How to use a Sherkhan Magikar car alarm - useful tips and instructions

Magicar car alarm is a security device against unauthorized access to the car.

The scher khan general control system and alarm system will increase the comfort of the car owner. This device has several useful features that simplify your work and allow you to customize your car.

Starting the engine from the key fob

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline!

In order to remotely start the engine, a number of conditions must be met:

• The automatic transmission selector must be in the “P” position. In the case of a manual transmission, a preliminary “software neutral” procedure is required.
• The hood is closed.
• The parking brake is on. Otherwise, the vibration emanating from the running motor may cause the vehicle to move.

There are two ways to remotely start the engine:

Read also:  Blue smoke from the exhaust pipe causes diesel

1. Select the icon and press the “3” button on the key fob.

Location of key "3"

2. Press button “1” until a beep sounds. Press the “3” key.

Keys "1" and "3"

The warm-up time can be extended by pressing the above combinations again. In order to turn off the car using the key fob, you need to press button “1” long and “4” briefly. An alternative way to turn off the engine is to select the icon and press the “2” key.

How to set up engine autostart? Alarm Starline

With the arrival of cold weather, many drivers are faced with the question of enabling remote auto engine start or temperature-based start. The Starline alarm system allows you to do this if it has been correctly installed and configured. Many car enthusiasts simply do not know how to enable and configure the autostart of their car. There can be many reasons for this - they forgot, didn’t go into details, just bought it, rented it, etc.

Setting up autostart - Starline alarm

First you need to understand that there are two types of engine starting - remote or automatic. Remote start is needed, for example, to warm up the car before driving. Automatic engine starting involves periodically starting the engine, for example at night, to maintain the desired temperature. Autostart can be configured so that the car starts at certain intervals or when the temperature drops below a preset value.

Conditions

Remote engine starting can only be performed if the following conditions are met:

• The gear knob is located in neutral (gears are off)
• Ignition off
• The hood, trunk and all doors are tightly closed
• Parking brake engaged (handbrake)

If any of these conditions are not met, you will not be able to start the engine remotely.

Preparation

In order to put the car in security mode with the Starline autostart function enabled, you need to take the following steps:

1. Stop, do not turn off the ignition. The engine must be running. 2. Turn off the gear, the shift lever should be in neutral position. 3. Put the car in “handbrake” - turn on the parking brake 4. Press button 1 on the key fob and hold it for 3 seconds. You will hear a melodic sound signal. You have 30 seconds to complete the following steps. 5. Turn the key to turn off the ignition and remove the key from the lock. The engine will not stall, but will continue to run.

6. Get out of the car and make sure that all doors, trunk and hood are closed.

After you close the last open door, trunk or hood, the alarm will automatically turn off the engine and lock all doors - the security mode is turned on.

Only after successfully completing these steps will the autostart function be possible and the engine can be started remotely.

Remote start

If you have correctly prepared the car for autostart (closed the door with the engine running and the alarm turned off), then you can start the engine using the key fob in any of two ways:

1. Press button 1 and hold it for 3 seconds. or

2. Select the “START” icon and press button 2.

After this, the alarm will make its first attempt to start the engine. If the engine does not start, a second attempt will be made, and the starter operating time will increase by 0.2 seconds each time. There will be 4 such attempts in total. If the engine does not start any of the four times, you will hear 4 beeps from the key fob.

If the engine starts successfully, the corresponding icon will be displayed (it varies on different Starline models, usually the exhaust gas icon), the car will blink its dimensions 3 times and you will hear 3 siren signals.

The car will warm up for a certain period of time, which is set in the settings. Options: 5, 10, 15, 20 minutes. One minute before the end of the set time, the inscription “r01” will appear on the key fob display. When the time is up, the alarm will turn off the engine, and the exhaust gas icon will disappear on the key fob and the inscription “r00” will appear.

Autostart based on temperature

In winter, many people need to warm up their car at night so that there are no problems with starting in the morning. When you enable autostart based on temperature, you can set the ambient temperature value at which the engine will start. The following temperature values ​​can be programmed: -5, -10, -20, -30.

To enable the temperature start function, select the icon with a thermometer and the inscription “START”, and press button 2 on the key fob. At the same time, you will hear a melody sound and the value of the set temperature threshold should be displayed.

To turn off automatic start based on temperature, select the thermometer icon again and press button 2 on the key fob.

