Tires for Chevrolet Aveo - acceptable sizes, TOP 5 winter tires for the 2020 season

Tags:Chevrolet CruzeTire pressureTires and Wheels of a car
If you have a car, you should take care of its high-quality and durable operation, in particular, check what pressure is in its wheels. For Chevrolet Cruze, Captiva, Lanos or Lacetti, this question is also relevant.

Checking the inflation level of car tires allows you to:

• reduce the amount of carbon dioxide released into the environment when driving;
• save a considerable amount of fuel;
• save tires from rapid wear;
• ensure safety while driving.

Standard tire pressure for Chevrolet Captiva

Accordingly, if you do not take into account the condition of the tires on your Chevrolet Captiva, Aveo or Cruz, you risk spending more on fuel and buying tires more often. Incorrect tire pressure can cause rapid deformation and puncture.

It is for these reasons that you need to make it a habit to check the condition of your car's wheels at least once every 30 days. Such simple measures will make you save money while taking care of your health and life.

Checking indicators

To check if the tire pressure on your Chevrolet Captiva or Lanos is correct, you need:

• mechanical pump or compressor;
• pressure gauge

It is better to take these devices for a long time and spare no expense on them - you will perform a similar procedure quite often.

Compressor with pressure gauge for inflating tires

It is better to take measurements on cooled tires (after driving up to 2 km). This will allow you to get the most accurate data, because the rubber will not have time to heat up the air.

You will also need to arm yourself with instructions, where “Aveo” indicates the standard pressure value.

There are basic rules for setting this standard value:

• the heavier your car, the higher the pressure should be;
• Different indicators may be observed in the wheels at the back and front - this is normal.

You will have to take this information as a basis and rely exclusively on it - before the Aveo or Lacetti goes into mass production, the plant undergoes thorough testing of the characteristics of the car with different tire inflation rates, which guarantees the provision of accurate data that ensures the most comfortable ride.

Standard tire pressure for Chevrolet Lacetti

After you have looked at the normal value, you can proceed directly to measuring a similar indicator in the Aveo, Cruz or other Chevrolet model. Follow these steps:

• Unscrew the cap from the tire valve. It is easy to find, since it is located on the surface of the rim and is easily identified during inspection;
• Use a pressure gauge to measure the tire pressure. During measurement, air should not “poison”, as this contributes to the inaccuracy of the data obtained. When using an electronic type pressure gauge, read its instructions;
• compare whether the obtained values ​​meet the standard. If they are not equal to each other, then you will need to either pump up or deflate the tires. In order for the air to escape, you need to press the valve. After completing the measurements, tightly screw the cap located on the nipple - it will protect the product from dirt.

Standard tire pressure for Chevrolet Cruze

As for the standard tire inflation value for Cruz, the manufacturer indicates in the instructions that the optimal value is 2.2 atm. However, for fuel saving mode, it is more rational to use inflating the tires to 2.7 atm.

Among the advantages of the specified value (2.2 atm), drivers indicate the softness of the car when driving. The pumping mode to 2.7 atm is criticized by many, despite its economy, since the car becomes like a “jumper”, which, of course, softens the blow in an accident, but is not very convenient in everyday life.

In this regard, many drivers of the model pump up tires to 2.4 atm.

Standard tire pressure in Chevrolet Aveo

Also, the manual for the car model states that the indicators should be the same on the rear and front tires.

If we compare the indicators of this model with, for example, “Aveo” or “Lanos”, then for “Aveo” this indicator differs depending on the year of manufacture and ranges from 2.1 to 2.5, and the situation is similar to Cruze - normal indicators for tires are 2.2 atm.

Standard tire pressure for Chevrolet Lanos

Recommendations

Follow these tips to extend the life of your wheels:

• take measurements before riding, especially over long distances;
• do not check the wheels after a long drive or a long stay under the scorching sun - heated air distorts the readings;
• If you exceed the optimal value specified in the car manual, you can reduce fuel consumption and gain better control over the vehicle. Try several pumping modes;
• if you exceed the maximum specified pressure, it will not lead to anything good;
• Do not take measurements without a special device, “by eye”. Only a pressure gauge can give accurate results;
• If you drive a long distance in a Lacetti or Captiva, or carry heavy loads in a Captiva, inflate the tires to provide a compensating effect.

