 55W PGJ19-2 Silverstar lamps offers increased illumination, making it ideal for frequent night trips.

Advantages:

• Complete with two parts at a competitive price;
• Increased light output yellowish-white color;
• Luminous flux reaches 1350 lm;
• Can be used for both low and high beam;
• Many reviews note the optimal combination of cost and technical parameters.

Flaws:

• Color temperature 3200K;
• Relatively short service life.

Most often, buyers note the advantages of lamps of this model when driving at night or in difficult weather conditions.

Current model with increased brightness

The new OSRAM H11 Cool Blue Hyper Plus halogen lamp offers improved illumination of the road and signs combined with an interesting design.

Advantages:

• Increased brightness by 50% while maintaining standard power;
• A color temperature of 5000K produces bright white, high-contrast light that is easy on the driver's eyes;
• Stylish design ideally suited to clear headlight lenses;
• The service life is 580 hours.

Flaws:

• According to reviews, it does not always fulfill the declared resource.

If driving tires your eyes, this lamp will be the optimal solution. Also, lovers of automotive aesthetics will appreciate its advantages.

EVO Formance Spectras 93389 H11

EVO Formance Spectras lamp

This lamp with H11 base belongs to the budget category. Technical specifications are standard: power supply 12 V, power 75 W. Despite the fact that no additional changes have been made to the design of the lamp, they provide a bright beam of light with a power of up to 1300 lm. The light temperature is about 5000 K, the color is bright white. In terms of luminous flux power, it is not inferior to 100 W lamps. This indicator is achieved due to the filament of increased strength and a specially selected gas composition.

The space that the lamp illuminates with sufficient intensity is limited to 60-75 meters in front of the car. Since the manufacturer uses standard reflectors, the width of the light beam is slightly smaller than that of competitors. So, at a distance of 25 meters in front of the car, the roadsides are already not bright enough. Also, reviews from motorists indicate frequent overheating of the lamp and damage to plastic parts, this is explained by the higher power of the lamp. The color of the luminous flux corresponds to the declared one.

Best H11 Xenon Bulbs

High brightness and stable performance

The model is a joint product of the South Korean brand MTF-Light and the leading company Philips.

Advantages:

• Durable clear Philips quartz glass bulb;
• Increased brightness;
• Long service life, long service life;
• Luminous flux 3200 lm;
• Suitable for fog and headlights;
• Availability of three types of color temperature;
• Natural light, close to daylight.

Flaws:

• Works well only with MTF-Light ignition units;
• Plastic base;
• Supplied only in boxes of 2 lamps. The price is quite high.

This lamp will appeal to those who value reputable, time-tested brands.

Budget option for xenon lamps

The Matrix Light H11 lamp offers good lighting quality at a reasonable price. It is the latter characteristic that makes the model especially popular on the Russian market.

Advantages:

• Affordable price;
• Long rated service life;
• Works well even with ignition units of other brands;
• High brightness;
• Quartz glass and high-quality metal electrodes;
• Good protection system against moisture, dust and short circuits.

Flaws:

• Low brightness models are not well suited for difficult weather conditions;
• The Chinese assembly raises concerns among users.

Those who are not afraid to trust not very popular brands will be able to appreciate the advantages of the economy option.

Which xenon is better to choose - H1 (h1), H3 (h3), H4 (h4), H7 (h7)

The content of the article:

Good day, dear car enthusiasts! The issue of installing xenon on a car, since the actual ban on the installation of non-standard xenon in 2010, has gradually stabilized.

Those car owners whose car design does not provide xenon find a way out by installing either pseudo-xenon or xenon in the fog lights.

Those drivers whose car’s design parameters allow the installation of xenon devices should have information about which xenon is best to install. And it is this question that we will try to highlight today.

Which xenon to choose from those on the market?

DIY bi-xenon lens installation

So, let us remind you that xenon lighting devices are a fundamentally new technology for road lighting. The xenon lamp is based on the principle of glowing a special electric arc formed by passing electric current through a gaseous medium. To start xenon headlights, there is a special device - an ignition unit.