If, while the engine is warming up, you need to get into the car (to start driving or just take something from the cabin), press button 1 on the key fob - the locks will unlock. Within 30 seconds, insert the key into the ignition and turn it to turn the ignition on. If you do not have time to do this, the locks will be locked again and the security mode will turn on. In order to completely exit the autostart mode, lower the handbrake - the dimensions will blink once and a melody sound will be heard - you can drive.

Now you know how to enable engine auto-start using the Starline alarm system. The most common mistake drivers make is that they do not carry out the necessary actions to enable auto start and manually close the switched off car using the key fob. I hope now you have no questions about using the alarm functions.

vmiredorog.ru

Reasons for the impossibility of autostart and ways to eliminate them

The reasons why autorun does not work can be caused by three main factors:

1. Incorrect actions of the car owner, for example, forgetting to go through the “software neutral” procedure.
2. Failure of security system elements, for example, sensors.
3. Installation errors, as a result of which any wire is missing or connected incorrectly.

If the owner's error does not allow the car to start automatically, then you need to refer to the documentation that came with the security system. There you can also find out whether the car alarm connectors are connected correctly. Physical damage requires an individual approach, so it is better to entrust their elimination to professionals.

To protect their car as much as possible from theft and burglary, drivers use car alarms. The best of its kind starline a92 dialog CAN flex will provide maximum protection due to its characteristics. Thanks to the included remote control, protection is carried out at a distance. In addition, thanks to starline a92, you can configure the engine to start automatically at a certain time or at the desired temperature.

Car alarms also have a useful advantage - uninterrupted operation in large cities where there is a lot of interference. And the instructions and installation guide will simplify the installation process. In addition, the alarm can be registered for a specific car. And the “autostart” function will make life easier for many motorists. Thanks to the presence of the transmitter, you can use many service functions of the car from a distance. The transfer is carried out using a special encrypted code. This provides additional protection against code grabbers. Plus, the code is transmitted at hopping frequencies.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline!

Car alarms can be installed either independently or in technical installations. services. The reason is that starline a92 dialog CAN flex has a standard design. But when installing it yourself, you must have a good knowledge of the car’s structure, not only in theory. In addition, you need to stock up on patience, time and measuring equipment in order to correctly connect the wires that supply power and control the autostart.

What you need to know before installing an alarm

Before installing an alarm system on your car, you should not rely on videos or advice on blogs. The good wishes of car owners are not general instructions, and when connecting the “alarm” on different brands of cars, not only the type of car is taken into account, but also the year of its manufacture, type and much more. The fact is that the connection diagram will differ in different situations. This is done for a reason. If all systems work according to the same principle, then it will be much easier for hackers to bypass them. Therefore, it is best to familiarize yourself with the standard wiring of your car and the instructions for a specific alarm.

Important! There are many wiring diagrams for security systems, where the colors of the wires may differ from generally accepted standards. Some manufacturers create new wiring diagrams that even experienced installers cannot figure out.

Here is an example of a typical connection diagram for a modern alarm system from StarLine, model A91.

It can be seen from the diagram that only those wires that come with it are marked with colors. The wires to which the connection is made, and these are the wires of the car’s electrical network, are indicated by black lines. Therefore, when carrying out work, you will have to combine two existing circuits (alarm circuit and car electrical circuit).

Be sure to use electronic meters to “ring” so as not to confuse anything. It is not recommended to use the usual “paw”.

The main alarm connection points are as follows:

• “+” – positive polarity (location point in the engine ignition switch);
• starter – negative polarity (placement point in the ignition switch);
• ACC – positive (point in the ignition switch);
• ignition – positive (can also be located in the ignition switch);
• central locking – negative;
• doors – positive;
• dimensions – positive (location point in the dimensions switch);
• brake – positive (location in the “frog”).

It is also better to immediately decide where you will place all the sensors and the car alarm unit itself. And also prepare all the necessary tools.

What is included

• Wires
• Two keychains. One with LCD screen, the other without;
• CSB (Central Alarm Unit);
• Transceiver (provides communication between the key fob and the central control system);
• Hood button
• Light-emitting diode;
• Service button;
• Engine temperature sensor;
• Installation instructions;
• User guide;
• User manual.

Wires are needed to connect all parts of the alarm. In addition, they are used to connect the central heating system and the vehicle ignition. This, by the way, is an important and necessary point. The key fob is needed to control auto start, service functions and notify the owner of an attempted break-in or theft.