Source: https://okuzove.ru/poleznye-stati/davlenie-v-kolesax-avtomobilya-chevrolet.html

Answers (3)

As the manufacturer recommends, the pressure in the tires R13, R14, R15 and R16 of the first and second generation Aveo models should be 2.1 bar, both on the front and rear wheels.
This is optimal, some download it to 2.0 and that’s fine too. But less or more is no longer worth it, otherwise the tires will wear out faster.

On T300 models, the recommended pressure is 2.4 bar, not to be confused with the T200 and T250 models. There are already different wheels.

If you have a car, you should take care of its high-quality and durable operation, in particular, check what pressure is in its wheels. For Chevrolet Cruze, Captiva, Lanos or Lacetti, this question is also relevant.

Checking the inflation level of car tires allows you to:

• reduce the amount of carbon dioxide released into the environment when driving;
• save a considerable amount of fuel;
• save tires from rapid wear;
• ensure safety while driving.

Standard pressure in Chevrolet Captiva tires
Accordingly, if you do not take into account the condition of the tires on a Chevrolet Captiva, Aveo or Cruz, you risk spending more on fuel and buying tires more often. Incorrect tire pressure can cause rapid deformation and puncture.

It is for these reasons that you need to make it a habit to check the condition of your car's wheels at least once every 30 days. Such simple measures will make you save money while taking care of your health and life.

Winter and summer Niva tire pressure parameters

Insufficient or excessive tire pressure threatens premature failure of the chassis, the tires themselves, excess fuel consumption, and most importantly, traffic safety.

To test it, tapping with a shoe is not enough, as shown in old films.

Visual inspection of clivus deformations is also not a sufficient assessment criterion, although it serves as a signal to doubt the correctness of pumping.

Niva car

Instruments for checking the degree of pumping

For cars such as the Chevrolet Niva, maintaining this parameter is especially important. The center of gravity of this car is high, and the car cannot be called stable, especially during emergency maneuvers. It is impossible to measure the degree of air compression in a tire without special measuring instruments.

Mechanical pressure gauge

Pressure gauges are used for these purposes. They are divided into two categories that differ structurally:

1. Mechanical pressure gauge. A device for measuring tire pressure, having a mechanical drive and a dial indicator. Has a significant degree of error, long service life, does not require a power source.
2. Electronic pressure gauge. Electronic type device with a screen for displaying measurement data. It is powered by an internal power source; when used correctly, the error tends to zero.

Important: The error of devices of the first type is greater in winter than in summer due to temperature deformations of mechanical parts. In cold weather, it is recommended to use only to get to the garage or service station. The disadvantage of electronic pressure gauges is that the battery can run out at the most inopportune moment.

Electronic pressure gauge for car tires

Frequency of measurements on Chevrolet Niva

In order not to endanger your life and the lives of others, you need to check the tire pressure before each trip, especially over long distances. The sequence of actions is as follows:

1. We check the readings using a pressure gauge as indicated in the instructions for it. Tires should not be warm. The car must sit for three hours.
2. We compare the readings with the data in the table of permissible tire pressure for the Niva 21214 car.
3. After 30-40 minutes, we repeat the measurement, and if the readings become low, it means there is a puncture. Keeping the data at the same level indicates that you can leave.

Recommendation: After the end of the trip, another measurement is taken 2.5-3 hours later. This requirement is optional. However, when you drive the next day, you won't be surprised by a flat tire. All wheels are checked, including the spare.

Tire Niva

What pressure should Niva tires have?

To always know what pressure gauge readings are considered normal, print out a table of acceptable readings and carry it in the glove compartment (if the metal plate on the car body is missing or has become unusable), and the pressure gauge in the trunk. In the cold season, the road surface is slippery and the tires are less elastic. Therefore, in winter, tire pressure should be lower than in summer. The permissible run-up is 0.2-0.3 bar.

We store tires correctly: how to preserve tires for the next season?

Tires should be stored indoors with adequate ventilation away from heat. The permissible temperature conditions at which the product maintains quality varies from -30 to +35 degrees; when it goes beyond comfort, rubber begins to lose its technological characteristics. Tires also need to be protected from ultraviolet rays, moisture and condensation, which contribute to cracking of pores and a decrease in the elasticity of the product. It is necessary to store rubber:

1. At a distance of 1 m from heating elements and direct sunlight;
2. In a vertical position on disks, and in a horizontal position - without structural support;
3. On a flat, non-embossed surface;
4. Away from sources of vibration and temperature changes;
5. Packaged or placed in specialized containers.

