What kind of oil to pour into the accent gearbox. When to change the oil in the transmission on the accent. When is it necessary to replace a manual transmission on a Hyundai Accent?

Any fluid in a car requires replacement within the interval established by the manufacturer. If you neglect this rule, then the components and assemblies of the car will not only over time begin to work differently than they should, but their complete failure is also possible.

Korean-made passenger car

The transmission system is no exception, namely its most important part – the gearbox. Regarding Hyundai cars, there is an opinion that changing the oil in their gearboxes is no more difficult than other cars, this also applies to the Accent model and modifications of the Tagaz plant.

Why change?

Of course, nowadays manufacturers of automotive chemicals conduct a lot of research and present a fairly high-quality product on the market. But due to the characteristics of the chemical components of different types of lubricants, over time the oil loses a number of its properties and does not fully perform its functions. Gearbox lubricant is no exception; over time, it also needs to be replaced.

After the loss of some properties of the lubricant, metal ones are not protected from mechanical damage during friction. It is also important that due to the same friction, a sediment of small metal particles appears in the oil, which subsequently have a detrimental effect on the internal mechanisms.

Selecting manual transmission oil for replacement

When choosing a lubricant for changing your Accent manual transmission, you need to consider a number of the following aspects:

car mileage;
oil that was previously used to lubricate parts;
temperature conditions of vehicle operation.

If the mileage of your car is very high and the rubber components of the gearbox no longer have their original properties, then using a synthetic lubricant does not make sense. Also, if previously it was used to lubricate gearbox parts, then before changing the seals there is no point in using synthetics because there will be a 100% leak.

Among modern manufacturers of automotive chemicals, products from the following companies are suitable for Hyundai Accent: Castrol, Liqui Moly, Motul, Ravenol, as well as original lubricant from the manufacturer Hyundai/Kia.

What kind of oil to fill in the Hyundai Accent gearbox

Hyundai Accent is one of the most affordable foreign cars in Russia. Owners continue to buy this car, despite its relatively outdated design. But on the other hand, the machine is quite easy to repair and maintain. Accent does not require large financial outlays, and this is confirmed by motorists in their real reviews. The possibility of self-service is very good, but in some cases it is difficult to decide on the choice of suitable consumables - for example, gear oil. In this article we will look at how to choose the right oil for a Hyundai Accent manual transmission.

Oil functions

Transmission oil is designed to prevent mechanical wear of the internal parts of the box. At the very least, with the help of high-quality ATF, you can at least avoid premature wear of transmission components. That is why it is very important that the fluid meets all the parameters in the instructions and is as compatible as possible with the Hyundai Accent transmission. Failure to comply with at least one of the rules can lead to irreversible consequences, including failure of the entire transmission unit. So, the main function of the oil is to prevent wear of parts in the gearbox.

Types of oils

Synthetic is the best option for Hyundai Accent. This is a more fluid and rare oil that never freezes. This makes it the best option for use in frosty conditions. Synthetic lubricant consists of environmentally friendly impurities. So, these are mainly light hydrocarbons and natural compounds. Synthetics have the most universal viscosity grade, making them suitable for any climate. The main disadvantage of synthetic oil is, of course, its high cost.
Semi-synthetics are an optimal lubricant composition, the main components of which are synthetics and mineral oil. To be more precise, such oil is made by mixing both types of lubricants in a ratio of 30 to 70 in favor of mineral oil. This method allows you to significantly reduce the cost of the product. And yet, such oil will not be the best choice even for such an inexpensive foreign car as the Hyundai Solaris. On the other hand, choosing semi-synthetics will only be justified if the car has a very high mileage
Mineral oil is the cheapest of all the lubricants presented. Used only for old cars with high mileage. This is not only the most affordable, but also the thickest oil. Because of this, it is not recommended to fill it at sub-zero temperatures.

Quality standard

There are certain markings that can be used to determine whether an oil meets a particular quality standard. For example, according to the American API standard, there are two groups of oils - GL4 and GL5. Fluid marked GL5 has many more useful additives that provide extreme pressure properties. In addition to GL4 and GL5, there is also the marking GL4/5, which indicates a universal type. Another quality standard is the so-called SAE. It is used to determine the viscosity-temperature properties of the oil. The SAE standard also has different markings, for example 75W90. Oil with this viscosity is considered the best option for not too cold winters, and is also suitable for high temperatures.

