Pros and cons of painting a car with liquid rubber

Much has changed in the superficial tuning of cars after the advent of a wonderful material called “liquid rubber”. Automotive liquid vinyl has made it possible to quickly stylize parts, while maintaining the possibility of returning the original appearance. The film also allows you to temporarily change color, but is completely unsuitable for complex parts, such as wheel rims. In turn, ordinary painting is forever, which does not meet modern needs for constant updating of the image. Liquid rubber for cars completely resolves these issues without compromise.

Automotive liquid rubber. Where paint and vinyl are not suitable.

If you are bored with your car's original color, just change it. Using rubber paint, you can completely transform your iron “buddy” in just 24 hours. This material is much cheaper than standard automotive paint and vinyl films. To paint a car with rubber, lengthy and thorough surface preparation is not required. Therefore, the service itself will be inexpensive. At least compared to traditional painting and vinyl finishing.

Low cost is one of the main arguments why you should choose liquid vinyl over alternative options. After all, if you don’t like the new color, removing the elastic coating is even easier than tearing off a piece of sticky tape. In contrast, liquid automobile rubber will not leave permanently ingrained traces of glue. It is adjacent to the paintwork, delicately protecting it, but not eating into it. Underneath it remains as untouched and shiny as it was before.

It happens that a car needs to be transformed for some occasion. For example, to participate in an exhibition, amateur racing or other event. Experimenting with permanent paints and films will not work. After all, you can’t explain to them that they won’t be here for long. Liquid rubber for a car is a completely different matter. It will help you radically change the color, draw contrasting lines and patterns. You can depict on it everything that you have enough imagination and skill for and amaze those around you. And after the event is over, you can safely tear off the decorative layer and make your car respectable and solid again.

If you are simply attracted by the noble matte finish of rubber, you can create a one-color coating. With its help, you will not only give a new look to your car, but also protect the paintwork. Of course, covering your car with liquid rubber will not save you from impacts in a collision or the actions of desperate vandals. But it will perfectly protect against minor impacts. It will not allow abrasions and microcracks to form, and will not allow corrosion processes to develop. After removing the film, the body will shine like new.

Covering with liquid rubber is justified even if the car has no defects. Rubber “clothing” will allow you to operate it without fear that its value will sharply decrease due to wear and tear of the paintwork. And if you plan to replace the vehicle after some time, then before selling it you will simply need to free it from the “suit”. Thus, the car will serve you well and at the same time remain safe and sound.

Of course, you can cover it with film. But in this case, it will not be possible to remove the vinyl layer without consequences. In addition, the protection will be much worse due to the fact that this material is much thinner than liquid rubber. In addition, it costs significantly more and such work cannot be done in one day. After all, in order to cover parts with film, you need to have serious experience, carefully cover the body and expel the air. And this is a rather labor-intensive and painstaking process.

Liquid rubber body coating technology

Required materials and tools

Liquid rubber is divided into three main types:

1. Bulk . This type of liquid rubber is prepared immediately before starting work and then applied to the surface of the car.
2. Sprayable . This type will require special installation. A special unit mixes solutions of salt and bitumen mastic. The resulting composition is applied to the surface.
3. Painting room. This liquid rubber looks like a paste and is applied to the surface manually. You will need spatulas, brushes and brushes.

Depending on the type of rubber, different materials and tools must be used.

Spray rubber is most often used, so you will need: thick liquid rubber in cans and its solvent, masking tape, polyethylene, cardboard to protect areas of the body that will not be painted, a sprayer with a compressor or an electric paint gun, a knife to remove remaining coating.

Preparing the car body

Before applying liquid rubber, you must thoroughly wash the body and dry it. After this, the surface to be painted must be cleaned of grease stains and other substances (including protective coatings). Next you need to perform a series of actions described below:

1. Cover the radiator grille, bumper and air intakes with cardboard or masking tape.
2. Remove the frames for attaching the state license plates, as it will be quite difficult to cover them.
3. Cover the rubber window seals with masking tape. Cover the glass with plastic film.
4. The car wheels should be covered if you do not want to paint them. But this is not recommended, since the wheels come into direct contact with the roadway. If you nevertheless decide to apply the material to the wheels, then take care of the safety of the brake pads and other elements of the braking system.
5. Various types of spoilers, door handles and deflectors are recommended to be removed before coating. It is recommended to coat them with liquid rubber separately.