It is not advisable to store rubber outdoors for a long time, as this leads to hardening of the outer part of the rubber and delamination of the inner part when the physical characteristics of the atmosphere change: temperature, humidity, wind speed. Also, when storing tires, it is recommended to rotate and turn over from time to time to evenly distribute the static load - the rubber should not be pressed under its own weight.

Storing any type of rubber in this position is unacceptable: the rubber will stretch under the influence of gravity, constantly deforming and losing its technical characteristics. Operating a car on a stretched tire can cause the rubber to fly off the rim at speed, which will negatively affect the entire chassis of the vehicle.

A responsible attitude to the choice of tires for the Chevrolet Cruze will guarantee the safe operation of the vehicle, as well as reduce the wear rate of all vehicle components. High-quality tires, with proper care, will last a couple of hundred thousand kilometers, allowing you to save on car servicing, as well as giving the car comfort and obedience when driving. Greed and neglect of careful choice of tires is a direct saving on your life!

Search form by car model, tire or wheel size Select the tab below to search by car or vice versa: to search for a car by specified criteria

Search by car make, year and model

Search by tire size

Search by tire size

Search by disk size

• home
• Car brands
• Chevrolet
• Wheel and rim sizes for Chevrolet Cruze

Read more: Citroen Berlingo or Peugeot Partner

Tire pressure of Niva Chevrolet according to the passport

The importance of maintaining the correct pressure in Chevrolet Niva tires is one of the most underestimated parameters by car owners. This is important because the pressure maintains a range of performance characteristics:

• car control stability;
• ride stability;
• braking distance within the design;
• specified trajectory of movement;
• uniform wear of the treadmill, due to which the service life of the tires is maintained at the proper level;
• integrity of the side surfaces;
• volumes of fuel consumption not higher than those specified in production.

The Niva manufacturer recommends that the pressure on both the front and rear axles reach 1.9 bar. The recommendation applies to the sizes of 15-inch tubeless tires 205/70, 205/75 and 16-inch 215/65.

In the case of off-road driving, factory recommendations allow the indicator to be reduced to one and a half bar. In some cases, car owners themselves increase the pressure to 2 or 2.2 bar for driving on the highway. The manufacturer indicates that pressure above two makes the ride harsher and less comfortable.

Methods and frequency of measuring air pressure in Chevrolet Niva tires

Tire pressure is measured using special devices and at specified intervals. The main measuring device is a pressure gauge. There are two categories of this device:

1. mechanical;
2. electronic.

The first ones are distinguished by the fact that they have a mechanical drive in combination with a dial indicator. The disadvantage is the rather high level of error, which increases in the cold season. This is due to temperature deformation.

In connection with this, mechanical pressure gauges are used in the cold only as an aid until the opportunity to visit a service station arises.

But this disadvantage is offset by the long service life and the absence of the need for a power source.

The second category of devices is powered by a battery that is charged through a network connection. The main drawback is the ability of the battery to die at the most inopportune moment. Thanks to a more complex device, such a pressure gauge has minimal error.

The data is displayed on a screen similar to the display of other electronic devices.

Checking tire pressure before each long trip is a mandatory step to ensure the safe operation of the vehicle.

Do the necessary actions in a certain sequence:

• let the car sit for at least three hours;
• check that the tires are cold;
• connect the pressure gauge and take measurements as indicated in the instructions for it;
• check the result with the table of acceptable values;
• recheck the data after a half-hour pause.

Evidence of a puncture will be a decrease in readings between two measurements. The absence of any changes indicates that the situation is normal.

Experts recommend checking the pressure after driving. This must be done two and a half or three hours after stopping. Thanks to this additional measurement, you can eliminate the possibility of a puncture formed during the trip. It is necessary to measure data not only on the installed tires, but also on the one that is used as a spare.

What pressure should be in the tires of a Niva Chevrolet car?

Normal pressure indicators for tires installed on a Chevrolet Niva crossover depend on their size, weather conditions and type of road surface.

On the body of many stock vehicles you can find special metal plates that indicate normal pressure data. But, if you don’t have it, then you should print out such a table and take it with you.

A pressure gauge is a must in the trunk of every car owner.

The main differences for tires of the same size are related to the time of year when they are used. So, in winter the surface of the trails is often quite slippery. At the same time, the elasticity of the rubber increases.

