Review of Lukoil 5w40 lubricant: characteristics, properties, pros and cons

Motor oils for power units of domestic manufacturers are always under close attention. Not only specialists, but also Russian motorists who want to purchase inexpensive, high-quality fluids for their cars.

If we talk only about popular lubricants, you should pay attention to the technical characteristics of Lukoil Super 10W-40 semi-synthetic oil. At the moment, this product is one of the most popular products sold by the plant. Practice shows that products with this marking are in demand throughout the post-Soviet space.

Description

Lukoil Super 10W-40 motor fluid is an all-season lubricant created on a semi-synthetic basis. It contains only high-quality components, and is based on the proven developments of domestic scientists over the years.

The oil is famous for its high resistance to oxidation and the influence of high and low ambient temperatures. The addition of cleaning additives allows you to create impeccable cleanliness and order inside the engine. Breaking down soot deposits formed during previous operation. And the ability to disperse allows you to retain these dissolved particles for as long as possible. Throughout the entire replacement interval, preventing them from settling and clogging valves and filters.

The substance creates a persistent, strong oil film on the surface of parts, protecting the engine from wear. It confidently copes both during increased loads and high speeds, and during start-up, when the motor is especially vulnerable and sensitive to damage.

In addition, it is worth noting the economical consumption of this product, as well as its ability to reduce noise and vibration that occurs during engine operation.

The material has high lubricity, stable viscosity and pressure, and fast pumping. Thanks to its excellent fluidity, the motor starts without any problems even in sub-zero temperatures, and the operating pressure inside the motor is built up in a matter of seconds.

ALL-SEASON HYDRAULIC OIL LUKOIL VMGZ

LUKOIL VMGZ multi-grade hydraulic oil is produced on the basis of a low-viscosity, low-solidification base oil with a composition of additives that provide the necessary viscosity, antioxidant, anti-wear, anti-corrosion, low-temperature and anti-foam properties.

The use of LUKOIL VMGZ hydraulic oil can significantly expand the geographical area of ​​reliable operation of machines, ensure the start-up of hydraulic drives at low temperatures without preheating and round-the-clock operation of machines with hydraulic drives in the northern and north-eastern regions without seasonal changes in the working fluid.

APPLICATION AREA

LUKOIL VMGZ is intended for all-season operation in hydraulic drives and hydraulic systems of construction, road, logging, lifting and transport and other machines, in industrial equipment in the regions of the Far North, Siberia and the Far East, working outdoors, as well as as a seasonal winter variety in areas of temperate climate in the temperature range from -40 to +50 °C, depending on the type of hydraulic pump used.

ADVANTAGES

  • Wide operating temperature range
  • Excellent anti-wear properties
  • Completely protected against corrosion
  • Excellent high temperature stability
  • High resistance to mechanical destruction
  • Excellent filterability
  • Easily separates from water
  • Compatible with rubber products of hydraulic systems.

The product is manufactured according to the standard: TU 38.101479-00 (with changes 1-2)

Applicability: for which engines and cars

The scope of application of Lukoil Super 10W40 motor fluid is quite wide. Since the oil is all-season, it can be used at any time of the year. As for the purpose for specific cars, there is none. Motor oil is ideal for use in both gasoline and diesel power units.

Primarily focused on domestically produced vehicles. In particular, it has special approval from the UMP plant and can also be used in ZMZ and AvtoVAZ cars.

It copes with its tasks both when driving outside the city, on the highway and off-road, and in the city - in start-stop mode. This mode, with frequent stops and subsequent movement at intersections, traffic lights, and traffic jams, wears out the engine especially badly. Semi-synthetic Lukoil Super can minimize risks.

Which car manufacturers recommend and use:

  • AVTOVAZ
  • GAS
  • ZAZ
  • LADA
  • UAZ
  • and many others.

Suitable for use under conditions of high loads, including temperatures, in off-road conditions and climatic tests, it is not afraid of high power and maximum speed.

