How to choose the right fan heater for a car

Car fans: TOP 10 best models

Review and descriptions of the highest quality car fans: top 10 models, their features, technical data, pros and cons. Video about a car fan for heating glass.

Despite the fact that almost all modern cars are equipped with air conditioning, fans will remain in demand and relevant for a long time.

The advantage of a small fan is that in the summer heat the driver can open the window, reduce battery wear and significantly reduce fuel consumption. In addition, the fan is safe for health, but the air conditioner must be systematically cleaned and refilled.

Most models on the market combine dual functions - fans have a warm and cold blowing system. Of course, the fan will not replace the stove, but will provide the driver with comfortable movement if the radiator is faulty. What are the best fan models the market can offer?

Rating of the best liquid fan heaters

Liquid devices first warm up the engine, and then the interior. They are installed in the engine compartment, connected to the fuel and cooling systems, as well as the electrical network. These types of heating systems are great for long trips. They are advisable in situations where the driver has to stand for quite a long time.

Webasto

The advantages of the pre-heater include comfortable use and reliability. The fan heater is easy to control; everything is done via a timer or a smartphone application. Thanks to remote control, the heater and car engine (which must be done in this order) can be started in advance before the time you have to leave. By following this sequence, it will be possible to increase the operating life of the main components of the machine. There is no need to wipe the windows, since moisture does not accumulate on the glass. The downside is the high price of the devices.

Eberspacher

The positive aspects are:

low noise level compared to analogues;
the ability to regulate intensity at any time;
strength;
the presence of a structure that protects against water penetration during washing.

The heat flow is adjusted in such a way that it cleans the windows of ice and snow very cleanly and in a short time. The disadvantage is that the model is expensive.

Best fans for cars

Elegant (EL 101507)

Budget class fan with dual air supply system. In winter it works as a fan heater, in summer it supplies cooled air within a radius of up to 70 cm.

The device is equipped with a 3-meter cord and can be installed with self-tapping screws on a vertical stand or attached to self-adhesive tape. The helix supplies air in two modes: FAN – ventilation, HEAT – warm airflow. The manufacturer emphasizes: the fan is not intended to completely heat the interior.

Mitchell 4.5

One of the best models in the mid-price segment is the Mitchell 4.5″ 12V 4W fan (HX-T701E). Minimum dimensions and weight 470 g. allow you to install the device on the dashboard or A-pillar. The air flow passes through the blades, the propeller size is 11.5 cm.

The fan has smooth speed adjustments and can rotate 360 degrees. Autonomous power supply is not provided, the device operates from a cigarette lighter, power – 4W.

The fan provides good cooling of the interior with minimal energy consumption, is attached with a vacuum suction cup, and can be easily reinstalled thanks to a long cable of 1.65 m.

Elegant double 8″ 24 V. EL 101 547

Another popular budget class model is a double fan from Poland. The fan has a 12-month warranty; when purchased in a specialized store, there is a return system.

The model has low power consumption and noise levels. A double fan is also chosen if the car is equipped with air conditioning or climate control; the double model allows you to open the windows and not feel the heat.

EL 101 547 has two fans in the block, each of which is separately regulated. The flow of cold air can be directed towards both the driver and the front passenger.

Each propeller has five blades, the total diameter of the propeller is 12.8 cm. The device consumes 15 W of power and operates on a 24 W network.

The fan is made of black plastic and is installed on the dashboard with double-sided tape.

AIRG Mitchell Fan HF-V998

The dual Mitchell Fan is mounted on both the dashboard and the ceiling of the vehicle. Device weight – 500 g, dimensions: 205x140x95 mm. Double-sided tape is used for installation.

Most often, the Mitchell Fan HF-V998 model is chosen by drivers of trucks and minibuses

. The device has a high blowing speed with a radius of up to 3 meters. Each screw rotates 360 degrees in the horizontal and vertical plane.

The fan is equipped with two separate screws, each of which is powered by an 8 V motor. The kit includes a 3-meter cable, powered by a 12V cigarette lighter, connected via a special connector.

Depending on the air temperature, you can configure one of two blowing speed modes separately for each unit.

Elegant 24 V., 150 W.

A universal budget-class model from Elegant works as a fan heater in winter and as a powerful air conditioner in hot weather. The compact model is equipped with a ceramic heating coil and has a retractable handle.

The fan is designed for a vehicle on-board voltage of 24 W, so it is often used by truck drivers. Installation of the block is carried out using self-tapping screws or self-adhesive tape.

Minimum weight 450 g. allows you to install the fan on the dashboard, racks; thanks to the 1.6-meter cable, the fan can be installed anywhere in the cabin. Quickly heats the windows in winter and cools the interior in summer.

The manufacturer warns that the model cannot be used instead of a car heater. For safe operation and to prevent overheating, the device is equipped with a fuse that turns off the fan when the current increases above 15 A.

EL 101 541 Elegant

The compact budget fan EL 101 541 Elegant remains one of the best in terms of performance. The propeller has three wide blades with a total diameter of 15 cm. The rotation area is protected by a coarse metal mesh.

Cools the interior well within a radius of 1 meter. Due to its light weight, it can be mounted with self-tapping screws on any flat surface.

The model is characterized by low power consumption, power is supplied from the cigarette lighter socket, the fan plug fits into a standard connector - there is no need to purchase an adapter.

The fan is equipped with a rotating mechanism, the rotation angle is 180 degrees, it is mounted with self-tapping screws on a flat surface, usually on the dashboard, the speed is started through a button on the block.