This results in a pressure reduction of 0.2 or 0.3 bar being allowed.

Lower tire pressures allow you to increase the contact patch between the tire and the road, which has a positive effect on the quality of grip.

Tire pressures are lower than recommended in case of extreme off-road conditions or if the car is stuck in the snow. In the second case, a decrease is permissible up to 1.2 atmospheres.

Thanks to such a low injection, it will be easier for the Chevy to drive onto hard surfaces, but as soon as this happens, the pressure must be brought up to normal for this time of year.

If the car is stuck off-road, then for mud tires, when setting the required pressure level, tread wear is also taken into account.

These recommendations work for all tire sizes, including the most popular 205/75/R15, 205/70/R15 and 215/65/R16

Tire pressure table for Chevrolet Niva in winter and summer

It is mandatory to regulate the pressure of all cars that have stood motionless for more than half an hour in the summer or a quarter of an hour in winter conditions.

In the latter case, the frequency is also affected by the thermometer reading - the lower it is, the more often the check is necessary. Heating the air for every eight degrees adds 0.1 atmosphere to the required pressure.

Table of recommended pressures for tires with the most common diameter p15, as well as other sizes:

Road conditions significantly affect the permissible deviations from the recommended pressure indicated in the table for various tire radii.

So, if the Niva Chevy is driving through mud or loose snow, then the optimal solution would be to reduce it to 1.2-1.5 atmospheres. But it is worth considering that such a low pressure at the wheel can lead to its disassembly.

Therefore, the ride should be relatively smooth, without sudden jerks.

The appropriate value for ice is 1.7 atmospheres, while on dry asphalt in good weather they often drive at 2 atmospheres. But an increase in the indicator can lead to discomfort. It is justified if you have to drive on a surface strewn with stones - in this case, an indicator of two and a half bars may be suitable.

All-season tires

Designed for use in all weather conditions, it is important to consider that different conditions require different pressures. Initially, the atmosphere indicators in such tires correspond to the average recommended ones. At the same time, the car owner is required to regularly ensure that the pressure level is suitable for operating conditions.

What to pay attention to when inflating tires

Inflating tires or checking the pressure is not particularly difficult and even a beginner or a woman can cope with this task. First, you should look at the recommended parameters and determine the optimal values. Then you need to equip yourself with a pressure gauge and pump. You can start working.

Experienced drivers shared small but very important secrets.

• In the summer, you should start checking the tire pressure and inflating it after the tires have completely cooled down after the trip. It is better to perform the procedure early in the morning or in the evening.
• In winter, it is difficult to do without a warm garage, where the car should sit for at least two hours.
• It is better to measure pressure repeatedly with a break of 3-5 minutes.

These tips will help you achieve great results and keep your car safe and reliable.

What is the tire pressure in a Niva Chevrolet car?

This article will help novice drivers understand what tire pressure should be in the tires of a Chevrolet Niva.

How to measure tire pressure correctly

Incorrect tire performance can lead to disruption of the entire chassis, which will subsequently be costly and problematic to replace. That is why it is important to know what pressure is in the wheels and adjust it if necessary. Note that this problem cannot be solved without special instruments. Outwardly, you can only notice deformations, if any, which are caused by incorrect pressure. So, you can measure this indicator on a Chevrolet Niva car using a pressure gauge.

Where is the Chevrolet Niva clutch master cylinder located?

There are two types of this device:

• mechanical;
• electronic.

Of course, mechanical ones are not as accurate as electronic ones. The error may be 0.05 bar. Today, electronic pressure gauges are considered the most accurate tire air meters. Both in summer and winter, using such devices you can more or less accurately measure pressure.

It is advisable to do this once a month if the car is used regularly. Once every two months is enough in case of rare use of the vehicle.

Chevrolet Niva cross-axle differential lock

Features of tire inflation in winter

The adhesion spot in winter should be larger than in summer. That is why the tire pressure should be reduced. The larger the grip area, the less likely it is to have an accident on a slippery road. For the accuracy of the indicators, it is necessary to take these indicators correctly. This is done as follows:

1. First you need to check that the tires are not warmed up.
2. Three hours before taking measurements, you should not use the car for its intended purpose.
3. Measurements must be taken on all four wheels of the vehicle.