Don't forget to prepare the material itself. To do this, dilute the material to the desired consistency using a solvent. Check the proportions in the instructions for use. Then pour the solution into the sprayer through a special mesh filter. This will help avoid uneven spraying due to coarse particles. Next, set the minimum paint flow and test the sprayer on any convenient surface. By increasing or decreasing the feed, achieve an even spray of liquid rubber.

Application of liquid rubber to the body must be carried out using a personal respirator to protect the respiratory system. Before work, make sure the room is ventilated. The room temperature must be at least 18 degrees Celsius. Avoid exposure of the body to sunlight.

Coating a car body

Hold the sprayer at a distance of 13 - 16 centimeters perpendicular to the surface to be painted. Apply liquid rubber smoothly in 2 - 3 layers. The first layer should be the thinnest. This will ensure the strength of applying further layers. The first layer does not always completely and evenly paint the entire surface of the car. After applying each coat, leave them to dry for 15 minutes.

The second layer is applied more evenly and thoroughly than the first. After its application, the transparency of the rubber coating should be at least 70%. After applying the second one, you can apply an unlimited number of layers, depending on how intense the shade you want to achieve. If you want the car to be easy to remove from the coating, it is recommended to apply at least 10 layers. When all layers have been applied, it is necessary to dry the coating for an hour. After the material has dried, carefully remove the masking tape and liquid rubber from parts to which it should not have been applied (headlights, locks, etc.). The coating can be easily removed until it has completely cured. The final hardening of the coating occurs in approximately 12 - 14 hours.

This is interesting: The “Charged” Audi RS4 station wagon is ready for its debut in Geneva

After applying the coating, the car cannot be washed for three days. It is not recommended to use car wash services for a month. Avoid fuel and oil leaks.

Liquid vinyl for cars. We change the color every week.

Thanks to the extensive color palette in which liquid vinyl for cars is presented, shades can indeed be changed at least once a week. And if there was such an original that would not mind paying for painting every time, then within a few months it would definitely never be repeated. The fact is that in addition to ready-made mixtures, there are also a lot of pigments on sale. Therefore, each color comes in dozens of different shades.

It happens that the old tone becomes boring, and the owner wants changes. Excessively bright, poisonous, flashy colors can be incredibly boring and cause irritation. Calm neutral tones may seem too boring. Dark ones are too gloomy. Every mood needs its own color. And if earlier emergency changes were not possible, today they can be done without problems.

Want to change the mood of your car? Cover it with liquid vinyl and you won't recognize it. And when you miss your old “friend”, you can remove the covering and return it to its appearance. This will only take a couple of hours.

Coating a car with liquid rubber will allow you to transform an aggressive design into a light, airy one in one day. Making this amazing transformation couldn't be easier. It is enough to paint a dark, respectable car in any shade of pink, and no one will believe that just yesterday it belonged to a representative of the stronger sex.

In the same way, you can give the car a militaristic style, or give it the features of a sports car. You can experiment endlessly, especially if you use liquid vinyl in a can. And removing the results of creativity will not be difficult. The most important advantage of liquid rubber is that it does not spoil the paint. Therefore, you can apply and remove it as many times as you like.

What to choose: liquid rubber for cars or paint?

The answer to this question depends on the wishes of the car owner. However, there are situations when choosing rubber paint is more preferable.

Firstly, it is several times cheaper. At the right time, you simply may not have the required amount for standard painting. If damage appears on the body, it must be isolated immediately. The unpainted area must not be left open and in contact with moisture. The corrosion process will begin immediately and time will not be on your side. The faster you eliminate the consequences, the greater the chance of maintaining the integrity of the body. And since liquid vinyl is not that expensive, you won’t have to put off repairs until better times.

Secondly, the procedure for covering a car with liquid rubber can be called super-fast compared to conventional painting. The fact is that it does not require long preparation. Meticulous grinding and priming of the surface is not necessary. The car only needs to be thoroughly washed and degreased. There is no need to thoroughly disassemble the car - a minimum of individual parts are removed. It is enough to cover the areas that need to be protected with film, secure it with masking tape and you can start painting. Rubber car paint is applied in several layers. The interval between applying each subsequent layer is 40 minutes. It is enough to spray the rubber on the surface 6-7 times and the job can be considered completed. All that remains is to remove fragments of frozen rubber from the headlights, emblems and license plate.