The best oils for Hyundai Accent

Lukoil TM4/TM5 with viscosity parameters 75W90 or 80W90 is the best option for a manual transmission. This oil has a moderate cost and excellent resistance to wide temperature ranges. Lukoil TM4/TM5 is one of the best semi-synthetic oils on the world market

ZIK G-FTop 75W90 is a synthetic oil, which in 2020 was recognized as the best product in its price category. This oil has very good protective, anti-friction and extreme pressure properties. In addition, the cost of this product is not too high compared to premium brands
Castrol Syntrans Transaxle 75W90 is another best option for Hyundai Accent. The beneficial properties of this oil have a beneficial effect on the cooling of gearbox components. With such a lubricant, the gearbox will not overheat, and will always delight the owner with clear shifts for a long time. Has excellent anti-scuff characteristics
Liqui Moly Hypoid-Getriebeoil TDL 75W90 is a semi-synthetic universal oil, classified as GL4/GL5. It does an excellent job of cooling gearbox components, preventing them from overheating, and ensuring smooth and precise gear shifts. The advantages of this oil are good heat resistance and corrosion resistance.

Conclusion

Hyundai Accent is a budget foreign car, but this does not mean that any oil will suit its gearbox. As you can see, choosing an oil is not an easy procedure, requiring knowledge of various parameters - for example, the degree of viscosity and compliance with certain quality standards. All suitable parameters are in the instructions for the Hyundai Accent. Having studied them, you will not have any problems choosing the appropriate lubricant for the Hyundai Accent manual transmission.

Replacement video

maslospec.ru

Algorithm for changing oil in manual transmission Hyundai Accent

First of all, you need to find the drain and fill plugs. Usually these are the two largest bolts located on different sides. The drain plug is located at the very bottom of the box body, closer to the car's cabin itself, and the filler plug is located closer to the front of the car. After we have found the bolts we need, we unscrew the drain plug and substitute the vessel we prepared earlier. You can also unscrew the other plug so that the used lubricant drains out faster. After the insides of the gearbox are completely emptied of the old lubricating fluid, you need to tighten the drain plug and you can begin to fill the new oil back in. You need to use a special syringe. After the filling process is completed, tighten the filler plug.

Basically, about 2 liters of lubricant are placed in the mechanics of a Hyundai Accent. As you can see, you need to do everything carefully so that you don’t also have to clean everything that was touched by the mining later.

We show you how to change the oil in a manual gearbox of a Hyundai Accent 2 with your own hands. The oil from the box, as well as from the engine, must be drained when hot, i.e. We drive 5-10 km before the procedure. The drain plug is unscrewed with a 24mm wrench; it is located to the left of the engine. Under the drain plug there was an aluminum ring that was stuck to the box, we tear it off and replace it with a copper one:

Our drain plug is magnetic, this is done in order to collect metal shavings, be sure to clean it. Then we screw it back. Using a “carburetor cleaner,” we clean the box body from dirt and oil. Unscrew this bolt:

And pour oil through the resulting hole. We take either a funnel with a long hose or a syringe, whichever is more convenient for you. We will fill in ZIC 75w90, which is completely synthetic; you need to fill in 2 liters of 150 grams. There is also an aluminum washer on the filler neck bolt, replace it with a copper one. Tighten at the right moment.

Video of changing the oil in a manual transmission manual transmission Hyundai Accent 2:

Backup video on how to change the oil in a Hyundai Accent 2 manual transmission:

Many people do not understand why it is necessary to change the oil in a manual transmission at all; the fact is that each oil has its own service life; for transmission oil it is 2-3 years or 60 thousand km. mileage After this, it begins to lose its properties and exposes the box mechanisms to greater wear.

Contrary to popular belief, the oil in a manual transmission still needs to be changed. Yes, it begins to lose its properties much later than motor oil, but it still loses. Therefore, an oil change in the Hyundai Accent manual transmission will be needed sooner or later. However, it is not difficult to do it yourself.