Based on this, you and I must understand that xenon cannot be made in a homemade way, just as xenon cannot be installed on cars not intended for it. For its production, both special technologies and high-precision high-quality equipment are used. And the manufacture of effective xenon optics is the prerogative of well-known brands.

Traditionally, xenon presented on the domestic market is divided into two types:

1. Industrial (factory) production xenon from leading and well-known manufacturers: xenon lamps and ignition units Philips, Osram, Hella, AL, Matsushita and Koito/Denso, etc.
2. Xenon devices are of Asian origin, usually Chinese and Malaysian.

We hope that you understand which xenon is best to install from the listed manufacturers. If we can only guess what the difference is, then based on tests and studies conducted by experts, the following conclusions are made:

Standard (factory) xenon is characterized by the following qualities:

• long service life. Manufacturers and official dealers provide xenon with a warranty of at least 12 months;
• high level of brightness of xenon headlights;
• reliable protection against break or short circuit in the xenon kit circuit;
• short response time of the ignition unit: usually within 3-4 seconds. xenon enters full operating mode.

To compare the characteristics of xenon equipment from Asian manufacturers (excluding Japan):

• The service life of these lamps varies from 1 month to 2 years;
• the ignition unit has a weak degree of safety;
• original xenon lamps, for example, from Osram, most often do not work with Chinese ignition units, since they have completely different characteristics;
• Xenon enters operating mode from 20 seconds. up to 3 minutes.

How and which xenon to choose?

It all depends on two factors.
The first is what your budget is aimed at. From the answer to the first question, the following follows: you decided to install a minimum set: lamps and an ignition unit in standard headlights, or install a full set of xenon: optics, headlights and an ignition unit. The most relevant is the xenon kit h1 and h4, since sockets of this type are installed on most modern cars. Global standardization is doing its job.

Returning again to the test data, we can present to your attention brands that are distinguished by the quality and efficiency of their xenon lighting equipment. We will not give the main technical and operational characteristics of xenon lamps and ignition units, but will simply show you what equipment is available and which xenon is better to choose. You must understand that these data are also close to the truth.

MTF Light xenon kit , equipped with: Philips xenon lamps h1, h3, h4, h7 and MTF ignition unit. This optics has high coherence, i.e. The effect of light scattering in rain is almost completely absent.

SHO-ME xenon kits compare favorably with their competitors with a wide range of operating color temperatures 4300-8000K. Lighting devices of this brand are available in configurations for all types of cars, both xenon and bi-xenon. They are easy to install and reliable.

The equipment is manufactured with PhXenon lamps, under license from Philips. Running xenon n1, n3, n4, n7.

Xenon kits APP Digital Ultra Slim made in Japan. They are distinguished by the small dimensions of the ignition unit, a high degree of reliability and service life of the flask, and one of the fastest start times of the working cycle, thanks to the perfect ignition unit.

We presented only typical samples that are leaders in the xenon lighting equipment market. The choice is yours. For a clean choice, you also need such knowledge as the classification of the headlight base of your car.

If you don't know what we're talking about, your car's manual should indicate the type of bulbs you have. If not, then there are services on the Internet that contain tables indicating the makes and models of cars, the type of base: for low beam, high beam and PTF headlights.

And they may differ on one car. For example, AUDI A3: low beam - xenon h7, high beam - xenon h1, fog lights - xenon h3. Or Ford Galaxy II 00, respectively: xenon h7, xenon h1, xenon h3.

When choosing xenon optics, take into account all the nuances and features of the modern domestic market. Choose optics only from certified dealers, with a guarantee from the manufacturer, and then you will be sure that you have not “thrown away” your money, and the xenon headlights of your car will effectively illuminate the night road.

Good luck on the road in the dark.

Best H11 LED Bulbs

Bright light with reduced power consumption

The ClearLight H11 Lum 2800 is great for high and low beam lighting. A distinctive feature is the presence of two modifications.