Which one to buy

The vast majority of devices come from China, but there are also domestically made fans. Among the most popular models:

AVS TE-310. Power - 150 W. Size: 120 x 110 x 60 mm. Power cord length: 1.8m. Can be used as a regular fan;
NEW GALAXY CH-180-LED. Power – 180 W. Has a built-in flashlight, rotating body;
SITITEK Termolux-150. Power – 150 W. Cable length – 2 m;
Auto Heater Fan. Power 140-150 W. Dimensions: 6.5 cm*15 cm*14.5 cm. Weight – 360 g. The declared maximum temperature is 35ºС. (the ambient air temperature at which the measurements were taken is not indicated). The device can operate both in cooling mode and for heating the car interior.

Selection options

To choose a truly high-quality fan for your car, pay attention to the following parameters:

the presence of a standard fuse, which will protect your car from fire or melted wiring;
heat-resistant plastic that does not emit a pungent odor when heated. If you have already purchased a device with poor quality plastic, let it work for a while while opening the car windows. And only then use it for its intended purpose;
a ceramic heating element is preferred since it does not burn oxygen;
power. Be sure to check what power the cigarette lighter network is designed for. A discrepancy will lead to melting of the fuse in the mounting block or the fuse of the cigarette lighter itself.

Article on the topic: The principle of operation of a vacuum brake booster

Description and principle of operation of a car fan with heating function

Quite often there are cases when in winter a car imported from Europe (especially one equipped with a turbo engine) takes quite a long time to warm up the interior (15-25 minutes). This phenomenon is associated with the small radiator of the stove, which is not designed for significant frost loads, common in Russian latitudes.

Therefore, for car owners with such problems, there is one correct solution - a car fan with a heating function.

Description and principle of operation of the device

The fan design consists of a cooler built into the housing of the heating element. The device is quite easy to use - when plugged into the cigarette lighter, it immediately begins to supply heat. Thus, the process of warming up the interior is reduced by 10-15 minutes.

The power of this device can vary from 140 to 1400 W.

There are products that differ in their functional structure:

used for blowing windshield and rear windows;
designed to heat the entire cabin.

The first type is a flat strip attached to the instrument panel or near the rear window; the airflow is targeted, but some of the heat also enters the cabin.

The second type is universal, has the ability to be attached anywhere, and also works from both the cigarette lighter and the on-board power supply. Such devices are often equipped with a handle and a built-in flashlight.

Universal fan with additional functions

The price of a middle-class car fan with heating function ranges from 500-1500 rubles.

There are also more expensive models on sale, costing up to 130 euros; for this money you can get the following advantages:

quick defrosting of frozen glass, eliminating the need to scrape off ice;
compact dimensions of the device that do not interfere with the process of controlling the machine;
function of adjusting the direction (horizontally, vertically) of heat flow with smooth power switching;
protection against overheating and increased fire safety class;
cooler operation mode for cooling;
additional functionality such as control panel, pre-start and others.

Types of heating elements

The following types of heating elements are found in interior heating devices:

filament coil;
heating element or tubular electric heater;
infrared element made of ceramic material.

Of the three types of devices, ceramic products are the most popular .

Since they have more advantages compared to their analogues:

increased level of fire safety;
speed at work;
convenient power switching;
do not require oxygen to function.

All types of heating elements are equipped with overheating protection, as well as the ability to operate from a 12 V network.

Design and types of car fans

A car fan consists of a housing and an electric motor, on the axis of which an impeller (fan) is mounted.

To protect the blades from foreign objects and damage to the device, a mesh is installed on top.

The casing has fasteners and, in some models, a rotating mechanism that ensures uniform airflow into the cabin.

There are three types of fans based on functionality and purpose:

"Hood"

Simple fans for blowing the interior . Such devices are simple in design and easy to maintain, but in winter there is no need to install them.

For heating and ventilation (combines two functions) . The advantage is versatility. In cold weather, with the help of such a fan it is possible to heat the interior, and in the summer - to provide high-quality airflow.

According to the type of mounting, fans are:

On the bracket

on the suction cup , which can be optionally mounted on the dashboard or windshield. The main problem is constant stalling when driving on bad roads.

on the clothespin that allows you to mount the device in any convenient place (on a sun visor, for example).

On the bar . Attached directly to a flexible rod.

By the presence of a rotating mechanism:

With the ability to rotate . During operation, such products change the direction of airflow in the range of 120-270 degrees (depending on the model). This ensures uniform cooling of all people in the cabin. Often such devices have a locking button to ensure the fan is locked in one place (if necessary).
Without the ability to turn . A distinctive feature is that it is fixed in one place. You can only change the direction of movement manually.

According to the voltage level, fans are:

At the connection location:

From the cigarette lighter;
From the stationary electrical system of the machine;
From solar panels.

The most popular fans for cars are powered from the cigarette lighter socket - for voltages of 12 and 24 Volts. Thanks to its special design, the device can be connected to any car, be it a car, truck or bus.

Models with a voltage of 12-24 Volts are universal, suitable for different types of cars with different voltage levels.

By blade diameter:

Compact (12-12.5 cm). Such models are installed on passenger cars and mounted in close proximity to the driver.

Medium (16 cm) - car fan, which is suitable for passenger cars and small trucks.
Large ones (21 cm and more) are a solution for buses and trucks.

With remote control;
With different operating modes;
With heating function;
With adjustable rotation speed and so on.

heated car fans in Moscow

In cold weather, you need to wait until the engine warms up, and only then can you turn on the interior heating. If there is high humidity and rain, you can’t hit the road right away, because the car windows are fogged up. And in the heat, the air in your car is hot for a long time even after starting.