Advantages of repairing a Hyundai Accent manual transmission at the PolomokNet car service center

The process of changing the oil and repairing a manual gearbox requires professional experience, certain skills and special tools.
with many years of experience, he will perform maintenance and oil changes in Hyundai manual transmissions with a guarantee for the work performed. Experienced specialists of the PolomokNet car service center in the Eastern Administrative District of Moscow will help eliminate any car malfunction. When the owner of a Hyundai Accent passenger car begins to worry about changing the transmission oil in a manual transmission, he needs to look at the service book. And it says that the first oil change should be carried out when the car reaches a mileage of 90 thousand kilometers. Then two more questions arise. How much oil is required to fill the manual transmission crankcase and what brand of oil to purchase.

The answer to the first question is simple, since the volume of oil poured into the Hyundai Accent manual transmission crankcase has always been 2.15 liters. Considering that gear oil is pre-sold in one-liter cans, you will have to buy three of them. On the one hand, this is good, since pouring oil into the manual transmission crankcase is not very convenient and some of it may spill. But there is no clear answer to the last question, since not all owners of this car adhere to the manufacturer’s recommendations, which advises using HYUNDAI GENUINE PARTS MTF oil of viscosity class SAE 75W-90 and API group not lower than GL-4.

Changing the oil in a manual transmission crankcase is not so difficult; even the driver himself can do it. You just need to do this work immediately after the trip, while the oil is hot, since in this case it will drain faster and more completely. Therefore, you need to prepare for an oil change in advance.

To do this you will need:

a pair of open-end or ring wrenches (24 and 17) for unscrewing the drain and oil filler plugs;
an old canister with a cut off top to drain used oil into;
a funnel with a piece of hose attached to it for pouring fresh oil.

First, unscrew the plug screwed into the hole, through which you will then pour fresh oil. This must be done so that the oil drains faster. Then unscrew the drain plug and clean off any metal particles or transmission wear products adhering to it. While the oil is draining, check the condition of the aluminum sealing washers on both plugs. If they are severely crushed, they should be replaced to prevent oil leakage through these holes. As soon as the oil has drained, tighten the drain plug. Insert the end of the hose into the filler hole and pour oil through the funnel until it flows out. All that remains is to tighten the oil filler plug.

According to popular belief, the transmission fluid in a manual transmission does not require replacement, but this is not at all true. Often it retains its performance properties much longer than in an automatic transmission, but over time they can still deteriorate. That is why it is still worth replacing the oil fluid in the Hyundai Accent manual transmission.

The recommended limit for changing the fluid in a manual transmission according to the maintenance regulations is every 90 thousand kilometers. Necessary conditions for work are the presence of an overpass or inspection hole. You should plan ahead to change the transmission fluid after a relatively long drive.

Replacement is required in order to eliminate heaviness in gear shifting, extraneous uncharacteristic noise and various problems in the manual transmission. Replacing the transmission lubricant in the gearbox must be done regularly in accordance with the regulations, otherwise oil starvation will make itself felt by various disturbances in the vehicle system.

The oil volume poured into this type of manual transmission is 2.15 liters. As for the characteristics, you should choose API GL-4 class oils; the most acceptable option would be Hyundai Genuine Parts MTF 75W/85. SAE 75W/85 or HD GEAR OIL XLS 75W/85 are also suitable.

In order to change the used transmission fluid, you will need the standard tools for this procedure, and, in addition to them, a supercharger. It is recommended to carry out the work using an overpass or inspection hole, having previously securely secured the car to insure against spontaneous rolling.

Sometimes experienced motorists advise, in the absence of such equipment, to park the car on a slope. However, such actions may be ineffective, since in this case there is a high probability that the oil from the automatic transmission will not be completely drained.

How to change the oil in an Accent box

The principle of changing the oil in a box is in many ways similar to - the oil is drained onto a warm engine, after a short trip

. The car should be parked on a pit or overpass.

Next, you need to place a container for old oil and unscrew the drain plug with a 24 key. While the oil is draining, you can work on the drain plug - it is magnetic, so it does not interfere with cleaning it. You also need to replace the washer on it. After the oil has drained, you can screw the plug back on. Tightening torque - 30-35 Nm.