Only if the correct conditions are met can we assume that the tire pressure in a Chevrolet Niva is determined correctly. Of course, all owners of this brand are interested in the exact air coefficient in their tires. You need to know that the Chevrolet Niva with different tires has excellent measurements, namely:

• A Chevrolet Niva with 205/75 R15 wheels has a pressure in the front wheels of 2.1/30 atm./psi. The rear tires should have the same data;

Source: https://ladaautos.ru/niva/kakoe-davlenie-v-shinax-v-avtomobile-niva-shevrole.html

Causes of pressure drop

If you have a car, you should take care of its high-quality and durable operation, in particular, check what pressure is in its wheels. For the Chevrolet Cruze and Lacetti, this question is also relevant.

Checking the inflation level of car tires allows you to:

• reduce the amount of carbon dioxide released into the environment when driving;
• save a considerable amount of fuel;
• save tires from rapid wear;
• ensure safety while driving.

Accordingly, if you do not take into account the condition of the tires on the Lacetti, then motorists risk spending more on fuel and buying tires more often. Incorrect tire pressure can cause rapid deformation and puncture.

Why is it worth regularly checking the tire pressure in your Chevrolet Niva and how does it affect safety?

The pressure standard is determined by the manufacturer. Deviation from which significantly affects the quality and safety of movement in a car.

Why is it necessary to control?

Reduced or increased air content leads to a change in the contact surface of the tires with the road surface. This leads to various consequences.

For high blood pressure:

• road grip decreases
• road stability decreases
• tire tread wears off unevenly, more in the middle
• the shock-absorbing properties of the wheel are reduced

• 
  the risk of damaging the tires when falling into a hole increases

• braking distance increases

At low pressure:

• increased contact area with asphalt
• fuel consumption increases
• the tread wears out faster and unevenly, more at the edges
• car control deteriorates
• decreased stability when turning and changing lanes at high speed
• the chance of tire and rim damage increases when a wheel falls into a hole

The greatest danger comes from different pressures in all wheels. While driving, the vehicle “steers” towards the wheel with the lowest value.

Measuring devices

A pressure gauge is used to measure tire pressure.

There are three types of pressure gauges:

• mechanical;
• switches;
• electronic.

A mechanical pressure gauge is more reliable. It is based on a cylindrical spring. However, this pressure gauge shows the greatest measurement errors.

An electronic pressure gauge has the greatest accuracy. True, very cheap devices lack this quality. Like any electronics, it is less reliable compared to its mechanical counterparts.

Important . The check is carried out on cold wheels. This means that the machine must be left at rest for at least 3 hours.

Check frequency

Often the driver remembers the tire pressure only 2 times a year - when changing tires at a tire shop before the next summer or winter season.

However, the wheel is not a completely sealed device and over time, depending on the degree of wear of the rubber, air may escape. Ideally, you should check the amount of air before each trip. But the most optimal control mode would be to check once every 2-3 weeks and before long trips.

In spring and autumn, when sudden temperature changes are possible, it is better to check more often. When the temperature changes by 10˚C, the air pressure changes by at least 0.1 bar.

Table of standards for various tires

Attention! The pressure in the rear tires should be approximately 0.3 - 0.5 bar higher if you plan to carry a heavy load.

In winter, you can slightly reduce the amount of air to increase the tire contact area with the road.

So, dear car enthusiasts, do not forget to regularly check the tire pressure, because the safety of you and your loved ones depends on it.

Interesting video about the effect of tire pressure on cross-country ability:

Source: https://nivaexpert.ru/shiny-i-diski/davlenie-v-shinah-niva-shevrole/

Used tires - is there a right to life?

Many motorists prefer to purchase used tires, which allows them to significantly save on re-shoeing a vehicle - prices can reach up to half the cost of a new tire at a dealership.

Read more: How to paint a light bulb blue

The use of bur rubber is allowed, but it is important to determine the degree of wear of the tire: insufficient tread depth or exposed cord is a sign of complete unsuitability of the tire. Also, models with visible rubber tears, the presence of “bumps” on the surface of the product, or uneven wear of the coating are not allowed for use.

You should consider the possibility of purchasing a fake or low-quality cut tire - bias slopes are often restored by vulcanizing the rubber and cutting fresh tread onto an old slope with a whole cord. When choosing recycled tires, you should pay attention to the presence of a quality stamp and cutting procedure on the surface of the tire, otherwise the retreading was carried out in artisanal conditions and the product is not suitable for use.

It is important to know! By order of the traffic police, it is allowed to install secondary tires on the rear axle of passenger cars if there are no visible damages and uniform coverage, as well as sufficient tread depth; on the front axle - only primary tires.