Thirdly, a huge number of shade variations allows you to get absolutely any color you want. A huge number of pigments further expands the palette, and matte gives any shade brightness, richness and nobility. In addition, small defects are practically invisible on the matte surface.

Fourthly, a high-quality coating is durable and repairable. To restore car enamel, it is necessary to remove the damaged part, but with liquid rubber this is not required. If it so happens that the vinyl layer for some reason has lost its integrity, this problem can be easily fixed. To do this, you only need to paint a separate area. It is enough to carefully smooth out the damaged fragment and paint over it.

Fifthly, liquid rubber for car painting really protects the body and wheels from the effects of reagents, sand and small stones. Thanks to it, chips and scratches will not appear on the paintwork. She will protect him from sticky buds, waste products of birds. And even if it itself loses its presentable appearance, it is much easier to restore it. If the rubber layer is damaged, while the warranty is valid, the coating will be restored to you free of charge. If the post-warranty period has come, that’s also okay. The service will be completely inexpensive.

Stages of painting a car body with liquid rubber

Sequence of actions when painting a car:

1. DIY car painting with liquid rubber

   you should start from the rear pillar and slowly move towards the roof;

2. then paint the opposite pillar and trunk lid;
3. then apply the solution to the left wing, right up to the doors;
4. go to the front door;
5. apply the working mixture to the wing and headlights;
6. paint the hood, moving from both sides to the center;
7. the next stage is processing the rear headlights with grille;
8. We finish by applying rubber to the front right fender, door and rear fender.

Using this procedure, you can easily avoid “paint overspray”. The initial layer should be almost transparent. The main task of the 1st stage is to create the foundation. The initial layer must be dried for 45 minutes. Create a repeat layer using the same scenario, but much slower. At this stage, pay more attention to kinks, handles and other small details. At the end of applying the 2nd layer, unpainted stripes may be visible in some places. Their transparency can reach 70%.

Removing liquid rubber from car headlights

Each subsequent layer must be applied in a similar manner. The painted body dries in an hour on average. After the coating has completely dried, remove the tape, film and excess residue of the hardened substance. After completing the above work, give the applied coating 24 hours to dry completely.

Plasti Dip does not change its own characteristics over the temperature range from -35 to +95 °C. In severe frosts, the coating does not crack and does not become too plastic at high temperatures. It is recommended to apply this coating at temperatures up to 20 degrees, protected from gusts of wind, solar radiation and sudden temperature changes.

You can talk for a long time about the advantages of this material, but it should be determined only after personal testing.

A can of liquid rubber for painting wheels.

Liquid rubber for cars in a can is a simple and affordable way of tuning. Thanks to it, in just a few hours your car or bike will acquire individuality, become spectacular and extraordinary. Bright wheels look great in combination with a black body. They can also be painted in the same color as the body, or in any contrasting shade. White wheels will give the car a sophisticated, elegant look, while black wheels will add masculinity and solidity. In any case, painting the wheels with rubber will become the highlight of the car and you will not have a chance to go unnoticed.

If you want to update your car's rims, a can of liquid rubber is the best option for this. It doesn’t matter what you needed it for - for decoration or for protection. The rubber coating will provide everything you need. Painting the wheels with liquid rubber will give them an attractive appearance and protect them from damage. It is much more difficult to damage material coated with rubber paint. Liquid vinyl will camouflage and hide existing defects, give the car originality and emphasize the style of its owner.

Buying liquid rubber in a can is much more profitable than using a bucket of material along with the equipment. This option is simply ideal for painting wheels, since you can start working without prior preparation. This is the main advantage of this product.

To paint a wheel rim you don’t even need to remove the tire from it. It is quite enough to wrap it in film and tape it around with masking tape. Then you need to apply several layers to the cleaned and degreased surface. To ensure good adhesion, the first layer must be applied very thinly. It should be almost transparent. With the following approaches, the material is sprayed more densely.