The kit comes with two remote controls. The second one is a spare. No one is immune from unexpected unpleasant incidents. Breakdown or loss will not leave the motorist without remote control of the car. True, the second key fob does not have a screen, which is certainly inconvenient. But buying another key fob and “teaching” it a special car code is not difficult.

The central alarm unit is the “brain” of the entire system. It receives a signal, decrypts it and performs a specific task. The transceiver is usually mounted on the windshield. With its help, the code is received and transmitted from the remote control to the central control system. The hood button is necessary so that the owner has a free access to this part of the car. In addition, the alarm housing is installed next to the fuses, and the limit switch is located above the left headlight. This provides additional protection against hacking. The limit switch is needed to send a signal to the remote control in case of unauthorized opening of the hood.

The LED informs the owner that the alarm is working. The starline a92 dialog can flex service button performs the same functions as the button on the key fob. The operating instructions and installation guide guide you through installation and use. But in order for autostart to be controlled correctly, it is best to contact specialized technicians. Services.

The key fob transmitter is an important thing for protecting the car and managing its service capabilities. Therefore, its appearance and properties meet all the owner’s requirements. This means that the body is made in accordance with the requirements of convenience. Convenient placement in the hand is not everything. The key fob is shaped in such a way that the owner can easily and quickly find the necessary buttons by touch. The keys themselves are convenient, informative, and notify the owner that the selected command has been completed. Often it's just click after click.

ALLIGATOR APS STARLINE B92 (autostart) STARLINE B62 STARLINE A92 (autostart) STARLINE A62 STARLINE B9 Dialog (autostart) STARLINE B6 Dialog STARLINE C9 (autostart) STARLINE C6

STARLINE B9 (autostart) STARLINE B6 STARLINE A9 (autostart) KEY RING STARLINE B6/B9 KEY RING STARLINE A8/A9 KEY RING STARLINE C4/C6/C9

StarLine A92 Dialog is an interactive car protection system with an intelligent autostart function.

New for 2010. Reliable car security system with interactive authorization, individual encryption keys, auto-start, and intelligent auto-start function. Designed to work in conditions of extreme urban noise. Designed to protect cars of medium and high price ranges as part of the StarLine “Pobedit” security system.

The car security system has a full range of security and service functions, plus:

Dialog authorization
. The dialogue
control
with individual encryption keys of 128 bits in length eliminates intelligent electronic hacking
and is resistant to all existing code grabbers. To protect the code, the most advanced conversational coding algorithm currently available, as well as the innovative frequency hopping method, are used. In this method, during the transmission of commands, a specialized transceiver repeatedly changes frequencies according to a special program during the period of each transmission. A solution of this level, known by the technical term “frequency hopping spread spectrum technique,” ​​is the first in the world to be used in an alarm control system and is a very significant complication of any code-breaking attempts.

Megacity mode.

Increased control and warning range, as well as reliable operation in conditions of extreme urban radio interference, are ensured by the use of a 128-channel narrowband patented transceiver with frequency modulation and narrow bandwidth. A specialized signal processing program, narrow-band filters, as well as reception and transmission channels optimally distributed along the edges of the 433.92 MHz frequency range allowed us to improve the signal-to-noise ratio by 8-10 dB and double the range and noise immunity.

Intelligent autostart.

StarLine A92 Dialog is designed for remote and automatic engine starts. The special StarLine Smart Start interface controls the process of remote starting and operation of any engine. Automatic starts are possible at a predetermined time, when the temperature drops below a specified limit, and regular periodic ones. In StarLine A92 Dialog, the engine voltage control algorithm has been upgraded, which allows you to reliably register the start of engine operation and simplifies installation, allowing in some cases not to look for tachometer or generator signals.

Ergonomic and reliable key fob.

The key fobs have an innovative design and a hidden antenna location. This allows you to increase the reliability of the key fob design and implement an ergonomic control method. The new 4-button control interface adopts the “master button” principle. The easy-to-find main button performs the main alarm command - arming.

Comfort.

The key fobs implement an intuitive control principle. All pictograms on the keychain are in Russian. LED backlighting ensures comfortable work with information on the display.

Full protection.

The “dialogue” encryption code is used in both the main and additional key fobs.

Benefits for installers:

• The function programming algorithm has been modernized. Now online on the key fob display you can see the function number and its programmed value.
• The control of additional channels has been modernized, making it possible to install the StarLine A92 Dialog system on all modern cars.
• StarLine A92 Dialog models can be easily transformed into a security and search complex by adding one of the StarLine GSM/GPS modules, which will connect to the alarm system via a local network via one single 3-pin connector.