Then you need to pour oil into the box. To do this, unscrew the filler plug and use a syringe or funnel with a hose to fill in new oil. The washer on the filler plug also needs to be changed.

, then screw the plug back. Tightening torque - 25-30 Nm.

Lubrication allows the Hyundai Accent transmission to operate smoothly and effectively change torque. The functioning of mechanics/automation is directly dependent on the properties of the motor oil that is poured into it.

Changing the oil in a Hyundai Accent gearbox
must be done correctly and in a timely manner.
Only in this case will your vehicle last a long time.

Hyundai Accent transmission fluid replacement process

Changing the oil in a Hyundai Accent manual transmission can be done with your own hands. To replace it, it is still advisable to put the car on special equipment. Before this, you need to prepare the necessary tools:

A set of necessary keys;
Special container for draining used lubricant;
Flat head screwdriver;
Funnel;
Cutter;
Rags.

Once all the tools are ready and the vehicle is installed on the inspection equipment, you can begin the oil change process:

Be sure to measure the oil level. If it turns out to be insufficient, you should add more. If there is too much liquid, some must be drained. After installing the filler plug, you must again make a short trip while switching gears, and then again take a control measurement of the oil level.

A passenger car is a complex combination of interconnected components and mechanisms. The gearbox serves to regulate the transfer of kinetic energy from the engine to the wheels of the car and requires periodic maintenance. During operation, it is necessary to change the oil in the Accent gearbox; the parts of the box are exposed to the friction force that occurs when the planes of various gears, shafts, and synchronizers come into contact. To ensure sufficient sliding and rotation of manual transmission working units, motorist designers are improving the lubrication system of modern cars. Hyundai Accent is equipped with a modern five-speed manual transmission, which requires maintenance and oil changes during operation.

Selection of oil fluid and required tools

Today there are many different lubricants for Accent gearboxes. They are divided into categories according to the accepted specifications. You need to be able to choose the right lubricant for a particular car.

If you read the operating manual, you can understand what consumables the car manufacturer recommends to put into the Hyundai Accent automatic. These are Mitsubishi Diamond SP-3 and ZIK SP-3. The car manufacturer is not responsible for the consequences of using oil fluids other than those specified.

The frequency with which it is necessary to change the oil in the Accent manual transmission is ninety thousand kilometers or once every six years. It is advisable to use “Hyundai Genuine Pats 75w85”, “TGO-7”, “ZIK GF TOP 75w85”.

To change the oil in an automatic/manual transmission you will need:

pallet cover;
sealant;
Hyundai oil filter;
funnel;
fuel hose;
flat screwdriver;
key "for seventeen";
thin ten-point wrench with extension;
hammer;
wooden beam;
buckets for old grease.

Step-by-step procedure for changing oil in a manual transmission

Draining old oil from a manual transmission in a Hyundai Accent occurs according to the following scheme:

Washing the pan:

Unscrew the pan. Carefully drain off any remaining oil. Clean the surface with a wire brush and wipe with a clean cloth.
Screw the tray back on.

Step-by-step instructions for filling new oil in a Hyundai Accent manual transmission:

Unscrew the filler plug with a 17 key.
Fill in new transmission oil with a syringe to the required level.
Tighten the filler plug with a 17mm wrench.
Start the car, drive a test 10-15 kilometers and re-install the vehicle on a flat surface.
Check the oil level and top up if necessary.

It is necessary to check the oil level once every 10 thousand kilometers. The procedure helps to find leaks if they appear. You can control the oil level through the inspection hole.

Replacement algorithm

Automation

It is worth noting that it is possible to change the oil in a Hyundai Accent automatic transmission either completely or partially. Next, you can familiarize yourself with the full shift algorithm. It looks complicated, but in reality the procedure is quite easy, although it takes a lot of time. To make it easier to change the oil in the box yourself, you can call a partner.

Mechanics

Warm up the internal combustion engine.
Place the machine on a ditch/overpass.
Place a bucket under the drain.
Unscrew the drain cap using a twenty-four wrench.
While the old oil is pouring out, clean the drain cover and change the washer.
Screw the cap with a force of 30-35 Nm.
Unscrew the oil filler cap.
Using a syringe or funnel with a hose, pour fresh consumables into the gearbox.