Pros and cons of rubber coating

Liquid tires for cars have several advantages and disadvantages that you should know about in advance. Let's start with the good, the advantages:

1. Polymer-based paint is a reliable protection for the body from most possible negative influences.
2. Rubber in liquid form perfectly covers parts even with complex geometries, so it can be easily applied to the entire body without the need to remove individual elements.
3. This coating can be applied over the base paint material without preliminary work.
4. High-quality rubber paint can be easily removed from the body without leaving any traces.
5. There are options with various visual effects that allow you to make your car brighter and more attractive in appearance.

Of course, all this is good, but there are points that worry many car enthusiasts. Here are the disadvantages of rubber paint:

1. Painting with rubber is more expensive than analogues.
2. The service life is limited to a maximum of 2 years under ideal maintenance conditions. Some users noted that the coating peels off 10-11 months after application.
3. Cannot be three-dimensional, the ability to create drawings is not supported.
4. When removing the varnish, traces may remain that can only be removed by deep polishing the body.
5. It can peel off if you touch the edge of the coating, which makes it necessary to wash the body very carefully.

Painting a car with liquid rubber has pros and cons, like any other material, but is it worth it? It depends on the driver's preference. If the user loves beautiful tuning and wants to decorate his car with vinyl, then this is not the right option.

Painting a car with rubber paint is also not the most practical option for cold regions where temperatures can drop below 30°C.

In other cases, it is an excellent protective coating for several seasons that you can apply to the body yourself and then remove.

Liquid tires for cars in Moscow.

Our company offers liquid tires for cars in Moscow from various manufacturers. Along with the pioneers in this area, the Plasti Dip company, several other companies present their products. The most famous brands are Color Dip and Rubber Paint. In our catalog you will find a huge selection of liquid vinyl from these companies.

In addition to the main products, we offer all the necessary related products. It’s more convenient to buy everything in one place and not waste time traveling to different stores. From us you can buy liquid rubber for cars and a complete set of everything you might need when working with the material.

You will definitely need:

• Equipment – ​​compressor, spray gun;
• Protective equipment – ​​respirator, special clothing, glasses;
• The necessary products for high-quality painting are a special solvent, a means for removing grease from the surface, and napkins.

Our range includes a huge number of shades. But if you want to create an original color, then nothing is impossible. You can simply mix different paints of the same brand. The second option is to add a suitable pigment to liquid rubber for a car.

We carry out retail and wholesale sales of products. It doesn't matter how much product you need. In any case, you can count on fast and high-quality service and professional advice. If you become our regular customer, you will be able to purchase goods much cheaper. Much more favorable prices are also available for bulk purchases.

You can pick up the goods from the warehouse yourself or order delivery. An order in Moscow can be delivered on the same day. If you buy a lot of cans, you can take advantage of a discount not only on liquid vinyl, but also on delivery. It doesn't matter where you are - in Moscow or any other region of Russia. In any case, you will receive our products within the specified time frame. You can find out more about the delivery conditions in the corresponding section of our resource by contacting us by phone or email.

Why is it better to order liquid rubber from our company?

• Here you can buy liquid rubber in any volume;
• We always have all existing shades in our assortment;
• Here you will find all the necessary equipment that will allow you to get started right away;
• You can always purchase liquid vinyl in a can at a competitive price;
• You do not have to come or look for transport for transportation. We organize everything ourselves;
• You will receive your order in a timely manner, allowing you to meet your deadlines;
• You can get detailed advice on any questions regarding products and our services.

Liquid rubber is sold in various containers. There are options in cans, buckets and canisters. Before ordering a product, you need to figure out which one will best suit the task. The choice depends on the volume required for work and the size of the surface to be painted.

Price question: how much will it cost to cover a car with liquid rubber?

The cost of the application material depends on the type of car. The cost of material for an ordinary passenger car rarely exceeds 8,000 rubles. The cost for crossovers and SUVs starts from 10,000 thousand rubles. Also, if you decide to use the services of car services, you will have to add the price for the services. The total cost of all work for a passenger car will be on average 10,000 rubles; for crossovers and SUVs the price will be much higher. Car repair shops also provide services for coating individual body elements. The cost of such services starts from 200 rubles. Below are comparative tables of consumption of liquid rubber concentrate and material in aerosol cans.

Liquid rubber in a can – convenient and fast.