More than 50 standard and programmable functions provide the car owner with not only reliable protection, but also comfort when using the StarLine A92 Dialog
.

The Starline A92 alarm is one of the best car alarms on the market today in terms of price and quality. One of the advantages of the “alarm” is remote control using the Starline A92 Dialog key fob. In city conditions, the device works flawlessly, without reacting to interference. The installation is designed for 5 years of active operation.

[Hide]

What types of security codes exist in car alarms?

Let's remember what types of security code alarms there are.

Here are the following options:

1. Static control code.

Devices with this code belong to the category of budget models and have the lowest price.

As already mentioned, such alarms have been discontinued due to low reliability.

The main disadvantage is the risk of intercepting the code and then using it to hack the car.

2. Dynamic control code.

A special feature of systems based on this principle of operation is a changing code that is generated each time the button is pressed.

Such a signal is also easy to intercept, but using it for its intended purpose is more difficult - a lot of time will be spent decoding the signal and subsequently hacking the car.

3. Dialog control code and signal exchange.

The main advantage of such a device is the “binding” of the alarm to a specific control unit.

During the exchange of signals, the identification code is verified, after which the “brain” makes a decision - to stop or continue the exchange process.

Specifications

The alarm has the following characteristics:

1. It operates at a frequency from 433.05 to 434.79 MHz, which guarantees greater security compared to other “signals”.
2. To protect the dial code from hacking, individual 128-bit encryption keys are used.
3. Additionally, a relatively new method of frequency hopping is used, which makes hacking the security system much more difficult. Thanks to the 128-channel narrowband transceiver, the range of the key fob increases. In the mode of transmitting commands to the block, the range is 800 m², from the block - 2000 m². The maximum range of the second key fob is 15 m².
4. The operating temperature at which the “alarm” is able to efficiently perform its function, according to the developers, ranges from -40 to +85 degrees.
5. The DC supply voltage is 9-18 mA, in security mode it reaches 25 mA.
6. Shock sensor type: piezoelectric. The advantage of this type is that it can record any mechanical effects on the car. In addition, it can be combined with other alarms if the need arises.

An overview of the Starline A92 car alarm and all its functions can be seen in the video below. Taken from the autoPulse channel. ru.

Installation of a car alarm using the example of a VAZ 2110

The installation of a car alarm in a VAZ 2110 car can be divided into 2 levels: installation of all elements of the alarm system and connection to the car’s electrical circuit. The most labor-intensive work, perhaps, can be called installing electrical wiring in the doors and trunk of the car.

The process of installing an alarm system on a VAZ 2110 car

1. The hood and trunk opening sensors are mounted in such a way that a short to ground occurs at the very beginning of opening.
2. To install the hood opening sensor, we make an additional fastening. To do this, we use the mounting plate for the electric door lock drive.
3. After securing the bracket, insert the sensor into it, adjust it in height and fix it in the selected position using the lower nut. Armed with an ohmmeter, we check how securely the sensor is connected to ground.
4. The sensor for the trunk is installed in the same way.
5. As practice has shown, it is best to mount the siren under the hood on the connector of the right mudguard. Do not forget that it is better to point the horn down to prevent moisture from entering it.
6. We fix the shock sensor (impact sensor) under the dashboard using self-tapping screws.
7. The microwave sensor is best placed in the central part of the car. Installation instead of the standard rear ashtray is good for this purpose. The ashtray must be dismantled, its holder removed and the sensor installed in it. The sensor wiring is laid in the lining of the central tunnel. The sensor must be securely mounted so that it can well perceive all body vibrations.
8. The central unit is installed behind the injection controller.
9. The last stage is the installation of the pager transmitter. We attach the sensor to a degreased windshield, having first removed the film from it. The wiring from the sensor is hidden under the lining of the windshield pillar.

We connect the wiring in accordance with the diagram attached to the alarm system you have chosen.

Equipment

The standard equipment of the Starline A92 car alarm includes:

• central alarm unit;
• key fob with two-way communication and liquid crystal display;
• key fob with two-way communication without LCD display;
• two-level screen sensor;
• transceiver;
• hood button;
• Light-emitting diode;
• service button;
• set of wires;
• engine temperature sensor;
• installation instructions;
• user manual;
• User's note.

Car alarm system Starline A92

How to use a car alarm

Author KakSimply!