Advantages:

• Availability of standard and budget models with power of 24 and 30 W;
• Reducing the load on the battery due to low energy consumption;
• Large luminous flux;
• Resistance to mechanical stress;
• Long service life;
• Fits well with most cars;
• Switching on and off occurs instantly.

Flaws:

• Quite a high price;
• Works optimally only with lensed headlights. In other situations it often gives errors.

The lamp will be an excellent investment in the long-term operation of lensed optics.

Good model for fog lights

The DLED H11 6W lamp comes complete with lens 732.

Advantages:

• Provides a wide lighting angle – 320°;
• It is possible to choose cold or warm white light, with a high color temperature of 4300-6000 K;
• The lens focuses light well;
• Low voltage, does not require special power supplies;
• Equipped with overload protection;
• Environmentally friendly materials are used in production.

MTF Light H11 Active Night

LED lamps MTF Light H11 Active Night have good quality at an affordable price. They can be used as daytime running lights or in fog lights. Producing a color temperature of 5500 K, the generator carries a load of only 8 W.

These lamps have a long service life (50 thousand hours), which allows you to turn on the lighting for the entire driving time. Powerful American CREE LEDs, which are famous for their excellent quality, are used in production. In addition, a unique diffusion lens makes the light flux not only uniform, but also safe for oncoming drivers.

In reviews of specialists and in consumer reviews, LED lamps MTF Light H11 Active Night are characterized as good optics at an affordable price. They provide uniform, bright light while consuming minimal energy. The disadvantages include the need to adjust the light beam after installing the lamps.

Which H11 lamp to buy

1. If the priority is long service life, you should choose the Philips H11 24V-70W MasterLife, Philips X-Treme Ultinon LED or ClearLight H11 Lum 2800 models.

2. For fog lights, Philips and DLED LED models are the best options.

3. Matrix Light products will be an economical purchase.

4. High brightness of lighting will be provided by MTF-Light lamps with a Philips or OSRAM bulb.

Friends will also be interested in this

Do you want to receive up-to-date ratings and selection tips? Subscribe to our Telegram.

Today, H11 lamps are conquering more and more users. The modern standard is more resistant to overheating, moisture and mechanical stress, compared to standard offerings. However, installing this type of lighting is not enough for effective work. It is important to choose the right product based on the characteristics and requirements of the user. After all, even the best lamp will not live up to expectations if it is selected incorrectly.

What to look for when purchasing

Choosing a good lighting element is quite simple. You just need to adhere to the following recommendations.

1. When choosing, it is necessary to take into account the specific requirements for the type of lighting. If you need to enhance the illumination of distant objects, buy a device with a narrow beam. If you want to improve the visibility of the space in front of the car, purchase a lamp with diffused light.
2. Specifics of application. There are several types of automotive optics. Some lamps are suitable for foglights, others are intended for head optics. Fans of off-road driving will appreciate the powerful emitters for additional headlights installed on the roof of the car - “chandeliers”.
3. Manufacturer – the durability and quality of lighting depends on the company. Companies with well-known names and a good reputation will not take risks for the sake of a penny profit.
4. Condition of the lamp and packaging. Most products are packaged in blisters - individual bags. It is necessary to carefully examine the blister itself for mechanical damage and integrity of the coating. It is also unacceptable to have fingerprints or debris on the glass surface of the part.
5. Certificate of Authenticity. The seller must have on hand a document confirming the origin of the product. The absence of papers indicates that the purchase is dubious.
6. Directly in the store, you need to check the lamp for integrity and functionality. If the seller refuses to check, you should refrain from purchasing.

Why H11

H11 lamps are intended for use in car headlights and fog lights. However, the most popular products concern fog lights. This is due to the type of fastening, which allows the contact groups to be reliably sealed. The requirement is determined by the location of the optics - the backlight is located below the main illuminators and often suffers when driving through deep puddles, fords or high, loose snow.

Fans of off-road use will also find it useful. Emitters of this type are used for additional lighting and auto spotlights.