Replace the washer, close the lid. The tightening force should be 25-30 Nm.

Hyundai Accent, produced at the TagAZ plant in 2001-2012, was equipped with a 1.5-liter 16-valve engine producing 102 hp, 5-speed manual or 4-speed automatic transmissions.

The automaker recommends changing the oil in the Accent gearbox at least once every 90,000 km in cars with both manual and automatic transmissions. What kind of oil to fill into the Accent gearbox when replacing depends on the type of transmission.

Step by step replacement

1. Jack up the left side of the car and place the wheels under the wheels, and do the same on the right side. In the photo below you can see what it looks like.

After this manipulation, the car rises and access to the gearbox appears.

Don't forget to tighten the handbrake after installing the car this way.

2. In order for the oil to drain faster, you need to unscrew the oil filler neck bolt. To gain access to the bolt, you need to dismantle the plastic casing that is responsible for air intake. It is secured with two bolts.

Unscrew the bolts and remove the casing.

3. After dismantling the casing, we see the oil filler neck bolt. We unscrew the bolt with a 17 mm socket or wrench.

Before unscrewing the bolt, place a basin for oil under it.

4. Unscrew the drain bolt with a twenty-four wrench or socket.

Don't forget to substitute a basin.

5. Screw in and tighten the new drain bolt with a new O-ring.

6. Take a funnel with a hose and insert the hose into the hole in the filler neck.

7. The box contains 2150 milliliters of oil. We pour two liters at once, and measure out 150 milliliters and pour them.

8. Wrap and tighten the filler neck bolt with a new ring.

9. We mount and secure the air intake casing.

The oil volume poured into this type of manual transmission is 2.15 liters. As for the characteristics, you should choose API GL-4 class oils; the most acceptable option would be Hyundai Genuine Parts MTF 75W/85. SAE 75W/85 or HD GEAR OIL XLS 75W/85 are also suitable.

Gearbox oil for Hyundai Accent with manual transmission

In accordance with the car manufacturer's instructions specified in the operating instructions, it is recommended to use Hyundai Accent manual transmission oil with a viscosity of 75W90 with an API GL-4 property level. 100% synthetic transmission oil TOTAL TRANSMISSION DUAL 9 FE 75W90 has excellent extreme pressure properties and guarantees protection of manual transmissions from wear and corrosion in all conditions. FUEL ECONOMY technology provides reduced fuel consumption compared to standard gear oils. TOTAL TRANSMISSION DUAL 9 FE 75W90 meets API GL-4, GL-5 and MT-1 quality standards, therefore TOTAL recommends pouring this oil into the Hyundai Accent gearbox, including those used in severe conditions.

Generation III (2006-2010)

Engine D4FA 1.5 with manual gearbox

What kind of engine oil to fill in a manual transmission: API GL-5, SAE 75W90
How many liters of oil (total volume): 2.0 liters.
When to change the oil: 90 thousand km with a partial change at 30-40 thousand km

Engine G4ER 1.5 with manual gearbox

What kind of engine oil to fill in a manual transmission: API GL-4, SAE 75W90
How many liters of oil (total volume): 2.15 liters.
When to change the oil: 90 thousand km with a partial change at 30-40 thousand km

Automatic transmission oil Hyundai Accent

The automaker recommends using oil in Accent automatic transmissions with Hyundai SP-III performance level. ATF TOTAL FLUIDE XLD FE has excellent performance characteristics and meets SP-III requirements, so TOTAL recommends pouring this oil into the Accent automatic transmission during service. Its frictional properties ensure riding comfort and smooth gear shifts, as well as reliable lubrication of all transmission elements. High oxidative and thermal stability prevents changes in oil characteristics and the formation of deposits and guarantees reliable protection of the gearbox from wear throughout the entire service interval. The anti-foam properties of TOTAL FLUIDE XLD FE and good compatibility with sealing materials ensure the effectiveness of this oil in Hyundai Accent automatic transmissions under any transmission operating conditions.