Price

An important factor that influenced the popularity of the presented product among domestic car enthusiasts was the price of Lukoil oil. Thanks to the location of the company's production facilities in the Russian Federation, it was possible to significantly reduce the cost of the product.

The lubricant on the market costs significantly less than its analogues. The quality of the lubricant remains high. Only 10% of the cost depends on foreign-made components.

The price of Lukoil oil of the Super series is about 170-185 rubles. for 1 l. A 4 liter canister sells for 550-700 rubles. This cost allows the oil to compete with world leaders in the production of consumables for engines in our country.

Specifications

All the most important technical characteristics are presented in the table, from which you can determine how suitable the oil is for your needs.

Indicator nameLukoil Super 10W-40
Country of OriginRussia
For which carscars; SUVs; minibuses; light trucks
engine's typepetrol; diesel
Type of oilsemi-synthetic
Viscosity SAE10W40
Kinematic viscosity at 100°С, mm2/s13,9
Kinematic viscosity at 40°С, mm2/s88,3
Density at 15°C, g/cm30,878
Viscosity index158
Flash point, °C224
Pour point, °C-36,0
Sulfate ash content, wt.%1,1
Base number, mg KOH/g8,4
Dynamic viscosity (CCS) at -30°С, mPa s5463
Dynamic viscosity (MRV) at -35°С, mPa s35900
Evaporation according to the Noack method, %11,8

Specifications, approvals and approvals

Complies with modern tolerances and has approvals for use in cars:

  • API: SG/CD;
  • AVTOVAZ: LADA cars;
  • OJSC "UMZ";
  • JSC "ZMZ"

Articles and packaging options

Knowing the correct article number, you can quickly find the right product in your favorite online store.

PackageVolumeArticles, order codes Lukoil Super 10W40
Canister1l19191
4l19192
5l19193
18l135663
Barrel50l14912
216.5l14913

Explanation of the SAE 10w-40 marking

The SAE J300 marking is a generally accepted global classification of viscosity-temperature properties for motor oils. The designation of the so-called all-season characteristics is written in the form of 2 numbers separated by a dash.

The first number, supplemented by the English letter W, indicates low-temperature characteristics. The second number corresponds to high-temperature ones; in our case, the marking looks like 10W-40. In the figure you can see the permissible temperatures at which the oil will operate effectively and safely for the engine.

The low temperature or winter value, in our case 10W, is obtained as a result of 2 dynamic viscosity tests. The first test for the minimum temperature of cranking the crankshaft with the starter, for us it is -20°C. The second test is for the maximum temperature at which the oil pump can pump oil during a cold start. It should be 10 degrees lower than the first, that is -30°C.

With a high-temperature or summer value, for us it is 40, everything is much simpler, and in order not to go deeper, we’ll just write it. The value equals the permissible temperature at which the oil will be effective.

Based on the above, if the oil is labeled 10W-40, it is safe to start the engine down to -20°C. Down to -30°C, the engine can still be started, but with increased wear and tear on its components. Well, in the summer, at temperatures above 40°C, there will also be increased wear, since the oil will become too liquid. But manufacturers can improve these parameters, since these are the minimum acceptable parameters.

User Experience

Most often, these products are used by owners of domestic cars. It is inexpensive, has optimal characteristics, and is available in any auto store (more than 88% of manufactured goods are supplied to the domestic market). Drivers confirm the manufacturer's claims about the quality of its products.

Lukoil 5W30 oil is synthetic. Often used by Ford owners - it fully complies with three manufacturer requirements: WSS-M2C913-A, WSS-M2C913-B, WSSM2C913-C.

It is important to understand that any fuel and lubricants are not eternal. Even high-quality synthetic composition becomes dirty, oxidizes, and ages. Therefore, the main rule for using motor oils is their timely replacement in accordance with the recommendations of the car manufacturer.