Most modern security systems have numerous functions, the operation and configuration of which are sometimes difficult for even a professional to handle. Moreover, the alarm can be programmed using the remote control, which means that the buttons must be used carefully. Therefore, before starting to use the alarm, carefully read the operating instructions.

Instructions

Look at the alarm key fob. Nowadays, feedback alarms that have an LCD display are very popular. It symbolically displays everything that happens to the car. If an alarm goes off, you will immediately see exactly what the problem is. But such keychains require very careful use. On the side of the case they have 4 buttons (on a standard system): opening the central locking, closing the central locking and two buttons for additional channels. These buttons can be programmed to open the trunk lock and autostart the car. Learn to press the buttons correctly. The buttons must be pressed for different durations. If you want to arm the car, make a short press and hold the button for no more than 5 seconds. When you press the button for a long time, a melody will appear, which means that the system has read your request as arming without sound. If you mix up and quickly press two “disarm/arm” buttons in a row, the system will be armed, but the siren will not respond to external influences. Do you want everything back the way it was? Disarm the alarm, wait a few seconds and arm it correctly. Try not to enable the anti-hi-jeck function unnecessarily. This function is designed to shut down the vehicle in the event of a theft while it is within the system's range. Most motorists carry an alarm key fob along with their key. Although, to ensure greater security, it should be kept separately in your pocket. If you are thrown out of the car and you have the key fob, press a certain combination of buttons with different durations and the car will stall. But if you accidentally entered the system into the anti-hi-jeck from the key fob by randomly pressing it, you can disable it only by entering your personal code using the valet button.

Video on the topic

Print

How to use a car alarm

www.kakprosto.ru

Advantages and disadvantages

Reviews from owners of the Starline A92 car alarm are mostly positive. Among the advantages, it is worth noting the clear display of the key fob in Russian with accessible controls. Those who installed the alarm system themselves talk about the ease and simplicity of installation. I am pleased with the level of reliability and range.

According to some users, cons are extremely rare. Malfunctions are associated with the operation of the key fob, which can respond to an accidental press while in the owner’s pocket or purse. There have been complaints that the security system does not work the first time during severe frosts. We were talking about turning it on on the third attempt at a temperature of -20 degrees.

Materials and tools required for alarm installation

Regardless of the manufacturer of the selected security system, you will find in its kit:

• Control block;
• sensors (motion, impact, opening of doors or windows, etc.);
• signal transmitter and receiver;
• sound device;
• set of wires;
• additional control panel;
• instructions.

Since the instructions are the most important figure, without which independent installation and repair of car alarms will be impossible, you should make sure that this document is Russified.

Materials you will need:

• a measuring device (multimeter), which is better to choose an electronic type rather than a pointer type;
• additional wiring, in case the standard wires are not enough (and this will most likely happen);
• dark foam rubber for secure packaging of the alarm unit;
• high-quality electrical tape and tape;
• tools for dismantling various panels, doors and other elements;
• socket wrench;
• knife.

Installation instructions

You can install a car alarm yourself, but it would be better to install it with the help of specialists. In the first case, the installation manual for the Starline A92 Can car alarm must be read carefully before starting work. It is advisable to reread the instructions for the car in advance or keep it nearby. If it is missing, you can download it from the Internet.

Step-by-step installation of a car alarm looks like this:

1. We place the central block in a hidden place. This could be the area under the dashboard, as long as you avoid moisture and heat. You can secure it using self-tapping screws or tape.
2. We attach the transceiver module to the windshield. The antenna must be positioned in such a way that there is at least 5 cm remaining from metal body parts, rain and light sensors. It cannot be placed in areas where tinting or sun protection strips are applied.
3. The siren is located under the hood of the car, away from sources of heat and moisture, with the horn facing down.
4. The shock sensor must be secured with a metal tie or tape on a metal surface.
5. The temperature sensor is secured with cable ties to the cooling system pipe next to the engine block. Can be placed on metal parts adjacent to the engine using an M6 screwdriver. Do not install near the exhaust manifold. The correct inclusion will depend on the correct location.
6. The LED indicator is installed in a visible place on the dashboard.
7. The hidden button should be installed in an accessible place, but not conspicuous.

Location of buttons on the key fob for setting functions

Setting up autorun

Intelligent start Starline A92 Dialog allows you to configure automatic engine start using the key fob by:

• time;
• temperature;
• alarm clock

Before programming, on cars with manual transmission you need to put the gearbox in program neutral. More details on how to do this are described in the instructions. Cars are automatically transferred to the parking position. To prevent the car from moving during installation, you should put it on the handbrake. The hood and trunk must be closed.