Tire pressure in Chevrolet Cruze: photo

The pressure in the Chevrolet Cruze tires, as in other cars, greatly affects not only handling, but also tire wear, the life of chassis components and fuel consumption. Constant and accurate pressure monitoring will save you from many troubles, and it is advisable to carry it out at least once a week. We will consider all the subtleties of this issue today.

What is the optimal tire pressure for a Chevrolet Cruze?

The Chevrolet Cruze can be equipped with several types of tires - 15, 16 or 17 inches with sizes 205/60, 215/50, 205/65 or 225/50.

2.2 bar is the optimal pressure.

Regardless of tire and engine size, vehicle modification and body type, it is recommended to keep the standard tire pressure in the Chevrolet Cruze within 220 kPa (2.2 bar) or 32 pounds per square inch (psi). This applies to both the front and rear wheels of the car.

You need to remember that the pressure is checked only on cold tires, since when heated, the pressure gauge readings will be higher by about 0.2 bar.

The spare tire must be maintained at the same pressure as the standard tires.

The pressure in the spare full-size wheel should be kept within the same limits, and the pressure in the temporary spare tire should be maintained at 420 kPa (4.2 bar) or 61 pounds per square inch (psi).

In order not to get confused in different pressure designation standards, below is a table that makes it easy to adapt the required pressure to the designations on the scale of the pump, pressure gauge or compressor.

Converting pressure parameters into different units.

Nevertheless, there are cases when it is possible and necessary to deviate from the standards specified by the manufacturer.

When are tire pressure deviations acceptable?

The Chevrolet Cruze user manual indicates that minimum fuel consumption is achieved at a pressure of 270 kPa, but it must be taken into account that the car will become much stiffer and the load on the suspension elements will be slightly higher.

And besides this, if the pressure is too high and the tires are used for a long time, uneven tire wear may occur - the middle part of the tread will wear out much more intensively . It makes sense to maintain such pressure only when driving on the highway at high speed, and in the city and on bad roads, of course, you need to adhere to the ratings specified by the manufacturer.

When to increase tire pressure?

Tire pressure must be increased when the vehicle is loaded.

Another indication for increased pressure is loading the car.

The plant allows an increase in pressure to save fuel on a good road only when there are no more than 3 passengers in the cabin, but at maximum load (five passengers plus full luggage), the pressure in the front and rear wheels should be at 220 kPa.

Video about choosing tire pressure for a car

Advice to car owners: what can be learned from the tire markings

Tire manufacturers place many identification marks on the tire sidewalls depicting detailed characteristics of the tire. There are many signs, and each manufacturer sets different kinds of factors, but most of them have the same meaning. What may be indicated on the label?

1. Tire manufacturer.

3. 205/60/R16 – tire size designation. For example, the factory setting on a Chevrolet Cruze is (wheel) size 16. The first 3 digits, in this case 205, indicate the tread width in millimeters, measured between the outer sides of the tire. The next 2 digits - 60 - mean the height of the tire profile, which is expressed as a percentage. R16 is the average diameter of the hole in the tire in which the wheel is mounted. The value is measured in inches, the additional marking R indicates a radial tire.

4. Designation of the tire's load-bearing capacity index, expressed using the international index LI (Load Index).

6. The direction of rolling of the tire, used for its correct installation, etc. In total, about 16 symbols can be read on the tire.

Read more: Velcro riding in winter

Car tires are soft rubber with a tread pattern that provides sufficient grip for vehicle movement, as well as protecting the rim and wheel chamber from the pressure of the vehicle's weight.

Select Chevrolet Cruze modification

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source razboltovka.ru

The Chevrolet Cruze is a mid-size passenger car produced by the Korean subsidiary of General Motors. Cruze was first introduced in 2008 as a successor to the popular Daewoo Nubira in Poland. The Opel Astra became the basis for the new car. The stylists have given this car a very nice body line. The front of the car received a typical body for the new Chevrolet line, the grille is divided into two parts. Futuristic headlights extend deep into the fenders, and the ridges on the hood give it a special look.

The Chevrolet Cruze wheel size is almost universal, maximally accessible to the buyer. Under the hood there are both petrol and diesel engines. An interesting option is the 1.4 turbocharged engine with 140 hp. With. and the most powerful two-liter diesel engine with 163 hp. With.