How is it different from competitors

Lukoil Super 10W-40 motor fluid has a number of advantages compared to other semi-synthetic and mineral oils, as well as analogues of other brands:

  1. High level of oxidation stability;
  2. Versatility - an all-season product that, if desired, can be poured into all types of cars;
  3. Excellent dispersing abilities;
  4. Thanks to its enhanced antioxidant properties, it prevents the appearance of deposits on engine parts and walls;
  5. Easy start of a cold engine in cold weather;
  6. Reduced engine wear during startup;
  7. Economical consumption;
  8. Reduced noise and vibration during engine operation;
  9. Ability to work under increased loads;
  10. Suitable for city driving.

The main disadvantage of this product is starting the engine in cold weather. Most motorists say that oil loses its fluidity already at -18°C. However, technical tests and laboratory analysis confirm that the pour point is at -36°C. And it should easily withstand the frosts of the middle zone.

Car owners do not name any other shortcomings of the product. From the point of view of physical and chemical properties, many agree with the opinion of the manufacturer. Lukoil Super 10w-40 semi-synthetic motor fluid perfectly cleans the engine and shows exceptional resistance to oxidation.

ZINC-FREE HYDRAULIC OIL LUKOIL GEYSER CF

LUKOIL GEYSER CF is a series of ultra-pure extra-class hydraulic oils with improved anti-wear properties for hydraulic systems for industrial and transport purposes.

For the production of LUKOIL GEYSER CF series oils, new generation additives are used that do not contain zinc and chlorine. Thanks to modern technology, oils have excellent performance characteristics; they are able to work with ultrafiltration systems with a purification fineness of 1-5 microns.

Ensure reliable and efficient operation of hydraulic systems, components and mechanisms operating in harsh operating conditions.

APPROVALS

  • Denison HF-0, HF-1, HF-2
  • Cincinnati machine P-68/69/70

ADVANTAGES

  • DIN 51524 p.1,2 (HLP)
  • Vickers I-286-S, M-2950-S
  • Bosch Rexroth 90220

The product is manufactured according to the standard: TU 0253-012-79345251-2008 (with changes 1-2)

How to spot a fake

Products of well-known brands are often counterfeited, mainly in the highest price category. But there are frequent cases of counterfeit products in the middle price segment. Therefore, before going to the store, you should know about the verification method provided by the manufacturer. Knowing it, you can easily distinguish the original Lukoil Super 10W-40 from a fake.

The manufacturer has provided protective elements on the front and back sides of the canister, as well as special markings on the bottom, which provide additional protection:

  1. The label is protected from direct sunlight and moisture, as it is specially fused into the surface of the canister;
  2. Thermal marking is made with a special laser in two rows, on the back of the canister, under the barcode;
  3. Double lid made of special plastic, eliminates reuse, thanks to the aluminum insert and warranty ring;
  4. Additional protection against counterfeiting in the form of foil on the neck. Which will also prevent oil from spilling if accidentally tipped over;
  5. The canister itself is made of three-layer, high-quality plastic using modern equipment, which is difficult to counterfeit.

  6. Ecological designations provide information about the need to hand over containers for subsequent recycling. Moreover, it uses plastic that is intended for reuse;
  7. Material used in manufacturing;
  8. Canister production date, including year and month;
  9. Trademark of the Lukoil company;
  10. Blow molding machine mold number.

More information about laser marking:

  1. The left number in the top row indicates the date of manufacture of the oil;
  2. The right digit in the top row indicates the batch number;
  3. The bottom row is the individual canister number, consisting of 10 digits. The first 2, separate ones, indicate the year of manufacture.

Consumer Reviews

The attitude of car enthusiasts towards this product is generally not bad, but opinions, of course, differ. Some are completely satisfied with the performance of the engine, while others, on the contrary, complain about it.

But the factor where the product was purchased is also important, because if you buy oil on the market or from your hands, no one is safe from counterfeiting. Therefore, you should only purchase oil in special stores.

Lux 10w40 brand oil received the best reviews, compared to other brands from this company. Standard oil is perhaps the second most popular, but consumers recommend using it in domestic cars.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]