When it is necessary to update individual parts of the car, there is no need to purchase large volumes of liquid vinyl. You don't even need a spray gun. It is much more advisable to use liquid vinyl, sold in spray cans. This option is usually used for painting wheels, grilles, and plastic interior elements. The technology is the same as when painting with a spray gun. The difference is that there is no need to prepare the material - diluting and mixing it. Liquid rubber in a can is sold ready-made. To start working with it, you just need to shake the can vigorously. It is recommended to keep rubber paint in a warm place so that the material is less thickened and distributed as evenly as possible.

What are the benefits of purchasing liquid vinyl in a can?

1. The price of a can of rubber is several times lower than the cost of a canister, so there is no need to overpay for unused material;
2. No special equipment is needed to apply paint;
3. The liquid rubber can is completely ready for use;
4. The canister is much easier to hold in your hand because it is lightweight;
5. It can be used anywhere, even outdoors, as long as there is no dust;
6. There is a huge variety of different shades on sale;
7. No special skills are required to operate the tool.

The spray can is really much more convenient. For example, when painting a disc, it makes it very easy to get to hard-to-reach areas. And the quality of work depends on this. Automotive rubber in cans allows you to apply paint at the right angle and paint without creating shagreen.

Advantages and disadvantages of coating

Liquid rubber, like any other material, has its advantages and disadvantages. Among the advantages it is worth noting the following.

1. After application, liquid rubber covers the surface with a continuous monolithic layer.
2. The material is applied by “cold” spraying (the surface and composition do not require heating).
3. Long service life and durability.
4. Waterproofing is resistant to sudden temperature changes in the range from -45 to +100 degrees Celsius.
5. Good interaction with other building materials,
6. The insulation has no seams, and the surface on which it is applied becomes waterproof.
7. Liquid rubber is resistant to ultraviolet exposure, mechanical damage and chemicals.
8. To treat one square meter of surface, only 1 - 2 kilograms of the substance will be required, and there is no need for fire or electricity.
9. Leaves no odor.
10. The material is highly elastic.
11. The material is environmentally friendly and corrosion resistant.
12. The material is applied to any plane (horizontal, vertical, etc.) and hard-to-reach surfaces of the car.
13. Liquid rubber is a unique design solution for a car, since it provides for painting the body in different colors.
14. Liquid rubber also has sound-proofing properties, so it is often used on wheel arches and the underbody of a car. This treatment can significantly reduce the noise level in the cabin and additionally protects the underbody from corrosion (read also what Movil for cars is and how it helps against rust).

Liquid rubber for cars in buckets - savings and unique color.

If we are talking about completely painting a car with liquid rubber, using spray cans will not work. This is not only inconvenient, but also completely unprofitable. Large-scale work requires a significant amount of liquid vinyl, the use of special equipment and a prepared room. To complete this task you will need several buckets or cans of rubber. The price per liter of material in a large container is not comparable to the cost of the same volume in cans.

A strong argument in favor of choosing liquid rubber in buckets is the ability to obtain a unique shade using various pigments. Skillfully and tastefully selected liquid rubber for your car will help make the design unique, one of a kind. You can combine different paints and add all kinds of fillers. Your creativity is not limited here. And this is a special advantage of vinyl in buckets over spray cans, which are filled with a ready-made product of a certain color.

In addition, high-quality coverage of large surfaces can only be achieved using a spray gun, which ensures continuous and uniform application of vinyl. And this is the main task when painting a car.

Would you like to receive additional information about the selection and rules of working with the material? Just call and ask our specialists your question.

Types of liquid rubber

There are both matte and glossy Plasti Dip. Products with metallic, chameleon, neon, and mother-of-pearl coating effects are in great demand. In addition, there are transparent and thermal (changes color with changes in ambient and body temperature) rubber paints. Despite the fact that the color range is not particularly diverse, by mixing those available, you can get the most incredible shades.

On the domestic market you can purchase coloring compositions of the following brands:

• Plasti Dip (manufacturer - USA);
• Rubber Paint (joint production of Russia and China);
• Dip Team (manufactured in Russia).

There is both matte and glossy Plasti Dip

Liquid rubber is produced both in aerosol cans (enough for painting a small number of elements, for example, wheel rims) and in cans (for painting with a spray gun).