Configuring autorun by time

Step-by-step programming looks like this:

1. Click the icon with the image of a clock.
2. Then press key 3. The same button, immediately after enabling the option, adjusts the autorun time.
3. By pressing this combination again, you can extend the autorun time.

To disable a custom function, use a combination of one (long) and four (short). You can choose another option - an image of a fan with blades and a two.

Temperature trigger setting

You can choose from the programmed temperature settings the one that suits you perfectly. Then program the time after which the mode will turn on. The shortest interval between starts is 1 hour.

The setting is done by clicking on the thermometer image and the three. The car's lights will flash, and the key fob will display the temperature that must be present for autostart to occur. After which the current time will be displayed on the screen. To disable the option, you need to move the remote control cursor to the indicator in the form of a thermometer.

Setting the alarm to start

To configure, just click on the clock image and the three. Then set the desired time. To disable the autorun option, you need to move the remote cursor to the clock-shaped indicator.

Keychain communicator

Alarm system with auto start Sherkhan requires preliminary preparation before the first start. During storage and transportation, it is advisable to protect the battery from discharge. To prevent it from discharging during normal use, an insulating gasket is installed between the contacts of the battery and the switch. It can be made of paper.

The Sherkhan Magikar 7 comes from the factory with a spacer layer in the battery compartment that cuts off the power and retains the charge. To do this, open the compartment cover and move it aside. Remove the battery and remove the interlayer.

After this, install the battery (observe the polarity) and close the cover. After this, the device is completely ready for use.

You will also need to configure autorun. To do this, you just need to set the correct time and the adjustment is complete. Now you can set a timer to turn on the systems.

The size of the keychain is convenient for carrying in a pocket, and you can carry it with you in a backpack. A small screen provides information about the current state of the car, its voltage, thermal mode and battery charge.

In case of loss or damage, the driver can gain access to the car. To do this, an individual password is created that allows you to open the door without using a switch.

Switch functionality

• Head unit control. For control, there are four keys on the key fob, pressing which or a combination of them provides full functionality.
• Magic Code protection and interception system, ensuring the safety of the car owner and the complete safety of the car from possible hacking.
• Graphic and audio confirmation of a completed command.
• Vibration alarm.
• Adjusting the volume of the confirmation sound.
• Radio communication range over eight hundred meters.
• LCD backlight.
• Data on the actual board voltage inside the vehicle.

• Temperature indicator inside the cabin and in individual areas.
• Current time.
• Information about continuous operation of the power mode.
• Start the motor remotely, without turning it on manually. This function is most often used in winter, when preheating the engine is required.
• Programmable way to set power mode timing. An important feature of this technology is the convenient time adjustment in one-minute increments.
• Alarm notification.
• Possibility of full programming of device functions from one key fob. There is no need to connect a computer or be directly in the car. Just enter the main menu using the key combination.
• Standard triple A (AAA) batteries.

In fact, from one key fob it is possible to completely control most of the car's functions without even getting up from your seat.

Only four buttons are used for control; no mobile clients are required.

The programming of functions itself is within the power of everyone. No knowledge of languages ​​is required, since control consists of a combination of keys and holding time.

Additional facts to remember when installing an alarm system with auto start

Alarms for cars with auto start and feedback require special attention during installation. Every owner who wants to protect his car from theft by installing a powerful car alarm should know that its proper operation depends on the installation method. In addition to what is stated in the instructions, a person must be guided by the following rules:

• you need to place the security system system unit in a place with limited access to moisture, heat and radiation waves;
• in order to avoid bending of the wires and their subsequent breakage, it is necessary to use special rubber tubes as a protective mechanism;
• wiring should be installed exclusively in dry areas of the body;
• It is forbidden to lower connectors into metal parts of the car body;
• The wiring harness must be wrapped with high-quality insulating tape.

Maps for installing car alarms are included in the instructions for the device. If it is easier for the car owner to use their Internet schemes, this is also a good solution. Each driver will be able to independently install alarms with auto-start and feedback functions. To protect his car, he needs the security system itself, a diagram for its installation and a set of tools. The feedback and autostart functions should be checked immediately after mounting the system. Three beeps – the installation was unsuccessful. If there is only one signal everything is fine.

Self-installation of a security system for a car with auto start and feedback is possible, but for this you need to be patient and do everything according to the rules.